ASoC: Support separate left and right channel dcs_codes values
Some devices can have performance optimized by setting different offsets
for left and right channels.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 84a84f4..26e21d0 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -179,18 +179,19 @@
dev_dbg(codec->dev, "DCS input: %x %x\n", reg_l, reg_r);
/* Apply correction to DC servo result */
- if (hubs->dcs_codes) {
- dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
- hubs->dcs_codes);
+ if (hubs->dcs_codes_l || hubs->dcs_codes_r) {
+ dev_dbg(codec->dev,
+ "Applying %d/%d code DC servo correction\n",
+ hubs->dcs_codes_l, hubs->dcs_codes_r);
/* HPOUT1R */
offset = reg_r;
- offset += hubs->dcs_codes;
+ offset += hubs->dcs_codes_r;
dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
/* HPOUT1L */
offset = reg_l;
- offset += hubs->dcs_codes;
+ offset += hubs->dcs_codes_l;
dcs_cfg |= (u8)offset;
dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);
@@ -228,7 +229,7 @@
/* If we're applying an offset correction then updating the
* callibration would be likely to introduce further offsets. */
- if (hubs->dcs_codes || hubs->no_series_update)
+ if (hubs->dcs_codes_l || hubs->dcs_codes_r || hubs->no_series_update)
return ret;
/* Only need to do this if the outputs are active */