charger-manager: Set current limit of regulator for over current protection
This patch support the protection of host device from over current.
The Charger-manager set proper current limit of charger(regulator) for
charging according to type of charger cable when external connector
is attached.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index d1e99e7..526e5c9 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -1001,6 +1001,21 @@
{
struct charger_cable *cable =
container_of(work, struct charger_cable, wq);
+ int ret;
+
+ if (cable->attached && cable->min_uA != 0 && cable->max_uA != 0) {
+ ret = regulator_set_current_limit(cable->charger->consumer,
+ cable->min_uA, cable->max_uA);
+ if (ret < 0) {
+ pr_err("Cannot set current limit of %s (%s)\n",
+ cable->charger->regulator_name, cable->name);
+ return;
+ }
+
+ pr_info("Set current limit of %s : %duA ~ %duA\n",
+ cable->charger->regulator_name,
+ cable->min_uA, cable->max_uA);
+ }
try_charger_enable(cable->cm, cable->attached);
}