| /* | 
 |  * linux/arch/arm/mach-omap2/io.c | 
 |  * | 
 |  * OMAP2 I/O mapping code | 
 |  * | 
 |  * Copyright (C) 2005 Nokia Corporation | 
 |  * Copyright (C) 2007-2009 Texas Instruments | 
 |  * | 
 |  * Author: | 
 |  *	Juha Yrjola <juha.yrjola@nokia.com> | 
 |  *	Syed Khasim <x0khasim@ti.com> | 
 |  * | 
 |  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/io.h> | 
 | #include <linux/clk.h> | 
 |  | 
 | #include <asm/tlb.h> | 
 | #include <asm/mach/map.h> | 
 |  | 
 | #include <linux/omap-dma.h> | 
 |  | 
 | #include "omap_hwmod.h" | 
 | #include "soc.h" | 
 | #include "iomap.h" | 
 | #include "voltage.h" | 
 | #include "powerdomain.h" | 
 | #include "clockdomain.h" | 
 | #include "common.h" | 
 | #include "clock.h" | 
 | #include "clock2xxx.h" | 
 | #include "clock3xxx.h" | 
 | #include "clock44xx.h" | 
 | #include "omap-pm.h" | 
 | #include "sdrc.h" | 
 | #include "control.h" | 
 | #include "serial.h" | 
 | #include "sram.h" | 
 | #include "cm2xxx.h" | 
 | #include "cm3xxx.h" | 
 | #include "prm.h" | 
 | #include "cm.h" | 
 | #include "prcm_mpu44xx.h" | 
 | #include "prminst44xx.h" | 
 | #include "cminst44xx.h" | 
 | #include "prm2xxx.h" | 
 | #include "prm3xxx.h" | 
 | #include "prm44xx.h" | 
 |  | 
 | /* | 
 |  * omap_clk_init: points to a function that does the SoC-specific | 
 |  * clock initializations | 
 |  */ | 
 | int (*omap_clk_init)(void); | 
 |  | 
 | /* | 
 |  * The machine specific code may provide the extra mapping besides the | 
 |  * default mapping provided here. | 
 |  */ | 
 |  | 
 | #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) | 
 | static struct map_desc omap24xx_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= L3_24XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L3_24XX_PHYS), | 
 | 		.length		= L3_24XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_24XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_24XX_PHYS), | 
 | 		.length		= L4_24XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP2420 | 
 | static struct map_desc omap242x_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= DSP_MEM_2420_VIRT, | 
 | 		.pfn		= __phys_to_pfn(DSP_MEM_2420_PHYS), | 
 | 		.length		= DSP_MEM_2420_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= DSP_IPI_2420_VIRT, | 
 | 		.pfn		= __phys_to_pfn(DSP_IPI_2420_PHYS), | 
 | 		.length		= DSP_IPI_2420_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= DSP_MMU_2420_VIRT, | 
 | 		.pfn		= __phys_to_pfn(DSP_MMU_2420_PHYS), | 
 | 		.length		= DSP_MMU_2420_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | }; | 
 |  | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP2430 | 
 | static struct map_desc omap243x_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= L4_WK_243X_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_WK_243X_PHYS), | 
 | 		.length		= L4_WK_243X_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= OMAP243X_GPMC_VIRT, | 
 | 		.pfn		= __phys_to_pfn(OMAP243X_GPMC_PHYS), | 
 | 		.length		= OMAP243X_GPMC_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= OMAP243X_SDRC_VIRT, | 
 | 		.pfn		= __phys_to_pfn(OMAP243X_SDRC_PHYS), | 
 | 		.length		= OMAP243X_SDRC_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= OMAP243X_SMS_VIRT, | 
 | 		.pfn		= __phys_to_pfn(OMAP243X_SMS_PHYS), | 
 | 		.length		= OMAP243X_SMS_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | }; | 
 | #endif | 
 | #endif | 
 |  | 
 | #ifdef	CONFIG_ARCH_OMAP3 | 
 | static struct map_desc omap34xx_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= L3_34XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L3_34XX_PHYS), | 
 | 		.length		= L3_34XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_34XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_34XX_PHYS), | 
 | 		.length		= L4_34XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= OMAP34XX_GPMC_VIRT, | 
 | 		.pfn		= __phys_to_pfn(OMAP34XX_GPMC_PHYS), | 
 | 		.length		= OMAP34XX_GPMC_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= OMAP343X_SMS_VIRT, | 
 | 		.pfn		= __phys_to_pfn(OMAP343X_SMS_PHYS), | 
 | 		.length		= OMAP343X_SMS_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= OMAP343X_SDRC_VIRT, | 
 | 		.pfn		= __phys_to_pfn(OMAP343X_SDRC_PHYS), | 
 | 		.length		= OMAP343X_SDRC_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_PER_34XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_PER_34XX_PHYS), | 
 | 		.length		= L4_PER_34XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_EMU_34XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_EMU_34XX_PHYS), | 
 | 		.length		= L4_EMU_34XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | #if defined(CONFIG_DEBUG_LL) &&							\ | 
 | 	(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) | 
 | 	{ | 
 | 		.virtual	= ZOOM_UART_VIRT, | 
 | 		.pfn		= __phys_to_pfn(ZOOM_UART_BASE), | 
 | 		.length		= SZ_1M, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | #endif | 
 | }; | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_TI81XX | 
 | static struct map_desc omapti81xx_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= L4_34XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_34XX_PHYS), | 
 | 		.length		= L4_34XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	} | 
 | }; | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_AM33XX | 
 | static struct map_desc omapam33xx_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= L4_34XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_34XX_PHYS), | 
 | 		.length		= L4_34XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_WK_AM33XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_WK_AM33XX_PHYS), | 
 | 		.length		= L4_WK_AM33XX_SIZE, | 
 | 		.type		= MT_DEVICE | 
 | 	} | 
 | }; | 
 | #endif | 
 |  | 
 | #ifdef	CONFIG_ARCH_OMAP4 | 
 | static struct map_desc omap44xx_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= L3_44XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L3_44XX_PHYS), | 
 | 		.length		= L3_44XX_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_44XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_44XX_PHYS), | 
 | 		.length		= L4_44XX_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_PER_44XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS), | 
 | 		.length		= L4_PER_44XX_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | #ifdef CONFIG_OMAP4_ERRATA_I688 | 
 | 	{ | 
 | 		.virtual	= OMAP4_SRAM_VA, | 
 | 		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA), | 
 | 		.length		= PAGE_SIZE, | 
 | 		.type		= MT_MEMORY_SO, | 
 | 	}, | 
 | #endif | 
 |  | 
 | }; | 
 | #endif | 
 |  | 
 | #ifdef	CONFIG_SOC_OMAP5 | 
 | static struct map_desc omap54xx_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= L3_54XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L3_54XX_PHYS), | 
 | 		.length		= L3_54XX_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_54XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_54XX_PHYS), | 
 | 		.length		= L4_54XX_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_WK_54XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_WK_54XX_PHYS), | 
 | 		.length		= L4_WK_54XX_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | 	{ | 
 | 		.virtual	= L4_PER_54XX_VIRT, | 
 | 		.pfn		= __phys_to_pfn(L4_PER_54XX_PHYS), | 
 | 		.length		= L4_PER_54XX_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | #ifdef CONFIG_OMAP4_ERRATA_I688 | 
 | 	{ | 
 | 		.virtual	= OMAP4_SRAM_VA, | 
 | 		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA), | 
 | 		.length		= PAGE_SIZE, | 
 | 		.type		= MT_MEMORY_SO, | 
 | 	}, | 
 | #endif | 
 | }; | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP2420 | 
 | void __init omap242x_map_io(void) | 
 | { | 
 | 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); | 
 | 	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP2430 | 
 | void __init omap243x_map_io(void) | 
 | { | 
 | 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); | 
 | 	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_ARCH_OMAP3 | 
 | void __init omap3_map_io(void) | 
 | { | 
 | 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_TI81XX | 
 | void __init ti81xx_map_io(void) | 
 | { | 
 | 	iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc)); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_AM33XX | 
 | void __init am33xx_map_io(void) | 
 | { | 
 | 	iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_ARCH_OMAP4 | 
 | void __init omap4_map_io(void) | 
 | { | 
 | 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); | 
 | 	omap_barriers_init(); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP5 | 
 | void __init omap5_map_io(void) | 
 | { | 
 | 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); | 
 | 	omap_barriers_init(); | 
 | } | 
 | #endif | 
 | /* | 
 |  * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters | 
 |  * | 
 |  * Sets the CORE DPLL3 M2 divider to the same value that it's at | 
 |  * currently.  This has the effect of setting the SDRC SDRAM AC timing | 
 |  * registers to the values currently defined by the kernel.  Currently | 
 |  * only defined for OMAP3; will return 0 if called on OMAP2.  Returns | 
 |  * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2, | 
 |  * or passes along the return value of clk_set_rate(). | 
 |  */ | 
 | static int __init _omap2_init_reprogram_sdrc(void) | 
 | { | 
 | 	struct clk *dpll3_m2_ck; | 
 | 	int v = -EINVAL; | 
 | 	long rate; | 
 |  | 
 | 	if (!cpu_is_omap34xx()) | 
 | 		return 0; | 
 |  | 
 | 	dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck"); | 
 | 	if (IS_ERR(dpll3_m2_ck)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rate = clk_get_rate(dpll3_m2_ck); | 
 | 	pr_info("Reprogramming SDRC clock to %ld Hz\n", rate); | 
 | 	v = clk_set_rate(dpll3_m2_ck, rate); | 
 | 	if (v) | 
 | 		pr_err("dpll3_m2_clk rate change failed: %d\n", v); | 
 |  | 
 | 	clk_put(dpll3_m2_ck); | 
 |  | 
 | 	return v; | 
 | } | 
 |  | 
 | static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) | 
 | { | 
 | 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); | 
 | } | 
 |  | 
 | static void __init omap_hwmod_init_postsetup(void) | 
 | { | 
 | 	u8 postsetup_state; | 
 |  | 
 | 	/* Set the default postsetup state for all hwmods */ | 
 | #ifdef CONFIG_PM_RUNTIME | 
 | 	postsetup_state = _HWMOD_STATE_IDLE; | 
 | #else | 
 | 	postsetup_state = _HWMOD_STATE_ENABLED; | 
 | #endif | 
 | 	omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); | 
 |  | 
 | 	omap_pm_if_early_init(); | 
 | } | 
 |  | 
 | static void __init omap_common_late_init(void) | 
 | { | 
 | 	omap_mux_late_init(); | 
 | 	omap2_common_pm_late_init(); | 
 | 	omap_soc_device_init(); | 
 | } | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP2420 | 
 | void __init omap2420_init_early(void) | 
 | { | 
 | 	omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000)); | 
 | 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), | 
 | 			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE)); | 
 | 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), | 
 | 				  NULL); | 
 | 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE)); | 
 | 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL); | 
 | 	omap2xxx_check_revision(); | 
 | 	omap2xxx_prm_init(); | 
 | 	omap2xxx_cm_init(); | 
 | 	omap2xxx_voltagedomains_init(); | 
 | 	omap242x_powerdomains_init(); | 
 | 	omap242x_clockdomains_init(); | 
 | 	omap2420_hwmod_init(); | 
 | 	omap_hwmod_init_postsetup(); | 
 | 	omap_clk_init = omap2420_clk_init; | 
 | } | 
 |  | 
 | void __init omap2420_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap2_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP2430 | 
 | void __init omap2430_init_early(void) | 
 | { | 
 | 	omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000)); | 
 | 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), | 
 | 			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE)); | 
 | 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), | 
 | 				  NULL); | 
 | 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE)); | 
 | 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL); | 
 | 	omap2xxx_check_revision(); | 
 | 	omap2xxx_prm_init(); | 
 | 	omap2xxx_cm_init(); | 
 | 	omap2xxx_voltagedomains_init(); | 
 | 	omap243x_powerdomains_init(); | 
 | 	omap243x_clockdomains_init(); | 
 | 	omap2430_hwmod_init(); | 
 | 	omap_hwmod_init_postsetup(); | 
 | 	omap_clk_init = omap2430_clk_init; | 
 | } | 
 |  | 
 | void __init omap2430_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap2_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * Currently only board-omap3beagle.c should call this because of the | 
 |  * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT. | 
 |  */ | 
 | #ifdef CONFIG_ARCH_OMAP3 | 
 | void __init omap3_init_early(void) | 
 | { | 
 | 	omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000)); | 
 | 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), | 
 | 			       OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE)); | 
 | 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), | 
 | 				  NULL); | 
 | 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE)); | 
 | 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL); | 
 | 	omap3xxx_check_revision(); | 
 | 	omap3xxx_check_features(); | 
 | 	omap3xxx_prm_init(); | 
 | 	omap3xxx_cm_init(); | 
 | 	omap3xxx_voltagedomains_init(); | 
 | 	omap3xxx_powerdomains_init(); | 
 | 	omap3xxx_clockdomains_init(); | 
 | 	omap3xxx_hwmod_init(); | 
 | 	omap_hwmod_init_postsetup(); | 
 | 	omap_clk_init = omap3xxx_clk_init; | 
 | } | 
 |  | 
 | void __init omap3430_init_early(void) | 
 | { | 
 | 	omap3_init_early(); | 
 | } | 
 |  | 
 | void __init omap35xx_init_early(void) | 
 | { | 
 | 	omap3_init_early(); | 
 | } | 
 |  | 
 | void __init omap3630_init_early(void) | 
 | { | 
 | 	omap3_init_early(); | 
 | } | 
 |  | 
 | void __init am35xx_init_early(void) | 
 | { | 
 | 	omap3_init_early(); | 
 | } | 
 |  | 
 | void __init ti81xx_init_early(void) | 
 | { | 
 | 	omap2_set_globals_tap(OMAP343X_CLASS, | 
 | 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); | 
 | 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), | 
 | 				  NULL); | 
 | 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); | 
 | 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); | 
 | 	omap3xxx_check_revision(); | 
 | 	ti81xx_check_features(); | 
 | 	omap3xxx_voltagedomains_init(); | 
 | 	omap3xxx_powerdomains_init(); | 
 | 	omap3xxx_clockdomains_init(); | 
 | 	omap3xxx_hwmod_init(); | 
 | 	omap_hwmod_init_postsetup(); | 
 | 	omap_clk_init = omap3xxx_clk_init; | 
 | } | 
 |  | 
 | void __init omap3_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap3_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 |  | 
 | void __init omap3430_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap3_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 |  | 
 | void __init omap35xx_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap3_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 |  | 
 | void __init omap3630_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap3_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 |  | 
 | void __init am35xx_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap3_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 |  | 
 | void __init ti81xx_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap3_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_AM33XX | 
 | void __init am33xx_init_early(void) | 
 | { | 
 | 	omap2_set_globals_tap(AM335X_CLASS, | 
 | 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); | 
 | 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), | 
 | 				  NULL); | 
 | 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE)); | 
 | 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); | 
 | 	omap3xxx_check_revision(); | 
 | 	ti81xx_check_features(); | 
 | 	am33xx_voltagedomains_init(); | 
 | 	am33xx_powerdomains_init(); | 
 | 	am33xx_clockdomains_init(); | 
 | 	am33xx_hwmod_init(); | 
 | 	omap_hwmod_init_postsetup(); | 
 | 	omap_clk_init = am33xx_clk_init; | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_ARCH_OMAP4 | 
 | void __init omap4430_init_early(void) | 
 | { | 
 | 	omap2_set_globals_tap(OMAP443X_CLASS, | 
 | 			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE)); | 
 | 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), | 
 | 				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE)); | 
 | 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE)); | 
 | 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), | 
 | 			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE)); | 
 | 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE)); | 
 | 	omap_prm_base_init(); | 
 | 	omap_cm_base_init(); | 
 | 	omap4xxx_check_revision(); | 
 | 	omap4xxx_check_features(); | 
 | 	omap44xx_prm_init(); | 
 | 	omap44xx_voltagedomains_init(); | 
 | 	omap44xx_powerdomains_init(); | 
 | 	omap44xx_clockdomains_init(); | 
 | 	omap44xx_hwmod_init(); | 
 | 	omap_hwmod_init_postsetup(); | 
 | 	omap_clk_init = omap4xxx_clk_init; | 
 | } | 
 |  | 
 | void __init omap4430_init_late(void) | 
 | { | 
 | 	omap_common_late_init(); | 
 | 	omap4_pm_init(); | 
 | 	omap2_clk_enable_autoidle_all(); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_SOC_OMAP5 | 
 | void __init omap5_init_early(void) | 
 | { | 
 | 	omap2_set_globals_tap(OMAP54XX_CLASS, | 
 | 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE)); | 
 | 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), | 
 | 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE)); | 
 | 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE)); | 
 | 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), | 
 | 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); | 
 | 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); | 
 | 	omap_prm_base_init(); | 
 | 	omap_cm_base_init(); | 
 | 	omap5xxx_check_revision(); | 
 | } | 
 | #endif | 
 |  | 
 | void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, | 
 | 				      struct omap_sdrc_params *sdrc_cs1) | 
 | { | 
 | 	omap_sram_init(); | 
 |  | 
 | 	if (cpu_is_omap24xx() || omap3_has_sdrc()) { | 
 | 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1); | 
 | 		_omap2_init_reprogram_sdrc(); | 
 | 	} | 
 | } |