isdn: whitespace coding style cleanup
isdn source code uses a not-current coding style.
Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.
Done with emacs and some scripts and some typing.
Built x86 allyesconfig.
No detected change in objdump -d or size.
Signed-off-by: Joe Perches <joe@perches.com>
diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 69dfc8d..1ee531b 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -9,7 +9,7 @@
*
* Author Marcus Niemann
* Copyright by Marcus Niemann <niemann@www-bib.fh-bielefeld.de>
- *
+ *
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
@@ -30,13 +30,13 @@
* ISDN PC/104 IPAC DIP-SWITCH
* Speed Star2 IPAC CARDMGR
* Speed PCI IPAC PCI PNP
- * Speed Fax+ ISAC_ISAR PCI PNP Full analog support
+ * Speed Fax+ ISAC_ISAR PCI PNP Full analog support
*
* Important:
* For the sedlbauer speed fax+ to work properly you have to download
* the firmware onto the card.
* For example: hisaxctrl <DriverID> 9 ISAR.BIN
-*/
+ */
#include <linux/init.h>
#include "hisax.h"
@@ -51,9 +51,9 @@
static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
static const char *Sedlbauer_Types[] =
- {"None", "speed card/win", "speed star", "speed fax+",
- "speed win II / ISDN PC/104", "speed star II", "speed pci",
- "speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
+{"None", "speed card/win", "speed star", "speed fax+",
+ "speed win II / ISDN PC/104", "speed star II", "speed pci",
+ "speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
#define PCI_SUBVENDOR_SPEEDFAX_PYRAMID 0x51
#define PCI_SUBVENDOR_HST_SAPHIR3 0x52
@@ -62,11 +62,11 @@
#define PCI_SUB_ID_SEDLBAUER 0x01
#define SEDL_SPEED_CARD_WIN 1
-#define SEDL_SPEED_STAR 2
+#define SEDL_SPEED_STAR 2
#define SEDL_SPEED_FAX 3
-#define SEDL_SPEED_WIN2_PC104 4
-#define SEDL_SPEED_STAR2 5
-#define SEDL_SPEED_PCI 6
+#define SEDL_SPEED_WIN2_PC104 4
+#define SEDL_SPEED_STAR2 5
+#define SEDL_SPEED_PCI 6
#define SEDL_SPEEDFAX_PYRAMID 7
#define SEDL_SPEEDFAX_PCI 8
#define HST_SAPHIR3 9
@@ -80,7 +80,7 @@
#define SEDL_BUS_PCI 2
#define SEDL_BUS_PCMCIA 3
-#define byteout(addr,val) outb(val,addr)
+#define byteout(addr, val) outb(val, addr)
#define bytein(addr) inb(addr)
#define SEDL_HSCX_ISA_RESET_ON 0
@@ -127,7 +127,7 @@
}
static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
{
byteout(ale, off);
insb(adr, data, size);
@@ -142,7 +142,7 @@
}
static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
{
byteout(ale, off);
outsb(adr, data, size);
@@ -163,13 +163,13 @@
}
static void
-ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
{
readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
}
static void
-WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
{
writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
}
@@ -177,23 +177,23 @@
static u_char
ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
{
- return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80));
+ return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80));
}
static void
WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
{
- writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80, value);
+ writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80, value);
}
static void
-ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
{
readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
}
static void
-WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
{
writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
}
@@ -220,12 +220,12 @@
static u_char
ReadISAR(struct IsdnCardState *cs, int mode, u_char offset)
-{
+{
if (mode == 0)
return (readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset));
else if (mode == 1)
byteout(cs->hw.sedl.adr, offset);
- return(bytein(cs->hw.sedl.hscx));
+ return (bytein(cs->hw.sedl.hscx));
}
static void
@@ -244,16 +244,16 @@
* fast interrupt HSCX stuff goes here
*/
-#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr, \
- cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr, \
- cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
+#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr, \
+ cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr, \
+ cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr, \
- cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr, \
+ cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr, \
- cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr, \
+ cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
#include "hscx_irq.c"
@@ -274,11 +274,11 @@
}
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
- Start_HSCX:
+Start_HSCX:
if (val)
hscx_int_main(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
- Start_ISAC:
+Start_ISAC:
if (val)
isac_interrupt(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
@@ -360,11 +360,11 @@
spin_lock_irqsave(&cs->lock, flags);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
- Start_ISAR:
+Start_ISAR:
if (val & ISAR_IRQSTA)
isar_int_main(cs);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
- Start_ISAC:
+Start_ISAC:
if (val)
isac_interrupt(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
@@ -411,7 +411,7 @@
printk(KERN_INFO "Sedlbauer: resetting card\n");
if (!((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) &&
- (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
+ (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x20);
mdelay(2);
@@ -423,12 +423,12 @@
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xc0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_PCFG, 0x12);
} else if ((cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) &&
- (cs->hw.sedl.bus == SEDL_BUS_PCI)) {
- byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
+ (cs->hw.sedl.bus == SEDL_BUS_PCI)) {
+ byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
mdelay(2);
- byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
+ byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
mdelay(10);
- } else {
+ } else {
byteout(cs->hw.sedl.reset_on, SEDL_RESET); /* Reset On */
mdelay(2);
byteout(cs->hw.sedl.reset_off, 0); /* Reset Off */
@@ -443,86 +443,86 @@
u_long flags;
switch (mt) {
- case CARD_RESET:
+ case CARD_RESET:
+ spin_lock_irqsave(&cs->lock, flags);
+ reset_sedlbauer(cs);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return (0);
+ case CARD_RELEASE:
+ if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+ /* disable all IRQ */
+ byteout(cs->hw.sedl.cfg_reg + 5, 0);
+ if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
spin_lock_irqsave(&cs->lock, flags);
+ writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+ ISAR_IRQBIT, 0);
+ writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
+ ISAC_MASK, 0xFF);
reset_sedlbauer(cs);
+ writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+ ISAR_IRQBIT, 0);
+ writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
+ ISAC_MASK, 0xFF);
spin_unlock_irqrestore(&cs->lock, flags);
- return(0);
- case CARD_RELEASE:
- if (cs->hw.sedl.bus == SEDL_BUS_PCI)
- /* disable all IRQ */
- byteout(cs->hw.sedl.cfg_reg+ 5, 0);
- if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
- spin_lock_irqsave(&cs->lock, flags);
- writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
- ISAR_IRQBIT, 0);
- writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
- ISAC_MASK, 0xFF);
- reset_sedlbauer(cs);
- writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
- ISAR_IRQBIT, 0);
- writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
- ISAC_MASK, 0xFF);
- spin_unlock_irqrestore(&cs->lock, flags);
- }
- release_io_sedlbauer(cs);
- return(0);
- case CARD_INIT:
- spin_lock_irqsave(&cs->lock, flags);
- if (cs->hw.sedl.bus == SEDL_BUS_PCI)
- /* enable all IRQ */
- byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
- reset_sedlbauer(cs);
- if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
- clear_pending_isac_ints(cs);
- writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
- ISAR_IRQBIT, 0);
- initisac(cs);
- initisar(cs);
- /* Reenable all IRQ */
- cs->writeisac(cs, ISAC_MASK, 0);
- /* RESET Receiver and Transmitter */
- cs->writeisac(cs, ISAC_CMDR, 0x41);
- } else {
- inithscxisac(cs, 3);
- }
- spin_unlock_irqrestore(&cs->lock, flags);
- return(0);
- case CARD_TEST:
- return(0);
- case MDL_INFO_CONN:
- if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
- return(0);
- spin_lock_irqsave(&cs->lock, flags);
- if ((long) arg)
- cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
- else
- cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
- byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
- spin_unlock_irqrestore(&cs->lock, flags);
- break;
- case MDL_INFO_REL:
- if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
- return(0);
- spin_lock_irqsave(&cs->lock, flags);
- if ((long) arg)
- cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
- else
- cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
- byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
- spin_unlock_irqrestore(&cs->lock, flags);
- break;
+ }
+ release_io_sedlbauer(cs);
+ return (0);
+ case CARD_INIT:
+ spin_lock_irqsave(&cs->lock, flags);
+ if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+ /* enable all IRQ */
+ byteout(cs->hw.sedl.cfg_reg + 5, 0x02);
+ reset_sedlbauer(cs);
+ if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
+ clear_pending_isac_ints(cs);
+ writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+ ISAR_IRQBIT, 0);
+ initisac(cs);
+ initisar(cs);
+ /* Reenable all IRQ */
+ cs->writeisac(cs, ISAC_MASK, 0);
+ /* RESET Receiver and Transmitter */
+ cs->writeisac(cs, ISAC_CMDR, 0x41);
+ } else {
+ inithscxisac(cs, 3);
+ }
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return (0);
+ case CARD_TEST:
+ return (0);
+ case MDL_INFO_CONN:
+ if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
+ return (0);
+ spin_lock_irqsave(&cs->lock, flags);
+ if ((long) arg)
+ cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
+ else
+ cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
+ byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ break;
+ case MDL_INFO_REL:
+ if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
+ return (0);
+ spin_lock_irqsave(&cs->lock, flags);
+ if ((long) arg)
+ cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
+ else
+ cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
+ byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ break;
}
- return(0);
+ return (0);
}
#ifdef __ISAPNP__
static struct isapnp_device_id sedl_ids[] __devinitdata = {
{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
- ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
+ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
(unsigned long) "Speed win" },
{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
- ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
+ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
(unsigned long) "Speed Fax+" },
{ 0, }
};
@@ -539,31 +539,31 @@
if (!isapnp_present())
return -1;
- while(ipid->card_vendor) {
+ while (ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
- ipid->card_device, pnp_c))) {
+ ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
- ipid->vendor, ipid->function, pnp_d))) {
+ ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
- (char *)ipid->driver_data);
+ (char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
- if (err<0) {
+ if (err < 0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
- __func__, err);
- return(0);
+ __func__, err);
+ return (0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
- card->para[0], card->para[1]);
+ card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
- return(0);
+ return (0);
}
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
@@ -579,12 +579,12 @@
return (1);
} else {
printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
- return(0);
+ return (0);
}
}
ipid++;
pnp_c = NULL;
- }
+ }
printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
return -1;
@@ -608,30 +608,30 @@
u16 sub_vendor_id, sub_id;
if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
- PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
+ PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
if (pci_enable_device(dev_sedl))
- return(0);
+ return (0);
cs->irq = dev_sedl->irq;
if (!cs->irq) {
printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
- return(0);
+ return (0);
}
cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
} else {
printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
- return(0);
+ return (0);
}
cs->irq_flags |= IRQF_SHARED;
cs->hw.sedl.bus = SEDL_BUS_PCI;
sub_vendor_id = dev_sedl->subsystem_vendor;
sub_id = dev_sedl->subsystem_device;
printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
- sub_vendor_id, sub_id);
+ sub_vendor_id, sub_id);
printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
- cs->hw.sedl.cfg_reg);
+ cs->hw.sedl.cfg_reg);
if (sub_id != PCI_SUB_ID_SEDLBAUER) {
printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
- return(0);
+ return (0);
}
if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
@@ -647,19 +647,19 @@
cs->subtyp = SEDL_SPEED_PCI;
} else {
printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
- sub_vendor_id);
- return(0);
+ sub_vendor_id);
+ return (0);
}
cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
byteout(cs->hw.sedl.cfg_reg, 0xff);
byteout(cs->hw.sedl.cfg_reg, 0x00);
- byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
- byteout(cs->hw.sedl.cfg_reg+ 5, 0); /* disable all IRQ */
- byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
+ byteout(cs->hw.sedl.cfg_reg + 2, 0xdd);
+ byteout(cs->hw.sedl.cfg_reg + 5, 0); /* disable all IRQ */
+ byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
mdelay(2);
- byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
+ byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
mdelay(10);
return (1);
@@ -684,20 +684,20 @@
strcpy(tmp, Sedlbauer_revision);
printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
-
- if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
- cs->subtyp = SEDL_SPEED_CARD_WIN;
+
+ if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
+ cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
- } else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
- cs->subtyp = SEDL_SPEED_STAR;
+ } else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
+ cs->subtyp = SEDL_SPEED_STAR;
cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
- } else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
- cs->subtyp = SEDL_SPEED_FAX;
+ } else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
+ cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
- } else
+ } else
return (0);
bytecnt = 8;
@@ -720,22 +720,22 @@
return (0);
bytecnt = 256;
- }
+ }
-ready:
+ready:
/* In case of the sedlbauer pcmcia card, this region is in use,
* reserved for us by the card manager. So we do not check it
* here, it would fail.
*/
if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
- !request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
+ !request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
- cs->hw.sedl.cfg_reg,
- cs->hw.sedl.cfg_reg + bytecnt);
- return (0);
+ "HiSax: %s config port %x-%x already in use\n",
+ CardType[card->typ],
+ cs->hw.sedl.cfg_reg,
+ cs->hw.sedl.cfg_reg + bytecnt);
+ return (0);
}
printk(KERN_INFO
@@ -753,12 +753,12 @@
* testing ISA and PCMCIA Cards for IPAC, default is ISAC
* do not test for PCI card, because ports are different
* and PCI card uses only IPAC (for the moment)
- */
+ */
if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
- cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
+ cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
- if ((val == 1) || (val == 2)) {
+ if ((val == 1) || (val == 2)) {
/* IPAC */
cs->subtyp = SEDL_SPEED_WIN2_PC104;
if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
@@ -777,16 +777,16 @@
* hw.sedl.chip is now properly set
*/
printk(KERN_INFO "Sedlbauer: %s detected\n",
- Sedlbauer_Types[cs->subtyp]);
+ Sedlbauer_Types[cs->subtyp]);
setup_isac(cs);
if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
- cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
+ cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
} else {
- cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
+ cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
}
@@ -807,22 +807,22 @@
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_PCI_ADR;
+ SEDL_ISAR_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_PCI_ISAC;
+ SEDL_ISAR_PCI_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_PCI_ISAR;
+ SEDL_ISAR_PCI_ISAR;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_ISA_ADR;
+ SEDL_ISAR_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_ISA_ISAC;
+ SEDL_ISAR_ISA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_ISA_ISAR;
+ SEDL_ISAR_ISA_ISAR;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_ISA_ISAR_RESET_ON;
+ SEDL_ISAR_ISA_ISAR_RESET_ON;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
- SEDL_ISAR_ISA_ISAR_RESET_OFF;
+ SEDL_ISAR_ISA_ISAR_RESET_OFF;
}
cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
@@ -838,7 +838,7 @@
ver = ISARVersion(cs, "Sedlbauer:");
if (ver < 0)
printk(KERN_WARNING
- "Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
+ "Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
else
break;
reset_sedlbauer(cs);
@@ -865,10 +865,10 @@
}
cs->irq_func = &sedlbauer_interrupt;
ISACVersion(cs, "Sedlbauer:");
-
+
if (HscxVersion(cs, "Sedlbauer:")) {
printk(KERN_WARNING
- "Sedlbauer: wrong HSCX versions check IO address\n");
+ "Sedlbauer: wrong HSCX versions check IO address\n");
release_io_sedlbauer(cs);
return (0);
}