| /* | 
 |  * | 
 |  * i2c tv tuner chip device driver | 
 |  * controls all those simple 4-control-bytes style tuners. | 
 |  */ | 
 | #include <linux/delay.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/videodev.h> | 
 | #include <media/tuner.h> | 
 |  | 
 | static int offset = 0; | 
 | module_param(offset, int, 0666); | 
 | MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner"); | 
 |  | 
 | /* ---------------------------------------------------------------------- */ | 
 |  | 
 | /* tv standard selection for Temic 4046 FM5 | 
 |    this value takes the low bits of control byte 2 | 
 |    from datasheet Rev.01, Feb.00 | 
 |      standard     BG      I       L       L2      D | 
 |      picture IF   38.9    38.9    38.9    33.95   38.9 | 
 |      sound 1      33.4    32.9    32.4    40.45   32.4 | 
 |      sound 2      33.16 | 
 |      NICAM        33.05   32.348  33.05           33.05 | 
 |  */ | 
 | #define TEMIC_SET_PAL_I         0x05 | 
 | #define TEMIC_SET_PAL_DK        0x09 | 
 | #define TEMIC_SET_PAL_L         0x0a // SECAM ? | 
 | #define TEMIC_SET_PAL_L2        0x0b // change IF ! | 
 | #define TEMIC_SET_PAL_BG        0x0c | 
 |  | 
 | /* tv tuner system standard selection for Philips FQ1216ME | 
 |    this value takes the low bits of control byte 2 | 
 |    from datasheet "1999 Nov 16" (supersedes "1999 Mar 23") | 
 |      standard 		BG	DK	I	L	L` | 
 |      picture carrier	38.90	38.90	38.90	38.90	33.95 | 
 |      colour		34.47	34.47	34.47	34.47	38.38 | 
 |      sound 1		33.40	32.40	32.90	32.40	40.45 | 
 |      sound 2		33.16	-	-	-	- | 
 |      NICAM		33.05	33.05	32.35	33.05	39.80 | 
 |  */ | 
 | #define PHILIPS_SET_PAL_I	0x01 /* Bit 2 always zero !*/ | 
 | #define PHILIPS_SET_PAL_BGDK	0x09 | 
 | #define PHILIPS_SET_PAL_L2	0x0a | 
 | #define PHILIPS_SET_PAL_L	0x0b | 
 |  | 
 | /* system switching for Philips FI1216MF MK2 | 
 |    from datasheet "1996 Jul 09", | 
 |     standard         BG     L      L' | 
 |     picture carrier  38.90  38.90  33.95 | 
 |     colour	     34.47  34.37  38.38 | 
 |     sound 1          33.40  32.40  40.45 | 
 |     sound 2          33.16  -      - | 
 |     NICAM            33.05  33.05  39.80 | 
 |  */ | 
 | #define PHILIPS_MF_SET_BG	0x01 /* Bit 2 must be zero, Bit 3 is system output */ | 
 | #define PHILIPS_MF_SET_PAL_L	0x03 // France | 
 | #define PHILIPS_MF_SET_PAL_L2	0x02 // L' | 
 |  | 
 | /* Control byte */ | 
 |  | 
 | #define TUNER_RATIO_MASK        0x06 /* Bit cb1:cb2 */ | 
 | #define TUNER_RATIO_SELECT_50   0x00 | 
 | #define TUNER_RATIO_SELECT_32   0x02 | 
 | #define TUNER_RATIO_SELECT_166  0x04 | 
 | #define TUNER_RATIO_SELECT_62   0x06 | 
 |  | 
 | #define TUNER_CHARGE_PUMP       0x40  /* Bit cb6 */ | 
 |  | 
 | /* Status byte */ | 
 |  | 
 | #define TUNER_POR	  0x80 | 
 | #define TUNER_FL          0x40 | 
 | #define TUNER_MODE        0x38 | 
 | #define TUNER_AFC         0x07 | 
 | #define TUNER_SIGNAL      0x07 | 
 | #define TUNER_STEREO      0x10 | 
 |  | 
 | #define TUNER_PLL_LOCKED   0x40 | 
 | #define TUNER_STEREO_MK3   0x04 | 
 |  | 
 | /* ---------------------------------------------------------------------- */ | 
 |  | 
 | static int tuner_getstatus(struct i2c_client *c) | 
 | { | 
 | 	unsigned char byte; | 
 |  | 
 | 	if (1 != i2c_master_recv(c,&byte,1)) | 
 | 		return 0; | 
 |  | 
 | 	return byte; | 
 | } | 
 |  | 
 | static int tuner_signal(struct i2c_client *c) | 
 | { | 
 | 	return (tuner_getstatus(c) & TUNER_SIGNAL) << 13; | 
 | } | 
 |  | 
 | static int tuner_stereo(struct i2c_client *c) | 
 | { | 
 | 	int stereo, status; | 
 | 	struct tuner *t = i2c_get_clientdata(c); | 
 |  | 
 | 	status = tuner_getstatus (c); | 
 |  | 
 | 	switch (t->type) { | 
 | 		case TUNER_PHILIPS_FM1216ME_MK3: | 
 |     		case TUNER_PHILIPS_FM1236_MK3: | 
 | 		case TUNER_PHILIPS_FM1256_IH3: | 
 | 			stereo = ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); | 
 | 			break; | 
 | 		default: | 
 | 			stereo = status & TUNER_STEREO; | 
 | 	} | 
 |  | 
 | 	return stereo; | 
 | } | 
 |  | 
 |  | 
 | /* ---------------------------------------------------------------------- */ | 
 |  | 
 | static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) | 
 | { | 
 | 	struct tuner *t = i2c_get_clientdata(c); | 
 | 	u8 config, cb, tuneraddr; | 
 | 	u16 div; | 
 | 	struct tunertype *tun; | 
 | 	u8 buffer[4]; | 
 | 	int rc, IFPCoff, i, j; | 
 | 	enum param_type desired_type; | 
 |  | 
 | 	tun = &tuners[t->type]; | 
 |  | 
 | 	/* IFPCoff = Video Intermediate Frequency - Vif: | 
 | 		940  =16*58.75  NTSC/J (Japan) | 
 | 		732  =16*45.75  M/N STD | 
 | 		704  =16*44     ATSC (at DVB code) | 
 | 		632  =16*39.50  I U.K. | 
 | 		622.4=16*38.90  B/G D/K I, L STD | 
 | 		592  =16*37.00  D China | 
 | 		590  =16.36.875 B Australia | 
 | 		543.2=16*33.95  L' STD | 
 | 		171.2=16*10.70  FM Radio (at set_radio_freq) | 
 | 	*/ | 
 |  | 
 | 	if (t->std == V4L2_STD_NTSC_M_JP) { | 
 | 		IFPCoff      = 940; | 
 | 		desired_type = TUNER_PARAM_TYPE_NTSC; | 
 | 	} else if ((t->std & V4L2_STD_MN) && | 
 | 		  !(t->std & ~V4L2_STD_MN)) { | 
 | 		IFPCoff      = 732; | 
 | 		desired_type = TUNER_PARAM_TYPE_NTSC; | 
 | 	} else if (t->std == V4L2_STD_SECAM_LC) { | 
 | 		IFPCoff      = 543; | 
 | 		desired_type = TUNER_PARAM_TYPE_SECAM; | 
 | 	} else { | 
 | 		IFPCoff      = 623; | 
 | 		desired_type = TUNER_PARAM_TYPE_PAL; | 
 | 	} | 
 |  | 
 | 	for (j = 0; j < tun->count-1; j++) { | 
 | 		if (desired_type != tun->params[j].type) | 
 | 			continue; | 
 | 		break; | 
 | 	} | 
 | 	/* use default tuner_params if desired_type not available */ | 
 | 	if (desired_type != tun->params[j].type) { | 
 | 		tuner_dbg("IFPCoff = %d: tuner_params undefined for tuner %d\n", | 
 | 			  IFPCoff,t->type); | 
 | 		j = 0; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < tun->params[j].count; i++) { | 
 | 		if (freq > tun->params[j].ranges[i].limit) | 
 | 			continue; | 
 | 		break; | 
 | 	} | 
 | 	if (i == tun->params[j].count) { | 
 | 		tuner_dbg("TV frequency out of range (%d > %d)", | 
 | 				freq, tun->params[j].ranges[i - 1].limit); | 
 | 		freq = tun->params[j].ranges[--i].limit; | 
 | 	} | 
 | 	config = tun->params[j].ranges[i].config; | 
 | 	cb     = tun->params[j].ranges[i].cb; | 
 | 	/*  i == 0 -> VHF_LO | 
 | 	 *  i == 1 -> VHF_HI | 
 | 	 *  i == 2 -> UHF     */ | 
 | 	tuner_dbg("tv: param %d, range %d\n",j,i); | 
 |  | 
 | 	div=freq + IFPCoff + offset; | 
 |  | 
 | 	tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n", | 
 | 					freq / 16, freq % 16 * 100 / 16, | 
 | 					IFPCoff / 16, IFPCoff % 16 * 100 / 16, | 
 | 					offset / 16, offset % 16 * 100 / 16, | 
 | 					div); | 
 |  | 
 | 	/* tv norm specific stuff for multi-norm tuners */ | 
 | 	switch (t->type) { | 
 | 	case TUNER_PHILIPS_SECAM: // FI1216MF | 
 | 		/* 0x01 -> ??? no change ??? */ | 
 | 		/* 0x02 -> PAL BDGHI / SECAM L */ | 
 | 		/* 0x04 -> ??? PAL others / SECAM others ??? */ | 
 | 		cb &= ~0x02; | 
 | 		if (t->std & V4L2_STD_SECAM) | 
 | 			cb |= 0x02; | 
 | 		break; | 
 |  | 
 | 	case TUNER_TEMIC_4046FM5: | 
 | 		cb &= ~0x0f; | 
 |  | 
 | 		if (t->std & V4L2_STD_PAL_BG) { | 
 | 			cb |= TEMIC_SET_PAL_BG; | 
 |  | 
 | 		} else if (t->std & V4L2_STD_PAL_I) { | 
 | 			cb |= TEMIC_SET_PAL_I; | 
 |  | 
 | 		} else if (t->std & V4L2_STD_PAL_DK) { | 
 | 			cb |= TEMIC_SET_PAL_DK; | 
 |  | 
 | 		} else if (t->std & V4L2_STD_SECAM_L) { | 
 | 			cb |= TEMIC_SET_PAL_L; | 
 |  | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case TUNER_PHILIPS_FQ1216ME: | 
 | 		cb &= ~0x0f; | 
 |  | 
 | 		if (t->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { | 
 | 			cb |= PHILIPS_SET_PAL_BGDK; | 
 |  | 
 | 		} else if (t->std & V4L2_STD_PAL_I) { | 
 | 			cb |= PHILIPS_SET_PAL_I; | 
 |  | 
 | 		} else if (t->std & V4L2_STD_SECAM_L) { | 
 | 			cb |= PHILIPS_SET_PAL_L; | 
 |  | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case TUNER_PHILIPS_ATSC: | 
 | 		/* 0x00 -> ATSC antenna input 1 */ | 
 | 		/* 0x01 -> ATSC antenna input 2 */ | 
 | 		/* 0x02 -> NTSC antenna input 1 */ | 
 | 		/* 0x03 -> NTSC antenna input 2 */ | 
 | 		cb &= ~0x03; | 
 | 		if (!(t->std & V4L2_STD_ATSC)) | 
 | 			cb |= 2; | 
 | 		/* FIXME: input */ | 
 | 		break; | 
 |  | 
 | 	case TUNER_MICROTUNE_4042FI5: | 
 | 		/* Set the charge pump for fast tuning */ | 
 | 		config |= TUNER_CHARGE_PUMP; | 
 | 		break; | 
 |  | 
 | 	case TUNER_PHILIPS_TUV1236D: | 
 | 		/* 0x40 -> ATSC antenna input 1 */ | 
 | 		/* 0x48 -> ATSC antenna input 2 */ | 
 | 		/* 0x00 -> NTSC antenna input 1 */ | 
 | 		/* 0x08 -> NTSC antenna input 2 */ | 
 | 		buffer[0] = 0x14; | 
 | 		buffer[1] = 0x00; | 
 | 		buffer[2] = 0x17; | 
 | 		buffer[3] = 0x00; | 
 | 		cb &= ~0x40; | 
 | 		if (t->std & V4L2_STD_ATSC) { | 
 | 			cb |= 0x40; | 
 | 			buffer[1] = 0x04; | 
 | 		} | 
 | 		/* set to the correct mode (analog or digital) */ | 
 | 		tuneraddr = c->addr; | 
 | 		c->addr = 0x0a; | 
 | 		if (2 != (rc = i2c_master_send(c,&buffer[0],2))) | 
 | 			tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); | 
 | 		if (2 != (rc = i2c_master_send(c,&buffer[2],2))) | 
 | 			tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); | 
 | 		c->addr = tuneraddr; | 
 | 		/* FIXME: input */ | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (tuners[t->type].params->cb_first_if_lower_freq && div < t->last_div) { | 
 | 		buffer[0] = config; | 
 | 		buffer[1] = cb; | 
 | 		buffer[2] = (div>>8) & 0x7f; | 
 | 		buffer[3] = div      & 0xff; | 
 | 	} else { | 
 | 		buffer[0] = (div>>8) & 0x7f; | 
 | 		buffer[1] = div      & 0xff; | 
 | 		buffer[2] = config; | 
 | 		buffer[3] = cb; | 
 | 	} | 
 | 	t->last_div = div; | 
 | 	tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", | 
 | 		  buffer[0],buffer[1],buffer[2],buffer[3]); | 
 |  | 
 | 	if (4 != (rc = i2c_master_send(c,buffer,4))) | 
 | 		tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); | 
 |  | 
 | 	if (t->type == TUNER_MICROTUNE_4042FI5) { | 
 | 		// FIXME - this may also work for other tuners | 
 | 		unsigned long timeout = jiffies + msecs_to_jiffies(1); | 
 | 		u8 status_byte = 0; | 
 |  | 
 | 		/* Wait until the PLL locks */ | 
 | 		for (;;) { | 
 | 			if (time_after(jiffies,timeout)) | 
 | 				return; | 
 | 			if (1 != (rc = i2c_master_recv(c,&status_byte,1))) { | 
 | 				tuner_warn("i2c i/o read error: rc == %d (should be 1)\n",rc); | 
 | 				break; | 
 | 			} | 
 | 			if (status_byte & TUNER_PLL_LOCKED) | 
 | 				break; | 
 | 			udelay(10); | 
 | 		} | 
 |  | 
 | 		/* Set the charge pump for optimized phase noise figure */ | 
 | 		config &= ~TUNER_CHARGE_PUMP; | 
 | 		buffer[0] = (div>>8) & 0x7f; | 
 | 		buffer[1] = div      & 0xff; | 
 | 		buffer[2] = config; | 
 | 		buffer[3] = cb; | 
 | 		tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", | 
 | 		       buffer[0],buffer[1],buffer[2],buffer[3]); | 
 |  | 
 | 		if (4 != (rc = i2c_master_send(c,buffer,4))) | 
 | 			tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); | 
 | 	} | 
 | } | 
 |  | 
 | static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) | 
 | { | 
 | 	struct tunertype *tun; | 
 | 	struct tuner *t = i2c_get_clientdata(c); | 
 | 	u8 buffer[4]; | 
 | 	u16 div; | 
 | 	int rc, j; | 
 | 	enum param_type desired_type = TUNER_PARAM_TYPE_RADIO; | 
 |  | 
 | 	tun = &tuners[t->type]; | 
 |  | 
 | 	for (j = 0; j < tun->count-1; j++) { | 
 | 		if (desired_type != tun->params[j].type) | 
 | 			continue; | 
 | 		break; | 
 | 	} | 
 | 	/* use default tuner_params if desired_type not available */ | 
 | 	if (desired_type != tun->params[j].type) | 
 | 		j = 0; | 
 |  | 
 | 	div = (20 * freq / 16000) + (int)(20*10.7); /* IF 10.7 MHz */ | 
 | 	buffer[2] = (tun->params[j].ranges[0].config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */ | 
 |  | 
 | 	switch (t->type) { | 
 | 	case TUNER_TENA_9533_DI: | 
 | 	case TUNER_YMEC_TVF_5533MF: | 
 | 		tuner_dbg ("This tuner doesn't have FM. Most cards has a TEA5767 for FM\n"); | 
 | 		return; | 
 | 	case TUNER_PHILIPS_FM1216ME_MK3: | 
 | 	case TUNER_PHILIPS_FM1236_MK3: | 
 | 	case TUNER_PHILIPS_FMD1216ME_MK3: | 
 | 		buffer[3] = 0x19; | 
 | 		break; | 
 | 	case TUNER_TNF_5335MF: | 
 | 		buffer[3] = 0x11; | 
 | 		break; | 
 | 	case TUNER_PHILIPS_FM1256_IH3: | 
 | 		div = (20 * freq) / 16000 + (int)(33.3 * 20);  /* IF 33.3 MHz */ | 
 | 		buffer[3] = 0x19; | 
 | 		break; | 
 | 	case TUNER_LG_PAL_FM: | 
 | 		buffer[3] = 0xa5; | 
 | 		break; | 
 | 	case TUNER_MICROTUNE_4049FM5: | 
 | 		div = (20 * freq) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */ | 
 | 		buffer[3] = 0xa4; | 
 | 		break; | 
 | 	default: | 
 | 		buffer[3] = 0xa4; | 
 | 		break; | 
 | 	} | 
 | 	buffer[0] = (div>>8) & 0x7f; | 
 | 	buffer[1] = div      & 0xff; | 
 | 	if (tuners[t->type].params->cb_first_if_lower_freq && div < t->last_div) { | 
 | 		buffer[0] = buffer[2]; | 
 | 		buffer[1] = buffer[3]; | 
 | 		buffer[2] = (div>>8) & 0x7f; | 
 | 		buffer[3] = div      & 0xff; | 
 | 	} else { | 
 | 		buffer[0] = (div>>8) & 0x7f; | 
 | 		buffer[1] = div      & 0xff; | 
 | 	} | 
 |  | 
 | 	tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n", | 
 | 	       buffer[0],buffer[1],buffer[2],buffer[3]); | 
 | 	t->last_div = div; | 
 |  | 
 | 	if (4 != (rc = i2c_master_send(c,buffer,4))) | 
 | 		tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); | 
 | } | 
 |  | 
 | int default_tuner_init(struct i2c_client *c) | 
 | { | 
 | 	struct tuner *t = i2c_get_clientdata(c); | 
 |  | 
 | 	tuner_info("type set to %d (%s)\n", | 
 | 		   t->type, tuners[t->type].name); | 
 | 	strlcpy(c->name, tuners[t->type].name, sizeof(c->name)); | 
 |  | 
 | 	t->set_tv_freq = default_set_tv_freq; | 
 | 	t->set_radio_freq = default_set_radio_freq; | 
 | 	t->has_signal = tuner_signal; | 
 | 	t->is_stereo = tuner_stereo; | 
 | 	t->standby = NULL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Overrides for Emacs so that we follow Linus's tabbing style. | 
 |  * --------------------------------------------------------------------------- | 
 |  * Local variables: | 
 |  * c-basic-offset: 8 | 
 |  * End: | 
 |  */ |