iwlagn: SCD configuration for AMPDU moves to transport layer
All the configurations of the HW for AMPDU are now in the transport layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
index f3b531b..9cecb10 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
@@ -35,9 +35,56 @@
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
+#include "iwl-sta.h"
#include "iwl-helpers.h"
#include "iwl-trans-int-pcie.h"
+/* TODO:this file should _not_ include the external API header file
+ * (iwl-trans.h). This is needed as a W/A until reclaim functions will move to
+ * the transport layer */
+#include "iwl-trans.h"
+
+/**
+ * iwl_trans_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
+ */
+void iwl_trans_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq,
+ u16 byte_cnt)
+{
+ struct iwlagn_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
+ int write_ptr = txq->q.write_ptr;
+ int txq_id = txq->q.id;
+ u8 sec_ctl = 0;
+ u8 sta_id = 0;
+ u16 len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
+ __le16 bc_ent;
+
+ WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
+
+ sta_id = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
+ sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
+
+ switch (sec_ctl & TX_CMD_SEC_MSK) {
+ case TX_CMD_SEC_CCM:
+ len += CCMP_MIC_LEN;
+ break;
+ case TX_CMD_SEC_TKIP:
+ len += TKIP_ICV_LEN;
+ break;
+ case TX_CMD_SEC_WEP:
+ len += WEP_IV_LEN + WEP_ICV_LEN;
+ break;
+ }
+
+ bc_ent = cpu_to_le16((len & 0xFFF) | (sta_id << 12));
+
+ scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
+
+ if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
+ scd_bc_tbl[txq_id].
+ tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
+}
+
/**
* iwl_txq_update_write_ptr - Send new write index to hardware
*/
@@ -291,6 +338,183 @@
return 0;
}
+/*TODO: this functions should NOT be exported from trans module - export it
+ * until the reclaim flow will be brought to the transport module too */
+void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq)
+{
+ struct iwlagn_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
+ int txq_id = txq->q.id;
+ int read_ptr = txq->q.read_ptr;
+ u8 sta_id = 0;
+ __le16 bc_ent;
+
+ WARN_ON(read_ptr >= TFD_QUEUE_SIZE_MAX);
+
+ if (txq_id != priv->cmd_queue)
+ sta_id = txq->cmd[read_ptr]->cmd.tx.sta_id;
+
+ bc_ent = cpu_to_le16(1 | (sta_id << 12));
+ scd_bc_tbl[txq_id].tfd_offset[read_ptr] = bc_ent;
+
+ if (read_ptr < TFD_QUEUE_SIZE_BC_DUP)
+ scd_bc_tbl[txq_id].
+ tfd_offset[TFD_QUEUE_SIZE_MAX + read_ptr] = bc_ent;
+}
+
+static int iwlagn_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
+ u16 txq_id)
+{
+ u32 tbl_dw_addr;
+ u32 tbl_dw;
+ u16 scd_q2ratid;
+
+ scd_q2ratid = ra_tid & SCD_QUEUE_RA_TID_MAP_RATID_MSK;
+
+ tbl_dw_addr = priv->scd_base_addr +
+ SCD_TRANS_TBL_OFFSET_QUEUE(txq_id);
+
+ tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
+
+ if (txq_id & 0x1)
+ tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
+ else
+ tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
+
+ iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
+
+ return 0;
+}
+
+static void iwlagn_tx_queue_stop_scheduler(struct iwl_priv *priv, u16 txq_id)
+{
+ /* Simply stop the queue, but don't change any configuration;
+ * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
+ iwl_write_prph(priv,
+ SCD_QUEUE_STATUS_BITS(txq_id),
+ (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)|
+ (1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
+}
+
+void iwl_trans_set_wr_ptrs(struct iwl_priv *priv,
+ int txq_id, u32 index)
+{
+ iwl_write_direct32(priv, HBUS_TARG_WRPTR,
+ (index & 0xff) | (txq_id << 8));
+ iwl_write_prph(priv, SCD_QUEUE_RDPTR(txq_id), index);
+}
+
+void iwl_trans_tx_queue_set_status(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq,
+ int tx_fifo_id, int scd_retry)
+{
+ int txq_id = txq->q.id;
+ int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
+
+ iwl_write_prph(priv, SCD_QUEUE_STATUS_BITS(txq_id),
+ (active << SCD_QUEUE_STTS_REG_POS_ACTIVE) |
+ (tx_fifo_id << SCD_QUEUE_STTS_REG_POS_TXF) |
+ (1 << SCD_QUEUE_STTS_REG_POS_WSL) |
+ SCD_QUEUE_STTS_REG_MSK);
+
+ txq->sched_retry = scd_retry;
+
+ IWL_DEBUG_INFO(priv, "%s %s Queue %d on FIFO %d\n",
+ active ? "Activate" : "Deactivate",
+ scd_retry ? "BA" : "AC/CMD", txq_id, tx_fifo_id);
+}
+
+void iwl_trans_txq_agg_setup(struct iwl_priv *priv, int sta_id, int tid,
+ int frame_limit)
+{
+ int tx_fifo, txq_id, ssn_idx;
+ u16 ra_tid;
+ unsigned long flags;
+ struct iwl_tid_data *tid_data;
+
+ if (WARN_ON(sta_id == IWL_INVALID_STATION))
+ return;
+ if (WARN_ON(tid >= MAX_TID_COUNT))
+ return;
+
+ spin_lock_irqsave(&priv->sta_lock, flags);
+ tid_data = &priv->stations[sta_id].tid[tid];
+ ssn_idx = SEQ_TO_SN(tid_data->seq_number);
+ txq_id = tid_data->agg.txq_id;
+ tx_fifo = tid_data->agg.tx_fifo;
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+ ra_tid = BUILD_RAxTID(sta_id, tid);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Stop this Tx queue before configuring it */
+ iwlagn_tx_queue_stop_scheduler(priv, txq_id);
+
+ /* Map receiver-address / traffic-ID to this queue */
+ iwlagn_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
+
+ /* Set this queue as a chain-building queue */
+ iwl_set_bits_prph(priv, SCD_QUEUECHAIN_SEL, (1<<txq_id));
+
+ /* enable aggregations for the queue */
+ iwl_set_bits_prph(priv, SCD_AGGR_SEL, (1<<txq_id));
+
+ /* Place first TFD at index corresponding to start sequence number.
+ * Assumes that ssn_idx is valid (!= 0xFFF) */
+ priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
+ priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
+ iwl_trans_set_wr_ptrs(priv, txq_id, ssn_idx);
+
+ /* Set up Tx window size and frame limit for this queue */
+ iwl_write_targ_mem(priv, priv->scd_base_addr +
+ SCD_CONTEXT_QUEUE_OFFSET(txq_id) +
+ sizeof(u32),
+ ((frame_limit <<
+ SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
+ SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
+ ((frame_limit <<
+ SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
+ SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
+
+ iwl_set_bits_prph(priv, SCD_INTERRUPT_MASK, (1 << txq_id));
+
+ /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
+ iwl_trans_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+int iwl_trans_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
+ u16 ssn_idx, u8 tx_fifo)
+{
+ if ((IWLAGN_FIRST_AMPDU_QUEUE > txq_id) ||
+ (IWLAGN_FIRST_AMPDU_QUEUE +
+ priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
+ IWL_ERR(priv,
+ "queue number out of range: %d, must be %d to %d\n",
+ txq_id, IWLAGN_FIRST_AMPDU_QUEUE,
+ IWLAGN_FIRST_AMPDU_QUEUE +
+ priv->cfg->base_params->num_of_ampdu_queues - 1);
+ return -EINVAL;
+ }
+
+ iwlagn_tx_queue_stop_scheduler(priv, txq_id);
+
+ iwl_clear_bits_prph(priv, SCD_AGGR_SEL, (1 << txq_id));
+
+ priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
+ priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
+ /* supposes that ssn_idx is valid (!= 0xFFF) */
+ iwl_trans_set_wr_ptrs(priv, txq_id, ssn_idx);
+
+ iwl_clear_bits_prph(priv, SCD_INTERRUPT_MASK, (1 << txq_id));
+ iwl_txq_ctx_deactivate(priv, txq_id);
+ iwl_trans_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
+
+ return 0;
+}
+
/*************** HOST COMMAND QUEUE FUNCTIONS *****/
/**