[MIPS] Fix "no space between function name and open parenthesis" warnings.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
index 45224fd..506e883 100644
--- a/arch/mips/pci/fixup-atlas.c
+++ b/arch/mips/pci/fixup-atlas.c
@@ -77,12 +77,12 @@
* code, but it is better than nothing...
*/
-static void atlas_saa9730_base_fixup (struct pci_dev *pdev)
+static void atlas_saa9730_base_fixup(struct pci_dev *pdev)
{
extern void *saa9730_base;
if (pdev->bus == 0 && PCI_SLOT(pdev->devfn) == 19)
- (void) pci_read_config_dword (pdev, 0x14, (u32 *)&saa9730_base);
- printk ("saa9730_base = %x\n", saa9730_base);
+ (void) pci_read_config_dword(pdev, 0x14, (u32 *)&saa9730_base);
+ printk("saa9730_base = %x\n", saa9730_base);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 7932dfe..6b29904 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -112,7 +112,7 @@
first_cfg = 0;
pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
if (!pci_cfg_vm)
- panic (KERN_ERR "PCI unable to get vm area\n");
+ panic(KERN_ERR "PCI unable to get vm area\n");
pci_cfg_wired_entry = read_c0_wired();
add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
last_entryLo0 = last_entryLo1 = 0xffffffff;
diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c
index fa2d2c6..97ed25b 100644
--- a/arch/mips/pci/ops-sni.c
+++ b/arch/mips/pci/ops-sni.c
@@ -70,13 +70,13 @@
switch (size) {
case 1:
- outb (val, PCIMT_CONFIG_DATA + (reg & 3));
+ outb(val, PCIMT_CONFIG_DATA + (reg & 3));
break;
case 2:
- outw (val, PCIMT_CONFIG_DATA + (reg & 2));
+ outw(val, PCIMT_CONFIG_DATA + (reg & 2));
break;
case 4:
- outl (val, PCIMT_CONFIG_DATA);
+ outl(val, PCIMT_CONFIG_DATA);
break;
}
@@ -93,7 +93,7 @@
if ((devfn > 255) || (reg > 255) || (busno > 255))
return PCIBIOS_BAD_REGISTER_NUMBER;
- outl ((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
+ outl((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
return PCIBIOS_SUCCESSFUL;
}
@@ -108,12 +108,12 @@
* we don't do it, we will get a data bus error
*/
if (bus->number == 0) {
- pcit_set_config_address (0, 0, 0x68);
- outl (inl (0xcfc) | 0xc0000000, 0xcfc);
+ pcit_set_config_address(0, 0, 0x68);
+ outl(inl(0xcfc) | 0xc0000000, 0xcfc);
if ((res = pcit_set_config_address(0, devfn, 0)))
return res;
- outl (0xffffffff, 0xcfc);
- pcit_set_config_address (0, 0, 0x68);
+ outl(0xffffffff, 0xcfc);
+ pcit_set_config_address(0, 0, 0x68);
if (inl(0xcfc) & 0x100000)
return PCIBIOS_DEVICE_NOT_FOUND;
}
@@ -144,13 +144,13 @@
switch (size) {
case 1:
- outb (val, PCIMT_CONFIG_DATA + (reg & 3));
+ outb(val, PCIMT_CONFIG_DATA + (reg & 3));
break;
case 2:
- outw (val, PCIMT_CONFIG_DATA + (reg & 2));
+ outw(val, PCIMT_CONFIG_DATA + (reg & 2));
break;
case 4:
- outl (val, PCIMT_CONFIG_DATA);
+ outl(val, PCIMT_CONFIG_DATA);
break;
}