ARM: SPEAr: Add plgpio node in device tree dtsi files
This patch adds plgpio nodes in SPEAr DT files.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index d71fe2a..6c09eb0 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -24,6 +24,12 @@
status = "disabled";
};
+ pinmux: pinmux@e0700000 {
+ compatible = "st,spear1340-pinmux";
+ reg = <0xe0700000 0x1000>;
+ #gpio-range-cells = <2>;
+ };
+
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
@@ -51,6 +57,26 @@
thermal@e07008c4 {
st,thermal-flags = <0x2a00>;
};
+
+ gpiopinctrl: gpio@e2800000 {
+ compatible = "st,spear-plgpio";
+ reg = <0xe2800000 0x1000>;
+ interrupts = <0 107 0x4>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 252>;
+ status = "disabled";
+
+ st-plgpio,ngpio = <250>;
+ st-plgpio,wdata-reg = <0x40>;
+ st-plgpio,dir-reg = <0x00>;
+ st-plgpio,ie-reg = <0x80>;
+ st-plgpio,rdata-reg = <0x20>;
+ st-plgpio,mis-reg = <0xa0>;
+ st-plgpio,eit-reg = <0x60>;
+ };
};
};
};