tg3 / broadcom: Optionally disable TXC if no link
This patch adds code to disable the TXC and RXC reference clocks if link
is not available.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 7b10495..f63c96a 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -108,6 +108,7 @@
#define BCM54XX_SHD_SCR3 0x05
#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002
+#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004
/* 01010: Auto Power-Down */
#define BCM54XX_SHD_APD 0x0a
@@ -362,6 +363,9 @@
else
val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+ if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY)
+ val |= BCM54XX_SHD_SCR3_TRDDAPD;
+
if (orig != val)
bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
@@ -409,6 +413,7 @@
bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
+ (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
(phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
bcm54xx_adjust_rxrefclk(phydev);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f74bf91..50bb53d 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1103,6 +1103,7 @@
case TG3_PHY_ID_BCM50610M:
phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE |
PHY_BRCM_RX_REFCLK_UNUSED |
+ PHY_BRCM_DIS_TXCRXC_NOENRGY |
PHY_BRCM_AUTO_PWRDWN_ENABLE;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;