regulator: ab8500: add support for ab8505
To obtain full AB8505 regulator support, the AB8500 regulator driver
first needs to know its register layout and their initialisation values
for each. That information is provided via a couple of large data
structures which we provide here.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 9de3a21..1ab0f8a 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -5,11 +5,15 @@
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
* Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ * Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
*
* AB8500 peripheral regulators
*
* AB8500 supports the following regulators:
* VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
+ *
+ * AB8505 supports the following regulators:
+ * VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -92,6 +96,17 @@
2910000,
};
+static const int ldo_vaux56_voltages[] = {
+ 1800000,
+ 1050000,
+ 1100000,
+ 1200000,
+ 1500000,
+ 2200000,
+ 2500000,
+ 2790000,
+};
+
static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
@@ -589,6 +604,313 @@
},
};
+/* AB8505 regulator information */
+static struct ab8500_regulator_info
+ ab8505_regulator_info[AB8505_NUM_REGULATORS] = {
+ /*
+ * Variable Voltage Regulators
+ * name, min mV, max mV,
+ * update bank, reg, mask, enable val
+ * volt bank, reg, mask, table, table length
+ */
+ [AB8505_LDO_AUX1] = {
+ .desc = {
+ .name = "LDO-AUX1",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX1,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x1f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8505_LDO_AUX2] = {
+ .desc = {
+ .name = "LDO-AUX2",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX2,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x0c,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x20,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8505_LDO_AUX3] = {
+ .desc = {
+ .name = "LDO-AUX3",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX3,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x0a,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x21,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux3_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ [AB8505_LDO_AUX4] = {
+ .desc = {
+ .name = "LDO-AUX4",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB9540_LDO_AUX4,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ /* values for Vaux4Regu register */
+ .update_bank = 0x04,
+ .update_reg = 0x2e,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ /* values for Vaux4SEL register */
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x2f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8505_LDO_AUX5] = {
+ .desc = {
+ .name = "LDO-AUX5",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8505_LDO_AUX5,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ .min_uV = 1050000,
+ .max_uV = 2790000,
+ .load_lp_uA = 2000,
+ /* values for CtrlVaux5 register */
+ .update_bank = 0x01,
+ .update_reg = 0x55,
+ .update_mask = 0x08,
+ .update_val = 0x00,
+ .update_val_idle = 0x01,
+ .update_val_normal = 0x00,
+ .voltage_bank = 0x01,
+ .voltage_reg = 0x55,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux56_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ [AB8505_LDO_AUX6] = {
+ .desc = {
+ .name = "LDO-AUX6",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8505_LDO_AUX6,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ .min_uV = 1050000,
+ .max_uV = 2790000,
+ .load_lp_uA = 2000,
+ /* values for CtrlVaux6 register */
+ .update_bank = 0x01,
+ .update_reg = 0x56,
+ .update_mask = 0x08,
+ .update_val = 0x00,
+ .update_val_idle = 0x01,
+ .update_val_normal = 0x00,
+ .voltage_bank = 0x01,
+ .voltage_reg = 0x56,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux56_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ [AB8505_LDO_INTCORE] = {
+ .desc = {
+ .name = "LDO-INTCORE",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_INTCORE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x44,
+ .update_val = 0x04,
+ .update_val_idle = 0x44,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x03,
+ .voltage_reg = 0x80,
+ .voltage_mask = 0x38,
+ .voltages = ldo_vintcore_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
+ .voltage_shift = 3,
+ },
+
+ /*
+ * Fixed Voltage Regulators
+ * name, fixed mV,
+ * update bank, reg, mask, enable val
+ */
+ [AB8505_LDO_ADC] = {
+ .desc = {
+ .name = "LDO-ADC",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8505_LDO_ADC,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .delay = 10000,
+ .fixed_uV = 2000000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x82,
+ .update_val = 0x02,
+ .update_val_idle = 0x82,
+ .update_val_normal = 0x02,
+ },
+ [AB8505_LDO_USB] = {
+ .desc = {
+ .name = "LDO-USB",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB9540_LDO_USB,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 3300000,
+ .update_bank = 0x03,
+ .update_reg = 0x82,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ },
+ [AB8505_LDO_AUDIO] = {
+ .desc = {
+ .name = "LDO-AUDIO",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUDIO,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2000000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x02,
+ .update_val = 0x02,
+ },
+ [AB8505_LDO_ANAMIC1] = {
+ .desc = {
+ .name = "LDO-ANAMIC1",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC1,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x08,
+ .update_val = 0x08,
+ },
+ [AB8505_LDO_ANAMIC2] = {
+ .desc = {
+ .name = "LDO-ANAMIC2",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC2,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x10,
+ .update_val = 0x10,
+ },
+ [AB8505_LDO_AUX8] = {
+ .desc = {
+ .name = "LDO-AUX8",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8505_LDO_AUX8,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1800000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x04,
+ .update_val = 0x04,
+ },
+ /*
+ * Regulators with fixed voltage and normal/idle modes
+ */
+ [AB8505_LDO_ANA] = {
+ .desc = {
+ .name = "LDO-ANA",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANA,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1200000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x04,
+ .update_reg = 0x06,
+ .update_mask = 0x0c,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
+ },
+};
+
/* AB9540 regulator information */
static struct ab8500_regulator_info
ab9540_regulator_info[AB9540_NUM_REGULATORS] = {
@@ -1031,6 +1353,276 @@
REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
};
+/* AB8505 register init */
+static struct ab8500_reg_init ab8505_reg_init[] = {
+ /*
+ * 0x03, VarmRequestCtrl
+ * 0x0c, VsmpsCRequestCtrl
+ * 0x30, VsmpsARequestCtrl
+ * 0xc0, VsmpsBRequestCtrl
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
+ /*
+ * 0x03, VsafeRequestCtrl
+ * 0x0c, VpllRequestCtrl
+ * 0x30, VanaRequestCtrl
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL2, 0x03, 0x04, 0x3f),
+ /*
+ * 0x30, Vaux1RequestCtrl
+ * 0xc0, Vaux2RequestCtrl
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL3, 0x03, 0x05, 0xf0),
+ /*
+ * 0x03, Vaux3RequestCtrl
+ * 0x04, SwHPReq
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
+ /*
+ * 0x01, VsmpsASysClkReq1HPValid
+ * 0x02, VsmpsBSysClkReq1HPValid
+ * 0x04, VsafeSysClkReq1HPValid
+ * 0x08, VanaSysClkReq1HPValid
+ * 0x10, VpllSysClkReq1HPValid
+ * 0x20, Vaux1SysClkReq1HPValid
+ * 0x40, Vaux2SysClkReq1HPValid
+ * 0x80, Vaux3SysClkReq1HPValid
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
+ /*
+ * 0x01, VsmpsCSysClkReq1HPValid
+ * 0x02, VarmSysClkReq1HPValid
+ * 0x04, VbbSysClkReq1HPValid
+ * 0x08, VsmpsMSysClkReq1HPValid
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x0f),
+ /*
+ * 0x01, VsmpsAHwHPReq1Valid
+ * 0x02, VsmpsBHwHPReq1Valid
+ * 0x04, VsafeHwHPReq1Valid
+ * 0x08, VanaHwHPReq1Valid
+ * 0x10, VpllHwHPReq1Valid
+ * 0x20, Vaux1HwHPReq1Valid
+ * 0x40, Vaux2HwHPReq1Valid
+ * 0x80, Vaux3HwHPReq1Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
+ /*
+ * 0x08, VsmpsMHwHPReq1Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x08),
+ /*
+ * 0x01, VsmpsAHwHPReq2Valid
+ * 0x02, VsmpsBHwHPReq2Valid
+ * 0x04, VsafeHwHPReq2Valid
+ * 0x08, VanaHwHPReq2Valid
+ * 0x10, VpllHwHPReq2Valid
+ * 0x20, Vaux1HwHPReq2Valid
+ * 0x40, Vaux2HwHPReq2Valid
+ * 0x80, Vaux3HwHPReq2Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
+ /*
+ * 0x08, VsmpsMHwHPReq2Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x08),
+ /*
+ * 0x01, VsmpsCSwHPReqValid
+ * 0x02, VarmSwHPReqValid
+ * 0x04, VsmpsASwHPReqValid
+ * 0x08, VsmpsBSwHPReqValid
+ * 0x10, VsafeSwHPReqValid
+ * 0x20, VanaSwHPReqValid
+ * 0x40, VpllSwHPReqValid
+ * 0x80, Vaux1SwHPReqValid
+ */
+ REG_INIT(AB8505_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
+ /*
+ * 0x01, Vaux2SwHPReqValid
+ * 0x02, Vaux3SwHPReqValid
+ * 0x20, VsmpsMSwHPReqValid
+ */
+ REG_INIT(AB8505_REGUSWHPREQVALID2, 0x03, 0x0e, 0x23),
+ /*
+ * 0x02, SysClkReq2Valid1
+ * 0x04, SysClkReq3Valid1
+ * 0x08, SysClkReq4Valid1
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0x0e),
+ /*
+ * 0x02, SysClkReq2Valid2
+ * 0x04, SysClkReq3Valid2
+ * 0x08, SysClkReq4Valid2
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQVALID2, 0x03, 0x10, 0x0e),
+ /*
+ * 0x01, Vaux4SwHPReqValid
+ * 0x02, Vaux4HwHPReq2Valid
+ * 0x04, Vaux4HwHPReq1Valid
+ * 0x08, Vaux4SysClkReq1HPValid
+ */
+ REG_INIT(AB8505_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
+ /*
+ * 0x02, VadcEna
+ * 0x04, VintCore12Ena
+ * 0x38, VintCore12Sel
+ * 0x40, VintCore12LP
+ * 0x80, VadcLP
+ */
+ REG_INIT(AB8505_REGUMISC1, 0x03, 0x80, 0xfe),
+ /*
+ * 0x02, VaudioEna
+ * 0x04, VdmicEna
+ * 0x08, Vamic1Ena
+ * 0x10, Vamic2Ena
+ */
+ REG_INIT(AB8505_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
+ /*
+ * 0x01, Vamic1_dzout
+ * 0x02, Vamic2_dzout
+ */
+ REG_INIT(AB8505_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
+ /*
+ * 0x03, VsmpsARegu
+ * 0x0c, VsmpsASelCtrl
+ * 0x10, VsmpsAAutoMode
+ * 0x20, VsmpsAPWMMode
+ */
+ REG_INIT(AB8505_VSMPSAREGU, 0x04, 0x03, 0x3f),
+ /*
+ * 0x03, VsmpsBRegu
+ * 0x0c, VsmpsBSelCtrl
+ * 0x10, VsmpsBAutoMode
+ * 0x20, VsmpsBPWMMode
+ */
+ REG_INIT(AB8505_VSMPSBREGU, 0x04, 0x04, 0x3f),
+ /*
+ * 0x03, VsafeRegu
+ * 0x0c, VsafeSelCtrl
+ * 0x10, VsafeAutoMode
+ * 0x20, VsafePWMMode
+ */
+ REG_INIT(AB8505_VSAFEREGU, 0x04, 0x05, 0x3f),
+ /*
+ * 0x03, VpllRegu (NOTE! PRCMU register bits)
+ * 0x0c, VanaRegu
+ */
+ REG_INIT(AB8505_VPLLVANAREGU, 0x04, 0x06, 0x0f),
+ /*
+ * 0x03, VextSupply1Regu
+ * 0x0c, VextSupply2Regu
+ * 0x30, VextSupply3Regu
+ * 0x40, ExtSupply2Bypass
+ * 0x80, ExtSupply3Bypass
+ */
+ REG_INIT(AB8505_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
+ /*
+ * 0x03, Vaux1Regu
+ * 0x0c, Vaux2Regu
+ */
+ REG_INIT(AB8505_VAUX12REGU, 0x04, 0x09, 0x0f),
+ /*
+ * 0x0f, Vaux3Regu
+ */
+ REG_INIT(AB8505_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
+ /*
+ * 0x3f, VsmpsASel1
+ */
+ REG_INIT(AB8505_VSMPSASEL1, 0x04, 0x13, 0x3f),
+ /*
+ * 0x3f, VsmpsASel2
+ */
+ REG_INIT(AB8505_VSMPSASEL2, 0x04, 0x14, 0x3f),
+ /*
+ * 0x3f, VsmpsASel3
+ */
+ REG_INIT(AB8505_VSMPSASEL3, 0x04, 0x15, 0x3f),
+ /*
+ * 0x3f, VsmpsBSel1
+ */
+ REG_INIT(AB8505_VSMPSBSEL1, 0x04, 0x17, 0x3f),
+ /*
+ * 0x3f, VsmpsBSel2
+ */
+ REG_INIT(AB8505_VSMPSBSEL2, 0x04, 0x18, 0x3f),
+ /*
+ * 0x3f, VsmpsBSel3
+ */
+ REG_INIT(AB8505_VSMPSBSEL3, 0x04, 0x19, 0x3f),
+ /*
+ * 0x7f, VsafeSel1
+ */
+ REG_INIT(AB8505_VSAFESEL1, 0x04, 0x1b, 0x7f),
+ /*
+ * 0x3f, VsafeSel2
+ */
+ REG_INIT(AB8505_VSAFESEL2, 0x04, 0x1c, 0x7f),
+ /*
+ * 0x3f, VsafeSel3
+ */
+ REG_INIT(AB8505_VSAFESEL3, 0x04, 0x1d, 0x7f),
+ /*
+ * 0x0f, Vaux1Sel
+ */
+ REG_INIT(AB8505_VAUX1SEL, 0x04, 0x1f, 0x0f),
+ /*
+ * 0x0f, Vaux2Sel
+ */
+ REG_INIT(AB8505_VAUX2SEL, 0x04, 0x20, 0x0f),
+ /*
+ * 0x07, Vaux3Sel
+ * 0x30, VRF1Sel
+ */
+ REG_INIT(AB8505_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
+ /*
+ * 0x03, Vaux4RequestCtrl
+ */
+ REG_INIT(AB8505_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
+ /*
+ * 0x03, Vaux4Regu
+ */
+ REG_INIT(AB8505_VAUX4REGU, 0x04, 0x2e, 0x03),
+ /*
+ * 0x0f, Vaux4Sel
+ */
+ REG_INIT(AB8505_VAUX4SEL, 0x04, 0x2f, 0x0f),
+ /*
+ * 0x04, Vaux1Disch
+ * 0x08, Vaux2Disch
+ * 0x10, Vaux3Disch
+ * 0x20, Vintcore12Disch
+ * 0x40, VTVoutDisch
+ * 0x80, VaudioDisch
+ */
+ REG_INIT(AB8505_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
+ /*
+ * 0x02, VanaDisch
+ * 0x04, VdmicPullDownEna
+ * 0x10, VdmicDisch
+ */
+ REG_INIT(AB8505_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
+ /*
+ * 0x01, Vaux4Disch
+ */
+ REG_INIT(AB8505_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
+ /*
+ * 0x07, Vaux5Sel
+ * 0x08, Vaux5LP
+ * 0x10, Vaux5Ena
+ * 0x20, Vaux5Disch
+ * 0x40, Vaux5DisSfst
+ * 0x80, Vaux5DisPulld
+ */
+ REG_INIT(AB8505_CTRLVAUX5, 0x01, 0x55, 0xff),
+ /*
+ * 0x07, Vaux6Sel
+ * 0x08, Vaux6LP
+ * 0x10, Vaux6Ena
+ * 0x80, Vaux6DisPulld
+ */
+ REG_INIT(AB8505_CTRLVAUX6, 0x01, 0x56, 0x9f),
+};
+
/* AB9540 register init */
static struct ab8500_reg_init ab9540_reg_init[] = {
/*
@@ -1396,6 +1988,22 @@
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
+static struct of_regulator_match ab8505_regulator_match[] = {
+ { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8505_LDO_AUX1, },
+ { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8505_LDO_AUX2, },
+ { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8505_LDO_AUX3, },
+ { .name = "ab8500_ldo_aux4", .driver_data = (void *) AB8505_LDO_AUX4, },
+ { .name = "ab8500_ldo_aux5", .driver_data = (void *) AB8505_LDO_AUX5, },
+ { .name = "ab8500_ldo_aux6", .driver_data = (void *) AB8505_LDO_AUX6, },
+ { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8505_LDO_INTCORE, },
+ { .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, },
+ { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, },
+ { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
+ { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, },
+ { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, },
+};
+
static struct of_regulator_match ab9540_regulator_match[] = {
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB9540_LDO_AUX1, },
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB9540_LDO_AUX2, },
@@ -1450,6 +2058,11 @@
reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
match = ab9540_regulator_match;
match_size = ARRAY_SIZE(ab9540_regulator_match)
+ } else if (is_ab8505(ab8500)) {
+ regulator_info = ab8505_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
+ reg_init = ab8505_reg_init;
+ reg_init_size = AB8505_NUM_REGULATOR_REGISTERS;
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
@@ -1543,6 +2156,9 @@
if (is_ab9540(ab8500)) {
regulator_info = ab9540_regulator_info;
regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
+ } else if (is_ab8505(ab8500)) {
+ regulator_info = ab8505_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
@@ -1601,5 +2217,6 @@
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
+MODULE_AUTHOR("Daniel Willerud <daniel.willerud@stericsson.com>");
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
MODULE_ALIAS("platform:ab8500-regulator");