ARM: orion5x: Refactor mpp code to use common orion platform mpp.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 4258075..19cf5bf 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -267,28 +267,28 @@
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Board ID (bit 0) */
- { 1, MPP_GPIO }, /* Board ID (bit 1) */
- { 2, MPP_GPIO }, /* Board ID (bit 2) */
- { 3, MPP_GPIO }, /* SATA 0 power */
- { 4, MPP_UNUSED },
- { 5, MPP_GPIO }, /* Fan fail detection */
- { 6, MPP_GPIO }, /* Red front LED */
- { 7, MPP_UNUSED },
- { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
- { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_GPIO }, /* SATA 1 power */
- { 13, MPP_UNUSED },
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
- { 16, MPP_GPIO }, /* Blue front LED blink control */
- { 17, MPP_UNUSED },
- { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
- { 19, MPP_UNUSED },
- { -1 }
+static unsigned int d2net_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Board ID (bit 0) */
+ MPP1_GPIO, /* Board ID (bit 1) */
+ MPP2_GPIO, /* Board ID (bit 2) */
+ MPP3_GPIO, /* SATA 0 power */
+ MPP4_UNUSED,
+ MPP5_GPIO, /* Fan fail detection */
+ MPP6_GPIO, /* Red front LED */
+ MPP7_UNUSED,
+ MPP8_GPIO, /* Rear power switch (on|auto) */
+ MPP9_GPIO, /* Rear power switch (auto|off) */
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_GPIO, /* SATA 1 power */
+ MPP13_UNUSED,
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_GPIO, /* Blue front LED blink control */
+ MPP17_UNUSED,
+ MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
+ MPP19_UNUSED,
+ 0,
/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
/* 23: Blue front LED off */
/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */