|  | /* | 
|  | * This file is subject to the terms and conditions of the GNU General Public | 
|  | * License.  See the file "COPYING" in the main directory of this archive | 
|  | * for more details. | 
|  | * | 
|  | * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved. | 
|  | */ | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Cross Partition Network Interface (XPNET) support | 
|  | * | 
|  | *	XPNET provides a virtual network layered on top of the Cross | 
|  | *	Partition communication layer. | 
|  | * | 
|  | *	XPNET provides direct point-to-point and broadcast-like support | 
|  | *	for an ethernet-like device.  The ethernet broadcast medium is | 
|  | *	replaced with a point-to-point message structure which passes | 
|  | *	pointers to a DMA-capable block that a remote partition should | 
|  | *	retrieve and pass to the upper level networking layer. | 
|  | * | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/string.h> | 
|  | #include <asm/sn/bte.h> | 
|  | #include <asm/sn/io.h> | 
|  | #include <asm/sn/sn_sal.h> | 
|  | #include <asm/types.h> | 
|  | #include <asm/atomic.h> | 
|  | #include <asm/sn/xp.h> | 
|  |  | 
|  |  | 
|  | /* | 
|  | * The message payload transferred by XPC. | 
|  | * | 
|  | * buf_pa is the physical address where the DMA should pull from. | 
|  | * | 
|  | * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a | 
|  | * cacheline boundary.  To accomplish this, we record the number of | 
|  | * bytes from the beginning of the first cacheline to the first useful | 
|  | * byte of the skb (leadin_ignore) and the number of bytes from the | 
|  | * last useful byte of the skb to the end of the last cacheline | 
|  | * (tailout_ignore). | 
|  | * | 
|  | * size is the number of bytes to transfer which includes the skb->len | 
|  | * (useful bytes of the senders skb) plus the leadin and tailout | 
|  | */ | 
|  | struct xpnet_message { | 
|  | u16 version;		/* Version for this message */ | 
|  | u16 embedded_bytes;	/* #of bytes embedded in XPC message */ | 
|  | u32 magic;		/* Special number indicating this is xpnet */ | 
|  | u64 buf_pa;		/* phys address of buffer to retrieve */ | 
|  | u32 size;		/* #of bytes in buffer */ | 
|  | u8 leadin_ignore;	/* #of bytes to ignore at the beginning */ | 
|  | u8 tailout_ignore;	/* #of bytes to ignore at the end */ | 
|  | unsigned char data;	/* body of small packets */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Determine the size of our message, the cacheline aligned size, | 
|  | * and then the number of message will request from XPC. | 
|  | * | 
|  | * XPC expects each message to exist in an individual cacheline. | 
|  | */ | 
|  | #define XPNET_MSG_SIZE		(L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) | 
|  | #define XPNET_MSG_DATA_MAX	\ | 
|  | (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) | 
|  | #define XPNET_MSG_ALIGNED_SIZE	(L1_CACHE_ALIGN(XPNET_MSG_SIZE)) | 
|  | #define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) | 
|  |  | 
|  |  | 
|  | #define XPNET_MAX_KTHREADS	(XPNET_MSG_NENTRIES + 1) | 
|  | #define XPNET_MAX_IDLE_KTHREADS	(XPNET_MSG_NENTRIES + 1) | 
|  |  | 
|  | /* | 
|  | * Version number of XPNET implementation. XPNET can always talk to versions | 
|  | * with same major #, and never talk to versions with a different version. | 
|  | */ | 
|  | #define _XPNET_VERSION(_major, _minor)	(((_major) << 4) | (_minor)) | 
|  | #define XPNET_VERSION_MAJOR(_v)		((_v) >> 4) | 
|  | #define XPNET_VERSION_MINOR(_v)		((_v) & 0xf) | 
|  |  | 
|  | #define	XPNET_VERSION _XPNET_VERSION(1,0)		/* version 1.0 */ | 
|  | #define	XPNET_VERSION_EMBED _XPNET_VERSION(1,1)		/* version 1.1 */ | 
|  | #define XPNET_MAGIC	0x88786984 /* "XNET" */ | 
|  |  | 
|  | #define XPNET_VALID_MSG(_m)						     \ | 
|  | ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \ | 
|  | && (msg->magic == XPNET_MAGIC)) | 
|  |  | 
|  | #define XPNET_DEVICE_NAME		"xp0" | 
|  |  | 
|  |  | 
|  | /* | 
|  | * When messages are queued with xpc_send_notify, a kmalloc'd buffer | 
|  | * of the following type is passed as a notification cookie.  When the | 
|  | * notification function is called, we use the cookie to decide | 
|  | * whether all outstanding message sends have completed.  The skb can | 
|  | * then be released. | 
|  | */ | 
|  | struct xpnet_pending_msg { | 
|  | struct list_head free_list; | 
|  | struct sk_buff *skb; | 
|  | atomic_t use_count; | 
|  | }; | 
|  |  | 
|  | /* driver specific structure pointed to by the device structure */ | 
|  | struct xpnet_dev_private { | 
|  | struct net_device_stats stats; | 
|  | }; | 
|  |  | 
|  | struct net_device *xpnet_device; | 
|  |  | 
|  | /* | 
|  | * When we are notified of other partitions activating, we add them to | 
|  | * our bitmask of partitions to which we broadcast. | 
|  | */ | 
|  | static u64 xpnet_broadcast_partitions; | 
|  | /* protect above */ | 
|  | static DEFINE_SPINLOCK(xpnet_broadcast_lock); | 
|  |  | 
|  | /* | 
|  | * Since the Block Transfer Engine (BTE) is being used for the transfer | 
|  | * and it relies upon cache-line size transfers, we need to reserve at | 
|  | * least one cache-line for head and tail alignment.  The BTE is | 
|  | * limited to 8MB transfers. | 
|  | * | 
|  | * Testing has shown that changing MTU to greater than 64KB has no effect | 
|  | * on TCP as the two sides negotiate a Max Segment Size that is limited | 
|  | * to 64K.  Other protocols May use packets greater than this, but for | 
|  | * now, the default is 64KB. | 
|  | */ | 
|  | #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES) | 
|  | /* 32KB has been determined to be the ideal */ | 
|  | #define XPNET_DEF_MTU (0x8000UL) | 
|  |  | 
|  |  | 
|  | /* | 
|  | * The partition id is encapsulated in the MAC address.  The following | 
|  | * define locates the octet the partid is in. | 
|  | */ | 
|  | #define XPNET_PARTID_OCTET	1 | 
|  | #define XPNET_LICENSE_OCTET	2 | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Define the XPNET debug device structure that is to be used with dev_dbg(), | 
|  | * dev_err(), dev_warn(), and dev_info(). | 
|  | */ | 
|  | struct device_driver xpnet_dbg_name = { | 
|  | .name = "xpnet" | 
|  | }; | 
|  |  | 
|  | struct device xpnet_dbg_subname = { | 
|  | .bus_id = {0},			/* set to "" */ | 
|  | .driver = &xpnet_dbg_name | 
|  | }; | 
|  |  | 
|  | struct device *xpnet = &xpnet_dbg_subname; | 
|  |  | 
|  | /* | 
|  | * Packet was recevied by XPC and forwarded to us. | 
|  | */ | 
|  | static void | 
|  | xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | bte_result_t bret; | 
|  | struct xpnet_dev_private *priv = | 
|  | (struct xpnet_dev_private *) xpnet_device->priv; | 
|  |  | 
|  |  | 
|  | if (!XPNET_VALID_MSG(msg)) { | 
|  | /* | 
|  | * Packet with a different XPC version.  Ignore. | 
|  | */ | 
|  | xpc_received(partid, channel, (void *) msg); | 
|  |  | 
|  | priv->stats.rx_errors++; | 
|  |  | 
|  | return; | 
|  | } | 
|  | dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, | 
|  | msg->leadin_ignore, msg->tailout_ignore); | 
|  |  | 
|  |  | 
|  | /* reserve an extra cache line */ | 
|  | skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); | 
|  | if (!skb) { | 
|  | dev_err(xpnet, "failed on dev_alloc_skb(%d)\n", | 
|  | msg->size + L1_CACHE_BYTES); | 
|  |  | 
|  | xpc_received(partid, channel, (void *) msg); | 
|  |  | 
|  | priv->stats.rx_errors++; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The allocated skb has some reserved space. | 
|  | * In order to use bte_copy, we need to get the | 
|  | * skb->data pointer moved forward. | 
|  | */ | 
|  | skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & | 
|  | (L1_CACHE_BYTES - 1)) + | 
|  | msg->leadin_ignore)); | 
|  |  | 
|  | /* | 
|  | * Update the tail pointer to indicate data actually | 
|  | * transferred. | 
|  | */ | 
|  | skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore)); | 
|  |  | 
|  | /* | 
|  | * Move the data over from the other side. | 
|  | */ | 
|  | if ((XPNET_VERSION_MINOR(msg->version) == 1) && | 
|  | (msg->embedded_bytes != 0)) { | 
|  | dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, " | 
|  | "%lu)\n", skb->data, &msg->data, | 
|  | (size_t) msg->embedded_bytes); | 
|  |  | 
|  | skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes); | 
|  | } else { | 
|  | dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" | 
|  | "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, | 
|  | (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), | 
|  | msg->size); | 
|  |  | 
|  | bret = bte_copy(msg->buf_pa, | 
|  | __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), | 
|  | msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); | 
|  |  | 
|  | if (bret != BTE_SUCCESS) { | 
|  | // >>> Need better way of cleaning skb.  Currently skb | 
|  | // >>> appears in_use and we can't just call | 
|  | // >>> dev_kfree_skb. | 
|  | dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " | 
|  | "error=0x%x\n", (void *)msg->buf_pa, | 
|  | (void *)__pa((u64)skb->data & | 
|  | ~(L1_CACHE_BYTES - 1)), | 
|  | msg->size, bret); | 
|  |  | 
|  | xpc_received(partid, channel, (void *) msg); | 
|  |  | 
|  | priv->stats.rx_errors++; | 
|  |  | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p " | 
|  | "skb->end=0x%p skb->len=%d\n", (void *) skb->head, | 
|  | (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), | 
|  | skb->len); | 
|  |  | 
|  | skb->protocol = eth_type_trans(skb, xpnet_device); | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  |  | 
|  | dev_dbg(xpnet, "passing skb to network layer\n" | 
|  | KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " | 
|  | "skb->end=0x%p skb->len=%d\n", | 
|  | (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), | 
|  | skb_end_pointer(skb), skb->len); | 
|  |  | 
|  |  | 
|  | xpnet_device->last_rx = jiffies; | 
|  | priv->stats.rx_packets++; | 
|  | priv->stats.rx_bytes += skb->len + ETH_HLEN; | 
|  |  | 
|  | netif_rx_ni(skb); | 
|  | xpc_received(partid, channel, (void *) msg); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * This is the handler which XPC calls during any sort of change in | 
|  | * state or message reception on a connection. | 
|  | */ | 
|  | static void | 
|  | xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel, | 
|  | void *data, void *key) | 
|  | { | 
|  | long bp; | 
|  |  | 
|  |  | 
|  | DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); | 
|  | DBUG_ON(channel != XPC_NET_CHANNEL); | 
|  |  | 
|  | switch(reason) { | 
|  | case xpcMsgReceived:	/* message received */ | 
|  | DBUG_ON(data == NULL); | 
|  |  | 
|  | xpnet_receive(partid, channel, (struct xpnet_message *) data); | 
|  | break; | 
|  |  | 
|  | case xpcConnected:	/* connection completed to a partition */ | 
|  | spin_lock_bh(&xpnet_broadcast_lock); | 
|  | xpnet_broadcast_partitions |= 1UL << (partid -1 ); | 
|  | bp = xpnet_broadcast_partitions; | 
|  | spin_unlock_bh(&xpnet_broadcast_lock); | 
|  |  | 
|  | netif_carrier_on(xpnet_device); | 
|  |  | 
|  | dev_dbg(xpnet, "%s connection created to partition %d; " | 
|  | "xpnet_broadcast_partitions=0x%lx\n", | 
|  | xpnet_device->name, partid, bp); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | spin_lock_bh(&xpnet_broadcast_lock); | 
|  | xpnet_broadcast_partitions &= ~(1UL << (partid -1 )); | 
|  | bp = xpnet_broadcast_partitions; | 
|  | spin_unlock_bh(&xpnet_broadcast_lock); | 
|  |  | 
|  | if (bp == 0) { | 
|  | netif_carrier_off(xpnet_device); | 
|  | } | 
|  |  | 
|  | dev_dbg(xpnet, "%s disconnected from partition %d; " | 
|  | "xpnet_broadcast_partitions=0x%lx\n", | 
|  | xpnet_device->name, partid, bp); | 
|  | break; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | xpnet_dev_open(struct net_device *dev) | 
|  | { | 
|  | enum xpc_retval ret; | 
|  |  | 
|  |  | 
|  | dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, " | 
|  | "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity, | 
|  | XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, | 
|  | XPNET_MAX_IDLE_KTHREADS); | 
|  |  | 
|  | ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, | 
|  | XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, | 
|  | XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS); | 
|  | if (ret != xpcSuccess) { | 
|  | dev_err(xpnet, "ifconfig up of %s failed on XPC connect, " | 
|  | "ret=%d\n", dev->name, ret); | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | xpnet_dev_stop(struct net_device *dev) | 
|  | { | 
|  | xpc_disconnect(XPC_NET_CHANNEL); | 
|  |  | 
|  | dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | xpnet_dev_change_mtu(struct net_device *dev, int new_mtu) | 
|  | { | 
|  | /* 68 comes from min TCP+IP+MAC header */ | 
|  | if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) { | 
|  | dev_err(xpnet, "ifconfig %s mtu %d failed; value must be " | 
|  | "between 68 and %ld\n", dev->name, new_mtu, | 
|  | XPNET_MAX_MTU); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev->mtu = new_mtu; | 
|  | dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Required for the net_device structure. | 
|  | */ | 
|  | static int | 
|  | xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Return statistics to the caller. | 
|  | */ | 
|  | static struct net_device_stats * | 
|  | xpnet_dev_get_stats(struct net_device *dev) | 
|  | { | 
|  | struct xpnet_dev_private *priv; | 
|  |  | 
|  |  | 
|  | priv = (struct xpnet_dev_private *) dev->priv; | 
|  |  | 
|  | return &priv->stats; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Notification that the other end has received the message and | 
|  | * DMA'd the skb information.  At this point, they are done with | 
|  | * our side.  When all recipients are done processing, we | 
|  | * release the skb and then release our pending message structure. | 
|  | */ | 
|  | static void | 
|  | xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel, | 
|  | void *__qm) | 
|  | { | 
|  | struct xpnet_pending_msg *queued_msg = | 
|  | (struct xpnet_pending_msg *) __qm; | 
|  |  | 
|  |  | 
|  | DBUG_ON(queued_msg == NULL); | 
|  |  | 
|  | dev_dbg(xpnet, "message to %d notified with reason %d\n", | 
|  | partid, reason); | 
|  |  | 
|  | if (atomic_dec_return(&queued_msg->use_count) == 0) { | 
|  | dev_dbg(xpnet, "all acks for skb->head=-x%p\n", | 
|  | (void *) queued_msg->skb->head); | 
|  |  | 
|  | dev_kfree_skb_any(queued_msg->skb); | 
|  | kfree(queued_msg); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Network layer has formatted a packet (skb) and is ready to place it | 
|  | * "on the wire".  Prepare and send an xpnet_message to all partitions | 
|  | * which have connected with us and are targets of this packet. | 
|  | * | 
|  | * MAC-NOTE:  For the XPNET driver, the MAC address contains the | 
|  | * destination partition_id.  If the destination partition id word | 
|  | * is 0xff, this packet is to broadcast to all partitions. | 
|  | */ | 
|  | static int | 
|  | xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct xpnet_pending_msg *queued_msg; | 
|  | enum xpc_retval ret; | 
|  | struct xpnet_message *msg; | 
|  | u64 start_addr, end_addr; | 
|  | long dp; | 
|  | u8 second_mac_octet; | 
|  | partid_t dest_partid; | 
|  | struct xpnet_dev_private *priv; | 
|  | u16 embedded_bytes; | 
|  |  | 
|  |  | 
|  | priv = (struct xpnet_dev_private *) dev->priv; | 
|  |  | 
|  |  | 
|  | dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " | 
|  | "skb->end=0x%p skb->len=%d\n", (void *) skb->head, | 
|  | (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), | 
|  | skb->len); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * The xpnet_pending_msg tracks how many outstanding | 
|  | * xpc_send_notifies are relying on this skb.  When none | 
|  | * remain, release the skb. | 
|  | */ | 
|  | queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC); | 
|  | if (queued_msg == NULL) { | 
|  | dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping " | 
|  | "packet\n", sizeof(struct xpnet_pending_msg)); | 
|  |  | 
|  | priv->stats.tx_errors++; | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* get the beginning of the first cacheline and end of last */ | 
|  | start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1)); | 
|  | end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb)); | 
|  |  | 
|  | /* calculate how many bytes to embed in the XPC message */ | 
|  | embedded_bytes = 0; | 
|  | if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { | 
|  | /* skb->data does fit so embed */ | 
|  | embedded_bytes = skb->len; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Since the send occurs asynchronously, we set the count to one | 
|  | * and begin sending.  Any sends that happen to complete before | 
|  | * we are done sending will not free the skb.  We will be left | 
|  | * with that task during exit.  This also handles the case of | 
|  | * a packet destined for a partition which is no longer up. | 
|  | */ | 
|  | atomic_set(&queued_msg->use_count, 1); | 
|  | queued_msg->skb = skb; | 
|  |  | 
|  |  | 
|  | second_mac_octet = skb->data[XPNET_PARTID_OCTET]; | 
|  | if (second_mac_octet == 0xff) { | 
|  | /* we are being asked to broadcast to all partitions */ | 
|  | dp = xpnet_broadcast_partitions; | 
|  | } else if (second_mac_octet != 0) { | 
|  | dp = xpnet_broadcast_partitions & | 
|  | (1UL << (second_mac_octet - 1)); | 
|  | } else { | 
|  | /* 0 is an invalid partid.  Ignore */ | 
|  | dp = 0; | 
|  | } | 
|  | dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); | 
|  |  | 
|  | /* | 
|  | * If we wanted to allow promiscuous mode to work like an | 
|  | * unswitched network, this would be a good point to OR in a | 
|  | * mask of partitions which should be receiving all packets. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Main send loop. | 
|  | */ | 
|  | for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; | 
|  | dest_partid++) { | 
|  |  | 
|  |  | 
|  | if (!(dp & (1UL << (dest_partid - 1)))) { | 
|  | /* not destined for this partition */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* remove this partition from the destinations mask */ | 
|  | dp &= ~(1UL << (dest_partid - 1)); | 
|  |  | 
|  |  | 
|  | /* found a partition to send to */ | 
|  |  | 
|  | ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, | 
|  | XPC_NOWAIT, (void **)&msg); | 
|  | if (unlikely(ret != xpcSuccess)) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | msg->embedded_bytes = embedded_bytes; | 
|  | if (unlikely(embedded_bytes != 0)) { | 
|  | msg->version = XPNET_VERSION_EMBED; | 
|  | dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", | 
|  | &msg->data, skb->data, (size_t) embedded_bytes); | 
|  | skb_copy_from_linear_data(skb, &msg->data, | 
|  | (size_t)embedded_bytes); | 
|  | } else { | 
|  | msg->version = XPNET_VERSION; | 
|  | } | 
|  | msg->magic = XPNET_MAGIC; | 
|  | msg->size = end_addr - start_addr; | 
|  | msg->leadin_ignore = (u64) skb->data - start_addr; | 
|  | msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); | 
|  | msg->buf_pa = __pa(start_addr); | 
|  |  | 
|  | dev_dbg(xpnet, "sending XPC message to %d:%d\n" | 
|  | KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " | 
|  | "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", | 
|  | dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, | 
|  | msg->leadin_ignore, msg->tailout_ignore); | 
|  |  | 
|  |  | 
|  | atomic_inc(&queued_msg->use_count); | 
|  |  | 
|  | ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, | 
|  | xpnet_send_completed, queued_msg); | 
|  | if (unlikely(ret != xpcSuccess)) { | 
|  | atomic_dec(&queued_msg->use_count); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | if (atomic_dec_return(&queued_msg->use_count) == 0) { | 
|  | dev_dbg(xpnet, "no partitions to receive packet destined for " | 
|  | "%d\n", dest_partid); | 
|  |  | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  | kfree(queued_msg); | 
|  | } | 
|  |  | 
|  | priv->stats.tx_packets++; | 
|  | priv->stats.tx_bytes += skb->len; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Deal with transmit timeouts coming from the network layer. | 
|  | */ | 
|  | static void | 
|  | xpnet_dev_tx_timeout (struct net_device *dev) | 
|  | { | 
|  | struct xpnet_dev_private *priv; | 
|  |  | 
|  |  | 
|  | priv = (struct xpnet_dev_private *) dev->priv; | 
|  |  | 
|  | priv->stats.tx_errors++; | 
|  | return; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | xpnet_init(void) | 
|  | { | 
|  | int i; | 
|  | u32 license_num; | 
|  | int result = -ENOMEM; | 
|  |  | 
|  |  | 
|  | if (!ia64_platform_is("sn2")) { | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); | 
|  |  | 
|  | /* | 
|  | * use ether_setup() to init the majority of our device | 
|  | * structure and then override the necessary pieces. | 
|  | */ | 
|  | xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), | 
|  | XPNET_DEVICE_NAME, ether_setup); | 
|  | if (xpnet_device == NULL) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | netif_carrier_off(xpnet_device); | 
|  |  | 
|  | xpnet_device->mtu = XPNET_DEF_MTU; | 
|  | xpnet_device->change_mtu = xpnet_dev_change_mtu; | 
|  | xpnet_device->open = xpnet_dev_open; | 
|  | xpnet_device->get_stats = xpnet_dev_get_stats; | 
|  | xpnet_device->stop = xpnet_dev_stop; | 
|  | xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit; | 
|  | xpnet_device->tx_timeout = xpnet_dev_tx_timeout; | 
|  | xpnet_device->set_config = xpnet_dev_set_config; | 
|  |  | 
|  | /* | 
|  | * Multicast assumes the LSB of the first octet is set for multicast | 
|  | * MAC addresses.  We chose the first octet of the MAC to be unlikely | 
|  | * to collide with any vendor's officially issued MAC. | 
|  | */ | 
|  | xpnet_device->dev_addr[0] = 0xfe; | 
|  | xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; | 
|  | license_num = sn_partition_serial_number_val(); | 
|  | for (i = 3; i >= 0; i--) { | 
|  | xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = | 
|  | license_num & 0xff; | 
|  | license_num = license_num >> 8; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ether_setup() sets this to a multicast device.  We are | 
|  | * really not supporting multicast at this time. | 
|  | */ | 
|  | xpnet_device->flags &= ~IFF_MULTICAST; | 
|  |  | 
|  | /* | 
|  | * No need to checksum as it is a DMA transfer.  The BTE will | 
|  | * report an error if the data is not retrievable and the | 
|  | * packet will be dropped. | 
|  | */ | 
|  | xpnet_device->features = NETIF_F_NO_CSUM; | 
|  |  | 
|  | result = register_netdev(xpnet_device); | 
|  | if (result != 0) { | 
|  | free_netdev(xpnet_device); | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  | module_init(xpnet_init); | 
|  |  | 
|  |  | 
|  | static void __exit | 
|  | xpnet_exit(void) | 
|  | { | 
|  | dev_info(xpnet, "unregistering network device %s\n", | 
|  | xpnet_device[0].name); | 
|  |  | 
|  | unregister_netdev(xpnet_device); | 
|  |  | 
|  | free_netdev(xpnet_device); | 
|  | } | 
|  | module_exit(xpnet_exit); | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Silicon Graphics, Inc."); | 
|  | MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  |