| /* | 
 |  *    pata_winbond.c - Winbond VLB ATA controllers | 
 |  *	(C) 2006 Red Hat | 
 |  * | 
 |  *    Support for the Winbond 83759A when operating in advanced mode. | 
 |  *    Multichip mode is not currently supported. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/delay.h> | 
 | #include <scsi/scsi_host.h> | 
 | #include <linux/libata.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #define DRV_NAME "pata_winbond" | 
 | #define DRV_VERSION "0.0.3" | 
 |  | 
 | #define NR_HOST 4	/* Two winbond controllers, two channels each */ | 
 |  | 
 | struct winbond_data { | 
 | 	unsigned long config; | 
 | 	struct platform_device *platform_dev; | 
 | }; | 
 |  | 
 | static struct ata_host *winbond_host[NR_HOST]; | 
 | static struct winbond_data winbond_data[NR_HOST]; | 
 | static int nr_winbond_host; | 
 |  | 
 | #ifdef MODULE | 
 | static int probe_winbond = 1; | 
 | #else | 
 | static int probe_winbond; | 
 | #endif | 
 |  | 
 | static DEFINE_SPINLOCK(winbond_lock); | 
 |  | 
 | static void winbond_writecfg(unsigned long port, u8 reg, u8 val) | 
 | { | 
 | 	unsigned long flags; | 
 | 	spin_lock_irqsave(&winbond_lock, flags); | 
 | 	outb(reg, port + 0x01); | 
 | 	outb(val, port + 0x02); | 
 | 	spin_unlock_irqrestore(&winbond_lock, flags); | 
 | } | 
 |  | 
 | static u8 winbond_readcfg(unsigned long port, u8 reg) | 
 | { | 
 | 	u8 val; | 
 |  | 
 | 	unsigned long flags; | 
 | 	spin_lock_irqsave(&winbond_lock, flags); | 
 | 	outb(reg, port + 0x01); | 
 | 	val = inb(port + 0x02); | 
 | 	spin_unlock_irqrestore(&winbond_lock, flags); | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) | 
 | { | 
 | 	struct ata_timing t; | 
 | 	struct winbond_data *winbond = ap->host->private_data; | 
 | 	int active, recovery; | 
 | 	u8 reg; | 
 | 	int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); | 
 |  | 
 | 	reg = winbond_readcfg(winbond->config, 0x81); | 
 |  | 
 | 	/* Get the timing data in cycles */ | 
 | 	if (reg & 0x40)		/* Fast VLB bus, assume 50MHz */ | 
 | 		ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); | 
 | 	else | 
 | 		ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); | 
 |  | 
 | 	active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; | 
 | 	recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; | 
 | 	timing = (active << 4) | recovery; | 
 | 	winbond_writecfg(winbond->config, timing, reg); | 
 |  | 
 | 	/* Load the setup timing */ | 
 |  | 
 | 	reg = 0x35; | 
 | 	if (adev->class != ATA_DEV_ATA) | 
 | 		reg |= 0x08;	/* FIFO off */ | 
 | 	if (!ata_pio_need_iordy(adev)) | 
 | 		reg |= 0x02;	/* IORDY off */ | 
 | 	reg |= (clamp_val(t.setup, 0, 3) << 6); | 
 | 	winbond_writecfg(winbond->config, timing + 1, reg); | 
 | } | 
 |  | 
 |  | 
 | static unsigned int winbond_data_xfer(struct ata_device *dev, | 
 | 			unsigned char *buf, unsigned int buflen, int rw) | 
 | { | 
 | 	struct ata_port *ap = dev->link->ap; | 
 | 	int slop = buflen & 3; | 
 |  | 
 | 	if (ata_id_has_dword_io(dev->id)) { | 
 | 		if (rw == READ) | 
 | 			ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); | 
 | 		else | 
 | 			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); | 
 |  | 
 | 		if (unlikely(slop)) { | 
 | 			__le32 pad; | 
 | 			if (rw == READ) { | 
 | 				pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); | 
 | 				memcpy(buf + buflen - slop, &pad, slop); | 
 | 			} else { | 
 | 				memcpy(&pad, buf + buflen - slop, slop); | 
 | 				iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); | 
 | 			} | 
 | 			buflen += 4 - slop; | 
 | 		} | 
 | 	} else | 
 | 		buflen = ata_sff_data_xfer(dev, buf, buflen, rw); | 
 |  | 
 | 	return buflen; | 
 | } | 
 |  | 
 | static struct scsi_host_template winbond_sht = { | 
 | 	ATA_PIO_SHT(DRV_NAME), | 
 | }; | 
 |  | 
 | static struct ata_port_operations winbond_port_ops = { | 
 | 	.inherits	= &ata_sff_port_ops, | 
 | 	.sff_data_xfer	= winbond_data_xfer, | 
 | 	.cable_detect	= ata_cable_40wire, | 
 | 	.set_piomode	= winbond_set_piomode, | 
 | }; | 
 |  | 
 | /** | 
 |  *	winbond_init_one		-	attach a winbond interface | 
 |  *	@type: Type to display | 
 |  *	@io: I/O port start | 
 |  *	@irq: interrupt line | 
 |  *	@fast: True if on a > 33Mhz VLB | 
 |  * | 
 |  *	Register a VLB bus IDE interface. Such interfaces are PIO and we | 
 |  *	assume do not support IRQ sharing. | 
 |  */ | 
 |  | 
 | static __init int winbond_init_one(unsigned long port) | 
 | { | 
 | 	struct platform_device *pdev; | 
 | 	u8 reg; | 
 | 	int i, rc; | 
 |  | 
 | 	reg = winbond_readcfg(port, 0x81); | 
 | 	reg |= 0x80;	/* jumpered mode off */ | 
 | 	winbond_writecfg(port, 0x81, reg); | 
 | 	reg = winbond_readcfg(port, 0x83); | 
 | 	reg |= 0xF0;	/* local control */ | 
 | 	winbond_writecfg(port, 0x83, reg); | 
 | 	reg = winbond_readcfg(port, 0x85); | 
 | 	reg |= 0xF0;	/* programmable timing */ | 
 | 	winbond_writecfg(port, 0x85, reg); | 
 |  | 
 | 	reg = winbond_readcfg(port, 0x81); | 
 |  | 
 | 	if (!(reg & 0x03))		/* Disabled */ | 
 | 		return -ENODEV; | 
 |  | 
 | 	for (i = 0; i < 2 ; i ++) { | 
 | 		unsigned long cmd_port = 0x1F0 - (0x80 * i); | 
 | 		unsigned long ctl_port = cmd_port + 0x206; | 
 | 		struct ata_host *host; | 
 | 		struct ata_port *ap; | 
 | 		void __iomem *cmd_addr, *ctl_addr; | 
 |  | 
 | 		if (!(reg & (1 << i))) | 
 | 			continue; | 
 |  | 
 | 		pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0); | 
 | 		if (IS_ERR(pdev)) | 
 | 			return PTR_ERR(pdev); | 
 |  | 
 | 		rc = -ENOMEM; | 
 | 		host = ata_host_alloc(&pdev->dev, 1); | 
 | 		if (!host) | 
 | 			goto err_unregister; | 
 | 		ap = host->ports[0]; | 
 |  | 
 | 		rc = -ENOMEM; | 
 | 		cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); | 
 | 		ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1); | 
 | 		if (!cmd_addr || !ctl_addr) | 
 | 			goto err_unregister; | 
 |  | 
 | 		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); | 
 |  | 
 | 		ap->ops = &winbond_port_ops; | 
 | 		ap->pio_mask = ATA_PIO4; | 
 | 		ap->flags |= ATA_FLAG_SLAVE_POSS; | 
 | 		ap->ioaddr.cmd_addr = cmd_addr; | 
 | 		ap->ioaddr.altstatus_addr = ctl_addr; | 
 | 		ap->ioaddr.ctl_addr = ctl_addr; | 
 | 		ata_sff_std_ports(&ap->ioaddr); | 
 |  | 
 | 		/* hook in a private data structure per channel */ | 
 | 		host->private_data = &winbond_data[nr_winbond_host]; | 
 | 		winbond_data[nr_winbond_host].config = port; | 
 | 		winbond_data[nr_winbond_host].platform_dev = pdev; | 
 |  | 
 | 		/* activate */ | 
 | 		rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0, | 
 | 				       &winbond_sht); | 
 | 		if (rc) | 
 | 			goto err_unregister; | 
 |  | 
 | 		winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 |  err_unregister: | 
 | 	platform_device_unregister(pdev); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  *	winbond_init		-	attach winbond interfaces | 
 |  * | 
 |  *	Attach winbond IDE interfaces by scanning the ports it may occupy. | 
 |  */ | 
 |  | 
 | static __init int winbond_init(void) | 
 | { | 
 | 	static const unsigned long config[2] = { 0x130, 0x1B0 }; | 
 |  | 
 | 	int ct = 0; | 
 | 	int i; | 
 |  | 
 | 	if (probe_winbond == 0) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* | 
 |  	 *	Check both base addresses | 
 | 	 */ | 
 |  | 
 | 	for (i = 0; i < 2; i++) { | 
 | 		if (probe_winbond & (1<<i)) { | 
 | 			int ret = 0; | 
 | 			unsigned long port = config[i]; | 
 |  | 
 | 			if (request_region(port, 2, "pata_winbond")) { | 
 | 				ret = winbond_init_one(port); | 
 | 				if (ret <= 0) | 
 | 					release_region(port, 2); | 
 | 				else ct+= ret; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	if (ct != 0) | 
 | 		return 0; | 
 | 	return -ENODEV; | 
 | } | 
 |  | 
 | static __exit void winbond_exit(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < nr_winbond_host; i++) { | 
 | 		ata_host_detach(winbond_host[i]); | 
 | 		release_region(winbond_data[i].config, 2); | 
 | 		platform_device_unregister(winbond_data[i].platform_dev); | 
 | 	} | 
 | } | 
 |  | 
 | MODULE_AUTHOR("Alan Cox"); | 
 | MODULE_DESCRIPTION("low-level driver for Winbond VL ATA"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_VERSION(DRV_VERSION); | 
 |  | 
 | module_init(winbond_init); | 
 | module_exit(winbond_exit); | 
 |  | 
 | module_param(probe_winbond, int, 0); | 
 |  |