|  | /* | 
|  | * drivers/mmc/host/omap_hsmmc.c | 
|  | * | 
|  | * Driver for OMAP2430/3430 MMC controller. | 
|  | * | 
|  | * Copyright (C) 2007 Texas Instruments. | 
|  | * | 
|  | * Authors: | 
|  | *	Syed Mohammed Khasim	<x0khasim@ti.com> | 
|  | *	Madhusudhan		<madhu.cr@ti.com> | 
|  | *	Mohit Jalori		<mjalori@ti.com> | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public License | 
|  | * version 2. This program is licensed "as is" without any warranty of any | 
|  | * kind, whether express or implied. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mmc/core.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/semaphore.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <plat/dma.h> | 
|  | #include <mach/hardware.h> | 
|  | #include <plat/board.h> | 
|  | #include <plat/mmc.h> | 
|  | #include <plat/cpu.h> | 
|  |  | 
|  | /* OMAP HSMMC Host Controller Registers */ | 
|  | #define OMAP_HSMMC_SYSCONFIG	0x0010 | 
|  | #define OMAP_HSMMC_SYSSTATUS	0x0014 | 
|  | #define OMAP_HSMMC_CON		0x002C | 
|  | #define OMAP_HSMMC_BLK		0x0104 | 
|  | #define OMAP_HSMMC_ARG		0x0108 | 
|  | #define OMAP_HSMMC_CMD		0x010C | 
|  | #define OMAP_HSMMC_RSP10	0x0110 | 
|  | #define OMAP_HSMMC_RSP32	0x0114 | 
|  | #define OMAP_HSMMC_RSP54	0x0118 | 
|  | #define OMAP_HSMMC_RSP76	0x011C | 
|  | #define OMAP_HSMMC_DATA		0x0120 | 
|  | #define OMAP_HSMMC_HCTL		0x0128 | 
|  | #define OMAP_HSMMC_SYSCTL	0x012C | 
|  | #define OMAP_HSMMC_STAT		0x0130 | 
|  | #define OMAP_HSMMC_IE		0x0134 | 
|  | #define OMAP_HSMMC_ISE		0x0138 | 
|  | #define OMAP_HSMMC_CAPA		0x0140 | 
|  |  | 
|  | #define VS18			(1 << 26) | 
|  | #define VS30			(1 << 25) | 
|  | #define SDVS18			(0x5 << 9) | 
|  | #define SDVS30			(0x6 << 9) | 
|  | #define SDVS33			(0x7 << 9) | 
|  | #define SDVS_MASK		0x00000E00 | 
|  | #define SDVSCLR			0xFFFFF1FF | 
|  | #define SDVSDET			0x00000400 | 
|  | #define AUTOIDLE		0x1 | 
|  | #define SDBP			(1 << 8) | 
|  | #define DTO			0xe | 
|  | #define ICE			0x1 | 
|  | #define ICS			0x2 | 
|  | #define CEN			(1 << 2) | 
|  | #define CLKD_MASK		0x0000FFC0 | 
|  | #define CLKD_SHIFT		6 | 
|  | #define DTO_MASK		0x000F0000 | 
|  | #define DTO_SHIFT		16 | 
|  | #define INT_EN_MASK		0x307F0033 | 
|  | #define BWR_ENABLE		(1 << 4) | 
|  | #define BRR_ENABLE		(1 << 5) | 
|  | #define INIT_STREAM		(1 << 1) | 
|  | #define DP_SELECT		(1 << 21) | 
|  | #define DDIR			(1 << 4) | 
|  | #define DMA_EN			0x1 | 
|  | #define MSBS			(1 << 5) | 
|  | #define BCE			(1 << 1) | 
|  | #define FOUR_BIT		(1 << 1) | 
|  | #define DW8			(1 << 5) | 
|  | #define CC			0x1 | 
|  | #define TC			0x02 | 
|  | #define OD			0x1 | 
|  | #define ERR			(1 << 15) | 
|  | #define CMD_TIMEOUT		(1 << 16) | 
|  | #define DATA_TIMEOUT		(1 << 20) | 
|  | #define CMD_CRC			(1 << 17) | 
|  | #define DATA_CRC		(1 << 21) | 
|  | #define CARD_ERR		(1 << 28) | 
|  | #define STAT_CLEAR		0xFFFFFFFF | 
|  | #define INIT_STREAM_CMD		0x00000000 | 
|  | #define DUAL_VOLT_OCR_BIT	7 | 
|  | #define SRC			(1 << 25) | 
|  | #define SRD			(1 << 26) | 
|  | #define SOFTRESET		(1 << 1) | 
|  | #define RESETDONE		(1 << 0) | 
|  |  | 
|  | /* | 
|  | * FIXME: Most likely all the data using these _DEVID defines should come | 
|  | * from the platform_data, or implemented in controller and slot specific | 
|  | * functions. | 
|  | */ | 
|  | #define OMAP_MMC1_DEVID		0 | 
|  | #define OMAP_MMC2_DEVID		1 | 
|  | #define OMAP_MMC3_DEVID		2 | 
|  | #define OMAP_MMC4_DEVID		3 | 
|  | #define OMAP_MMC5_DEVID		4 | 
|  |  | 
|  | #define MMC_TIMEOUT_MS		20 | 
|  | #define OMAP_MMC_MASTER_CLOCK	96000000 | 
|  | #define DRIVER_NAME		"mmci-omap-hs" | 
|  |  | 
|  | /* Timeouts for entering power saving states on inactivity, msec */ | 
|  | #define OMAP_MMC_DISABLED_TIMEOUT	100 | 
|  | #define OMAP_MMC_SLEEP_TIMEOUT		1000 | 
|  | #define OMAP_MMC_OFF_TIMEOUT		8000 | 
|  |  | 
|  | /* | 
|  | * One controller can have multiple slots, like on some omap boards using | 
|  | * omap.c controller driver. Luckily this is not currently done on any known | 
|  | * omap_hsmmc.c device. | 
|  | */ | 
|  | #define mmc_slot(host)		(host->pdata->slots[host->slot_id]) | 
|  |  | 
|  | /* | 
|  | * MMC Host controller read/write API's | 
|  | */ | 
|  | #define OMAP_HSMMC_READ(base, reg)	\ | 
|  | __raw_readl((base) + OMAP_HSMMC_##reg) | 
|  |  | 
|  | #define OMAP_HSMMC_WRITE(base, reg, val) \ | 
|  | __raw_writel((val), (base) + OMAP_HSMMC_##reg) | 
|  |  | 
|  | struct omap_hsmmc_host { | 
|  | struct	device		*dev; | 
|  | struct	mmc_host	*mmc; | 
|  | struct	mmc_request	*mrq; | 
|  | struct	mmc_command	*cmd; | 
|  | struct	mmc_data	*data; | 
|  | struct	clk		*fclk; | 
|  | struct	clk		*iclk; | 
|  | struct	clk		*dbclk; | 
|  | /* | 
|  | * vcc == configured supply | 
|  | * vcc_aux == optional | 
|  | *   -	MMC1, supply for DAT4..DAT7 | 
|  | *   -	MMC2/MMC2, external level shifter voltage supply, for | 
|  | *	chip (SDIO, eMMC, etc) or transceiver (MMC2 only) | 
|  | */ | 
|  | struct	regulator	*vcc; | 
|  | struct	regulator	*vcc_aux; | 
|  | struct	work_struct	mmc_carddetect_work; | 
|  | void	__iomem		*base; | 
|  | resource_size_t		mapbase; | 
|  | spinlock_t		irq_lock; /* Prevent races with irq handler */ | 
|  | unsigned int		id; | 
|  | unsigned int		dma_len; | 
|  | unsigned int		dma_sg_idx; | 
|  | unsigned char		bus_mode; | 
|  | unsigned char		power_mode; | 
|  | u32			*buffer; | 
|  | u32			bytesleft; | 
|  | int			suspended; | 
|  | int			irq; | 
|  | int			use_dma, dma_ch; | 
|  | int			dma_line_tx, dma_line_rx; | 
|  | int			slot_id; | 
|  | int			got_dbclk; | 
|  | int			response_busy; | 
|  | int			context_loss; | 
|  | int			dpm_state; | 
|  | int			vdd; | 
|  | int			protect_card; | 
|  | int			reqs_blocked; | 
|  | int			use_reg; | 
|  | int			req_in_progress; | 
|  |  | 
|  | struct	omap_mmc_platform_data	*pdata; | 
|  | }; | 
|  |  | 
|  | static int omap_hsmmc_card_detect(struct device *dev, int slot) | 
|  | { | 
|  | struct omap_mmc_platform_data *mmc = dev->platform_data; | 
|  |  | 
|  | /* NOTE: assumes card detect signal is active-low */ | 
|  | return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_get_wp(struct device *dev, int slot) | 
|  | { | 
|  | struct omap_mmc_platform_data *mmc = dev->platform_data; | 
|  |  | 
|  | /* NOTE: assumes write protect signal is active-high */ | 
|  | return gpio_get_value_cansleep(mmc->slots[0].gpio_wp); | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_get_cover_state(struct device *dev, int slot) | 
|  | { | 
|  | struct omap_mmc_platform_data *mmc = dev->platform_data; | 
|  |  | 
|  | /* NOTE: assumes card detect signal is active-low */ | 
|  | return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot) | 
|  | { | 
|  | struct omap_mmc_platform_data *mmc = dev->platform_data; | 
|  |  | 
|  | disable_irq(mmc->slots[0].card_detect_irq); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_resume_cdirq(struct device *dev, int slot) | 
|  | { | 
|  | struct omap_mmc_platform_data *mmc = dev->platform_data; | 
|  |  | 
|  | enable_irq(mmc->slots[0].card_detect_irq); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | #define omap_hsmmc_suspend_cdirq	NULL | 
|  | #define omap_hsmmc_resume_cdirq		NULL | 
|  |  | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_REGULATOR | 
|  |  | 
|  | static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on, | 
|  | int vdd) | 
|  | { | 
|  | struct omap_hsmmc_host *host = | 
|  | platform_get_drvdata(to_platform_device(dev)); | 
|  | int ret; | 
|  |  | 
|  | if (mmc_slot(host).before_set_reg) | 
|  | mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); | 
|  |  | 
|  | if (power_on) | 
|  | ret = mmc_regulator_set_ocr(host->vcc, vdd); | 
|  | else | 
|  | ret = mmc_regulator_set_ocr(host->vcc, 0); | 
|  |  | 
|  | if (mmc_slot(host).after_set_reg) | 
|  | mmc_slot(host).after_set_reg(dev, slot, power_on, vdd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, | 
|  | int vdd) | 
|  | { | 
|  | struct omap_hsmmc_host *host = | 
|  | platform_get_drvdata(to_platform_device(dev)); | 
|  | int ret = 0; | 
|  |  | 
|  | /* | 
|  | * If we don't see a Vcc regulator, assume it's a fixed | 
|  | * voltage always-on regulator. | 
|  | */ | 
|  | if (!host->vcc) | 
|  | return 0; | 
|  |  | 
|  | if (mmc_slot(host).before_set_reg) | 
|  | mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); | 
|  |  | 
|  | /* | 
|  | * Assume Vcc regulator is used only to power the card ... OMAP | 
|  | * VDDS is used to power the pins, optionally with a transceiver to | 
|  | * support cards using voltages other than VDDS (1.8V nominal).  When a | 
|  | * transceiver is used, DAT3..7 are muxed as transceiver control pins. | 
|  | * | 
|  | * In some cases this regulator won't support enable/disable; | 
|  | * e.g. it's a fixed rail for a WLAN chip. | 
|  | * | 
|  | * In other cases vcc_aux switches interface power.  Example, for | 
|  | * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO | 
|  | * chips/cards need an interface voltage rail too. | 
|  | */ | 
|  | if (power_on) { | 
|  | ret = mmc_regulator_set_ocr(host->vcc, vdd); | 
|  | /* Enable interface voltage rail, if needed */ | 
|  | if (ret == 0 && host->vcc_aux) { | 
|  | ret = regulator_enable(host->vcc_aux); | 
|  | if (ret < 0) | 
|  | ret = mmc_regulator_set_ocr(host->vcc, 0); | 
|  | } | 
|  | } else { | 
|  | if (host->vcc_aux) | 
|  | ret = regulator_disable(host->vcc_aux); | 
|  | if (ret == 0) | 
|  | ret = mmc_regulator_set_ocr(host->vcc, 0); | 
|  | } | 
|  |  | 
|  | if (mmc_slot(host).after_set_reg) | 
|  | mmc_slot(host).after_set_reg(dev, slot, power_on, vdd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep, | 
|  | int vdd, int cardsleep) | 
|  | { | 
|  | struct omap_hsmmc_host *host = | 
|  | platform_get_drvdata(to_platform_device(dev)); | 
|  | int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; | 
|  |  | 
|  | return regulator_set_mode(host->vcc, mode); | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep, | 
|  | int vdd, int cardsleep) | 
|  | { | 
|  | struct omap_hsmmc_host *host = | 
|  | platform_get_drvdata(to_platform_device(dev)); | 
|  | int err, mode; | 
|  |  | 
|  | /* | 
|  | * If we don't see a Vcc regulator, assume it's a fixed | 
|  | * voltage always-on regulator. | 
|  | */ | 
|  | if (!host->vcc) | 
|  | return 0; | 
|  |  | 
|  | mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; | 
|  |  | 
|  | if (!host->vcc_aux) | 
|  | return regulator_set_mode(host->vcc, mode); | 
|  |  | 
|  | if (cardsleep) { | 
|  | /* VCC can be turned off if card is asleep */ | 
|  | if (sleep) | 
|  | err = mmc_regulator_set_ocr(host->vcc, 0); | 
|  | else | 
|  | err = mmc_regulator_set_ocr(host->vcc, vdd); | 
|  | } else | 
|  | err = regulator_set_mode(host->vcc, mode); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (!mmc_slot(host).vcc_aux_disable_is_sleep) | 
|  | return regulator_set_mode(host->vcc_aux, mode); | 
|  |  | 
|  | if (sleep) | 
|  | return regulator_disable(host->vcc_aux); | 
|  | else | 
|  | return regulator_enable(host->vcc_aux); | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) | 
|  | { | 
|  | struct regulator *reg; | 
|  | int ret = 0; | 
|  |  | 
|  | switch (host->id) { | 
|  | case OMAP_MMC1_DEVID: | 
|  | /* On-chip level shifting via PBIAS0/PBIAS1 */ | 
|  | mmc_slot(host).set_power = omap_hsmmc_1_set_power; | 
|  | mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep; | 
|  | break; | 
|  | case OMAP_MMC2_DEVID: | 
|  | case OMAP_MMC3_DEVID: | 
|  | /* Off-chip level shifting, or none */ | 
|  | mmc_slot(host).set_power = omap_hsmmc_23_set_power; | 
|  | mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep; | 
|  | break; | 
|  | default: | 
|  | pr_err("MMC%d configuration not supported!\n", host->id); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | reg = regulator_get(host->dev, "vmmc"); | 
|  | if (IS_ERR(reg)) { | 
|  | dev_dbg(host->dev, "vmmc regulator missing\n"); | 
|  | /* | 
|  | * HACK: until fixed.c regulator is usable, | 
|  | * we don't require a main regulator | 
|  | * for MMC2 or MMC3 | 
|  | */ | 
|  | if (host->id == OMAP_MMC1_DEVID) { | 
|  | ret = PTR_ERR(reg); | 
|  | goto err; | 
|  | } | 
|  | } else { | 
|  | host->vcc = reg; | 
|  | mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); | 
|  |  | 
|  | /* Allow an aux regulator */ | 
|  | reg = regulator_get(host->dev, "vmmc_aux"); | 
|  | host->vcc_aux = IS_ERR(reg) ? NULL : reg; | 
|  |  | 
|  | /* | 
|  | * UGLY HACK:  workaround regulator framework bugs. | 
|  | * When the bootloader leaves a supply active, it's | 
|  | * initialized with zero usecount ... and we can't | 
|  | * disable it without first enabling it.  Until the | 
|  | * framework is fixed, we need a workaround like this | 
|  | * (which is safe for MMC, but not in general). | 
|  | */ | 
|  | if (regulator_is_enabled(host->vcc) > 0) { | 
|  | regulator_enable(host->vcc); | 
|  | regulator_disable(host->vcc); | 
|  | } | 
|  | if (host->vcc_aux) { | 
|  | if (regulator_is_enabled(reg) > 0) { | 
|  | regulator_enable(reg); | 
|  | regulator_disable(reg); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | mmc_slot(host).set_power = NULL; | 
|  | mmc_slot(host).set_sleep = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host) | 
|  | { | 
|  | regulator_put(host->vcc); | 
|  | regulator_put(host->vcc_aux); | 
|  | mmc_slot(host).set_power = NULL; | 
|  | mmc_slot(host).set_sleep = NULL; | 
|  | } | 
|  |  | 
|  | static inline int omap_hsmmc_have_reg(void) | 
|  | { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static inline int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) | 
|  | { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static inline void omap_hsmmc_reg_put(struct omap_hsmmc_host *host) | 
|  | { | 
|  | } | 
|  |  | 
|  | static inline int omap_hsmmc_have_reg(void) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (gpio_is_valid(pdata->slots[0].switch_pin)) { | 
|  | pdata->suspend = omap_hsmmc_suspend_cdirq; | 
|  | pdata->resume = omap_hsmmc_resume_cdirq; | 
|  | if (pdata->slots[0].cover) | 
|  | pdata->slots[0].get_cover_state = | 
|  | omap_hsmmc_get_cover_state; | 
|  | else | 
|  | pdata->slots[0].card_detect = omap_hsmmc_card_detect; | 
|  | pdata->slots[0].card_detect_irq = | 
|  | gpio_to_irq(pdata->slots[0].switch_pin); | 
|  | ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd"); | 
|  | if (ret) | 
|  | return ret; | 
|  | ret = gpio_direction_input(pdata->slots[0].switch_pin); | 
|  | if (ret) | 
|  | goto err_free_sp; | 
|  | } else | 
|  | pdata->slots[0].switch_pin = -EINVAL; | 
|  |  | 
|  | if (gpio_is_valid(pdata->slots[0].gpio_wp)) { | 
|  | pdata->slots[0].get_ro = omap_hsmmc_get_wp; | 
|  | ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp"); | 
|  | if (ret) | 
|  | goto err_free_cd; | 
|  | ret = gpio_direction_input(pdata->slots[0].gpio_wp); | 
|  | if (ret) | 
|  | goto err_free_wp; | 
|  | } else | 
|  | pdata->slots[0].gpio_wp = -EINVAL; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_wp: | 
|  | gpio_free(pdata->slots[0].gpio_wp); | 
|  | err_free_cd: | 
|  | if (gpio_is_valid(pdata->slots[0].switch_pin)) | 
|  | err_free_sp: | 
|  | gpio_free(pdata->slots[0].switch_pin); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata) | 
|  | { | 
|  | if (gpio_is_valid(pdata->slots[0].gpio_wp)) | 
|  | gpio_free(pdata->slots[0].gpio_wp); | 
|  | if (gpio_is_valid(pdata->slots[0].switch_pin)) | 
|  | gpio_free(pdata->slots[0].switch_pin); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Stop clock to the card | 
|  | */ | 
|  | static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) | 
|  | { | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); | 
|  | if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) | 
|  | dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host) | 
|  | { | 
|  | unsigned int irq_mask; | 
|  |  | 
|  | if (host->use_dma) | 
|  | irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE); | 
|  | else | 
|  | irq_mask = INT_EN_MASK; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); | 
|  | OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); | 
|  | OMAP_HSMMC_WRITE(host->base, IE, irq_mask); | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host) | 
|  | { | 
|  | OMAP_HSMMC_WRITE(host->base, ISE, 0); | 
|  | OMAP_HSMMC_WRITE(host->base, IE, 0); | 
|  | OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | /* | 
|  | * Restore the MMC host context, if it was lost as result of a | 
|  | * power state change. | 
|  | */ | 
|  | static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) | 
|  | { | 
|  | struct mmc_ios *ios = &host->mmc->ios; | 
|  | struct omap_mmc_platform_data *pdata = host->pdata; | 
|  | int context_loss = 0; | 
|  | u32 hctl, capa, con; | 
|  | u16 dsor = 0; | 
|  | unsigned long timeout; | 
|  |  | 
|  | if (pdata->get_context_loss_count) { | 
|  | context_loss = pdata->get_context_loss_count(host->dev); | 
|  | if (context_loss < 0) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "context was %slost\n", | 
|  | context_loss == host->context_loss ? "not " : ""); | 
|  | if (host->context_loss == context_loss) | 
|  | return 1; | 
|  |  | 
|  | /* Wait for hardware reset */ | 
|  | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | 
|  | while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE | 
|  | && time_before(jiffies, timeout)) | 
|  | ; | 
|  |  | 
|  | /* Do software reset */ | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCONFIG, SOFTRESET); | 
|  | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | 
|  | while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE | 
|  | && time_before(jiffies, timeout)) | 
|  | ; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCONFIG, | 
|  | OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); | 
|  |  | 
|  | if (host->id == OMAP_MMC1_DEVID) { | 
|  | if (host->power_mode != MMC_POWER_OFF && | 
|  | (1 << ios->vdd) <= MMC_VDD_23_24) | 
|  | hctl = SDVS18; | 
|  | else | 
|  | hctl = SDVS30; | 
|  | capa = VS30 | VS18; | 
|  | } else { | 
|  | hctl = SDVS18; | 
|  | capa = VS18; | 
|  | } | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) | hctl); | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, CAPA, | 
|  | OMAP_HSMMC_READ(host->base, CAPA) | capa); | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) | SDBP); | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | 
|  | while ((OMAP_HSMMC_READ(host->base, HCTL) & SDBP) != SDBP | 
|  | && time_before(jiffies, timeout)) | 
|  | ; | 
|  |  | 
|  | omap_hsmmc_disable_irq(host); | 
|  |  | 
|  | /* Do not initialize card-specific things if the power is off */ | 
|  | if (host->power_mode == MMC_POWER_OFF) | 
|  | goto out; | 
|  |  | 
|  | con = OMAP_HSMMC_READ(host->base, CON); | 
|  | switch (ios->bus_width) { | 
|  | case MMC_BUS_WIDTH_8: | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con | DW8); | 
|  | break; | 
|  | case MMC_BUS_WIDTH_4: | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); | 
|  | break; | 
|  | case MMC_BUS_WIDTH_1: | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ios->clock) { | 
|  | dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; | 
|  | if (dsor < 1) | 
|  | dsor = 1; | 
|  |  | 
|  | if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) | 
|  | dsor++; | 
|  |  | 
|  | if (dsor > 250) | 
|  | dsor = 250; | 
|  | } | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, (dsor << 6) | (DTO << 16)); | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | 
|  | while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS | 
|  | && time_before(jiffies, timeout)) | 
|  | ; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); | 
|  |  | 
|  | con = OMAP_HSMMC_READ(host->base, CON); | 
|  | if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con | OD); | 
|  | else | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con & ~OD); | 
|  | out: | 
|  | host->context_loss = context_loss; | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "context is restored\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Save the MMC host context (store the number of power state changes so far). | 
|  | */ | 
|  | static void omap_hsmmc_context_save(struct omap_hsmmc_host *host) | 
|  | { | 
|  | struct omap_mmc_platform_data *pdata = host->pdata; | 
|  | int context_loss; | 
|  |  | 
|  | if (pdata->get_context_loss_count) { | 
|  | context_loss = pdata->get_context_loss_count(host->dev); | 
|  | if (context_loss < 0) | 
|  | return; | 
|  | host->context_loss = context_loss; | 
|  | } | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_context_save(struct omap_hsmmc_host *host) | 
|  | { | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Send init stream sequence to card | 
|  | * before sending IDLE command | 
|  | */ | 
|  | static void send_init_stream(struct omap_hsmmc_host *host) | 
|  | { | 
|  | int reg = 0; | 
|  | unsigned long timeout; | 
|  |  | 
|  | if (host->protect_card) | 
|  | return; | 
|  |  | 
|  | disable_irq(host->irq); | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); | 
|  | OMAP_HSMMC_WRITE(host->base, CON, | 
|  | OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM); | 
|  | OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | 
|  | while ((reg != CC) && time_before(jiffies, timeout)) | 
|  | reg = OMAP_HSMMC_READ(host->base, STAT) & CC; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, CON, | 
|  | OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); | 
|  | OMAP_HSMMC_READ(host->base, STAT); | 
|  |  | 
|  | enable_irq(host->irq); | 
|  | } | 
|  |  | 
|  | static inline | 
|  | int omap_hsmmc_cover_is_closed(struct omap_hsmmc_host *host) | 
|  | { | 
|  | int r = 1; | 
|  |  | 
|  | if (mmc_slot(host).get_cover_state) | 
|  | r = mmc_slot(host).get_cover_state(host->dev, host->slot_id); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | omap_hsmmc_show_cover_switch(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  |  | 
|  | return sprintf(buf, "%s\n", | 
|  | omap_hsmmc_cover_is_closed(host) ? "closed" : "open"); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(cover_switch, S_IRUGO, omap_hsmmc_show_cover_switch, NULL); | 
|  |  | 
|  | static ssize_t | 
|  | omap_hsmmc_show_slot_name(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  |  | 
|  | return sprintf(buf, "%s\n", mmc_slot(host).name); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL); | 
|  |  | 
|  | /* | 
|  | * Configure the response type and send the cmd. | 
|  | */ | 
|  | static void | 
|  | omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, | 
|  | struct mmc_data *data) | 
|  | { | 
|  | int cmdreg = 0, resptype = 0, cmdtype = 0; | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", | 
|  | mmc_hostname(host->mmc), cmd->opcode, cmd->arg); | 
|  | host->cmd = cmd; | 
|  |  | 
|  | omap_hsmmc_enable_irq(host); | 
|  |  | 
|  | host->response_busy = 0; | 
|  | if (cmd->flags & MMC_RSP_PRESENT) { | 
|  | if (cmd->flags & MMC_RSP_136) | 
|  | resptype = 1; | 
|  | else if (cmd->flags & MMC_RSP_BUSY) { | 
|  | resptype = 3; | 
|  | host->response_busy = 1; | 
|  | } else | 
|  | resptype = 2; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Unlike OMAP1 controller, the cmdtype does not seem to be based on | 
|  | * ac, bc, adtc, bcr. Only commands ending an open ended transfer need | 
|  | * a val of 0x3, rest 0x0. | 
|  | */ | 
|  | if (cmd == host->mrq->stop) | 
|  | cmdtype = 0x3; | 
|  |  | 
|  | cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); | 
|  |  | 
|  | if (data) { | 
|  | cmdreg |= DP_SELECT | MSBS | BCE; | 
|  | if (data->flags & MMC_DATA_READ) | 
|  | cmdreg |= DDIR; | 
|  | else | 
|  | cmdreg &= ~(DDIR); | 
|  | } | 
|  |  | 
|  | if (host->use_dma) | 
|  | cmdreg |= DMA_EN; | 
|  |  | 
|  | host->req_in_progress = 1; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); | 
|  | OMAP_HSMMC_WRITE(host->base, CMD, cmdreg); | 
|  | } | 
|  |  | 
|  | static int | 
|  | omap_hsmmc_get_dma_dir(struct omap_hsmmc_host *host, struct mmc_data *data) | 
|  | { | 
|  | if (data->flags & MMC_DATA_WRITE) | 
|  | return DMA_TO_DEVICE; | 
|  | else | 
|  | return DMA_FROM_DEVICE; | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq) | 
|  | { | 
|  | int dma_ch; | 
|  |  | 
|  | spin_lock(&host->irq_lock); | 
|  | host->req_in_progress = 0; | 
|  | dma_ch = host->dma_ch; | 
|  | spin_unlock(&host->irq_lock); | 
|  |  | 
|  | omap_hsmmc_disable_irq(host); | 
|  | /* Do not complete the request if DMA is still in progress */ | 
|  | if (mrq->data && host->use_dma && dma_ch != -1) | 
|  | return; | 
|  | host->mrq = NULL; | 
|  | mmc_request_done(host->mmc, mrq); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Notify the transfer complete to MMC core | 
|  | */ | 
|  | static void | 
|  | omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data) | 
|  | { | 
|  | if (!data) { | 
|  | struct mmc_request *mrq = host->mrq; | 
|  |  | 
|  | /* TC before CC from CMD6 - don't know why, but it happens */ | 
|  | if (host->cmd && host->cmd->opcode == 6 && | 
|  | host->response_busy) { | 
|  | host->response_busy = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | omap_hsmmc_request_done(host, mrq); | 
|  | return; | 
|  | } | 
|  |  | 
|  | host->data = NULL; | 
|  |  | 
|  | if (!data->error) | 
|  | data->bytes_xfered += data->blocks * (data->blksz); | 
|  | else | 
|  | data->bytes_xfered = 0; | 
|  |  | 
|  | if (!data->stop) { | 
|  | omap_hsmmc_request_done(host, data->mrq); | 
|  | return; | 
|  | } | 
|  | omap_hsmmc_start_command(host, data->stop, NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Notify the core about command completion | 
|  | */ | 
|  | static void | 
|  | omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) | 
|  | { | 
|  | host->cmd = NULL; | 
|  |  | 
|  | if (cmd->flags & MMC_RSP_PRESENT) { | 
|  | if (cmd->flags & MMC_RSP_136) { | 
|  | /* response type 2 */ | 
|  | cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10); | 
|  | cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32); | 
|  | cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54); | 
|  | cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76); | 
|  | } else { | 
|  | /* response types 1, 1b, 3, 4, 5, 6 */ | 
|  | cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); | 
|  | } | 
|  | } | 
|  | if ((host->data == NULL && !host->response_busy) || cmd->error) | 
|  | omap_hsmmc_request_done(host, cmd->mrq); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * DMA clean up for command errors | 
|  | */ | 
|  | static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) | 
|  | { | 
|  | int dma_ch; | 
|  |  | 
|  | host->data->error = errno; | 
|  |  | 
|  | spin_lock(&host->irq_lock); | 
|  | dma_ch = host->dma_ch; | 
|  | host->dma_ch = -1; | 
|  | spin_unlock(&host->irq_lock); | 
|  |  | 
|  | if (host->use_dma && dma_ch != -1) { | 
|  | dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, | 
|  | omap_hsmmc_get_dma_dir(host, host->data)); | 
|  | omap_free_dma(dma_ch); | 
|  | } | 
|  | host->data = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Readable error output | 
|  | */ | 
|  | #ifdef CONFIG_MMC_DEBUG | 
|  | static void omap_hsmmc_report_irq(struct omap_hsmmc_host *host, u32 status) | 
|  | { | 
|  | /* --- means reserved bit without definition at documentation */ | 
|  | static const char *omap_hsmmc_status_bits[] = { | 
|  | "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", | 
|  | "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", | 
|  | "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", | 
|  | "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" | 
|  | }; | 
|  | char res[256]; | 
|  | char *buf = res; | 
|  | int len, i; | 
|  |  | 
|  | len = sprintf(buf, "MMC IRQ 0x%x :", status); | 
|  | buf += len; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(omap_hsmmc_status_bits); i++) | 
|  | if (status & (1 << i)) { | 
|  | len = sprintf(buf, " %s", omap_hsmmc_status_bits[i]); | 
|  | buf += len; | 
|  | } | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "%s\n", res); | 
|  | } | 
|  | #endif  /* CONFIG_MMC_DEBUG */ | 
|  |  | 
|  | /* | 
|  | * MMC controller internal state machines reset | 
|  | * | 
|  | * Used to reset command or data internal state machines, using respectively | 
|  | *  SRC or SRD bit of SYSCTL register | 
|  | * Can be called from interrupt context | 
|  | */ | 
|  | static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, | 
|  | unsigned long bit) | 
|  | { | 
|  | unsigned long i = 0; | 
|  | unsigned long limit = (loops_per_jiffy * | 
|  | msecs_to_jiffies(MMC_TIMEOUT_MS)); | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL) | bit); | 
|  |  | 
|  | while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && | 
|  | (i++ < limit)) | 
|  | cpu_relax(); | 
|  |  | 
|  | if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) | 
|  | dev_err(mmc_dev(host->mmc), | 
|  | "Timeout waiting on controller reset in %s\n", | 
|  | __func__); | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) | 
|  | { | 
|  | struct mmc_data *data; | 
|  | int end_cmd = 0, end_trans = 0; | 
|  |  | 
|  | if (!host->req_in_progress) { | 
|  | do { | 
|  | OMAP_HSMMC_WRITE(host->base, STAT, status); | 
|  | /* Flush posted write */ | 
|  | status = OMAP_HSMMC_READ(host->base, STAT); | 
|  | } while (status & INT_EN_MASK); | 
|  | return; | 
|  | } | 
|  |  | 
|  | data = host->data; | 
|  | dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); | 
|  |  | 
|  | if (status & ERR) { | 
|  | #ifdef CONFIG_MMC_DEBUG | 
|  | omap_hsmmc_report_irq(host, status); | 
|  | #endif | 
|  | if ((status & CMD_TIMEOUT) || | 
|  | (status & CMD_CRC)) { | 
|  | if (host->cmd) { | 
|  | if (status & CMD_TIMEOUT) { | 
|  | omap_hsmmc_reset_controller_fsm(host, | 
|  | SRC); | 
|  | host->cmd->error = -ETIMEDOUT; | 
|  | } else { | 
|  | host->cmd->error = -EILSEQ; | 
|  | } | 
|  | end_cmd = 1; | 
|  | } | 
|  | if (host->data || host->response_busy) { | 
|  | if (host->data) | 
|  | omap_hsmmc_dma_cleanup(host, | 
|  | -ETIMEDOUT); | 
|  | host->response_busy = 0; | 
|  | omap_hsmmc_reset_controller_fsm(host, SRD); | 
|  | } | 
|  | } | 
|  | if ((status & DATA_TIMEOUT) || | 
|  | (status & DATA_CRC)) { | 
|  | if (host->data || host->response_busy) { | 
|  | int err = (status & DATA_TIMEOUT) ? | 
|  | -ETIMEDOUT : -EILSEQ; | 
|  |  | 
|  | if (host->data) | 
|  | omap_hsmmc_dma_cleanup(host, err); | 
|  | else | 
|  | host->mrq->cmd->error = err; | 
|  | host->response_busy = 0; | 
|  | omap_hsmmc_reset_controller_fsm(host, SRD); | 
|  | end_trans = 1; | 
|  | } | 
|  | } | 
|  | if (status & CARD_ERR) { | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Ignoring card err CMD%d\n", host->cmd->opcode); | 
|  | if (host->cmd) | 
|  | end_cmd = 1; | 
|  | if (host->data) | 
|  | end_trans = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, STAT, status); | 
|  |  | 
|  | if (end_cmd || ((status & CC) && host->cmd)) | 
|  | omap_hsmmc_cmd_done(host, host->cmd); | 
|  | if ((end_trans || (status & TC)) && host->mrq) | 
|  | omap_hsmmc_xfer_done(host, data); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * MMC controller IRQ handler | 
|  | */ | 
|  | static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) | 
|  | { | 
|  | struct omap_hsmmc_host *host = dev_id; | 
|  | int status; | 
|  |  | 
|  | status = OMAP_HSMMC_READ(host->base, STAT); | 
|  | do { | 
|  | omap_hsmmc_do_irq(host, status); | 
|  | /* Flush posted write */ | 
|  | status = OMAP_HSMMC_READ(host->base, STAT); | 
|  | } while (status & INT_EN_MASK); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void set_sd_bus_power(struct omap_hsmmc_host *host) | 
|  | { | 
|  | unsigned long i; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) | SDBP); | 
|  | for (i = 0; i < loops_per_jiffy; i++) { | 
|  | if (OMAP_HSMMC_READ(host->base, HCTL) & SDBP) | 
|  | break; | 
|  | cpu_relax(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Switch MMC interface voltage ... only relevant for MMC1. | 
|  | * | 
|  | * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. | 
|  | * The MMC2 transceiver controls are used instead of DAT4..DAT7. | 
|  | * Some chips, like eMMC ones, use internal transceivers. | 
|  | */ | 
|  | static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) | 
|  | { | 
|  | u32 reg_val = 0; | 
|  | int ret; | 
|  |  | 
|  | /* Disable the clocks */ | 
|  | clk_disable(host->fclk); | 
|  | clk_disable(host->iclk); | 
|  | if (host->got_dbclk) | 
|  | clk_disable(host->dbclk); | 
|  |  | 
|  | /* Turn the power off */ | 
|  | ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); | 
|  |  | 
|  | /* Turn the power ON with given VDD 1.8 or 3.0v */ | 
|  | if (!ret) | 
|  | ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, | 
|  | vdd); | 
|  | clk_enable(host->iclk); | 
|  | clk_enable(host->fclk); | 
|  | if (host->got_dbclk) | 
|  | clk_enable(host->dbclk); | 
|  |  | 
|  | if (ret != 0) | 
|  | goto err; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); | 
|  | reg_val = OMAP_HSMMC_READ(host->base, HCTL); | 
|  |  | 
|  | /* | 
|  | * If a MMC dual voltage card is detected, the set_ios fn calls | 
|  | * this fn with VDD bit set for 1.8V. Upon card removal from the | 
|  | * slot, omap_hsmmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. | 
|  | * | 
|  | * Cope with a bit of slop in the range ... per data sheets: | 
|  | *  - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, | 
|  | *    but recommended values are 1.71V to 1.89V | 
|  | *  - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, | 
|  | *    but recommended values are 2.7V to 3.3V | 
|  | * | 
|  | * Board setup code shouldn't permit anything very out-of-range. | 
|  | * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the | 
|  | * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. | 
|  | */ | 
|  | if ((1 << vdd) <= MMC_VDD_23_24) | 
|  | reg_val |= SDVS18; | 
|  | else | 
|  | reg_val |= SDVS30; | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); | 
|  | set_sd_bus_power(host); | 
|  |  | 
|  | return 0; | 
|  | err: | 
|  | dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Protect the card while the cover is open */ | 
|  | static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host) | 
|  | { | 
|  | if (!mmc_slot(host).get_cover_state) | 
|  | return; | 
|  |  | 
|  | host->reqs_blocked = 0; | 
|  | if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) { | 
|  | if (host->protect_card) { | 
|  | printk(KERN_INFO "%s: cover is closed, " | 
|  | "card is now accessible\n", | 
|  | mmc_hostname(host->mmc)); | 
|  | host->protect_card = 0; | 
|  | } | 
|  | } else { | 
|  | if (!host->protect_card) { | 
|  | printk(KERN_INFO "%s: cover is open, " | 
|  | "card is now inaccessible\n", | 
|  | mmc_hostname(host->mmc)); | 
|  | host->protect_card = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Work Item to notify the core about card insertion/removal | 
|  | */ | 
|  | static void omap_hsmmc_detect(struct work_struct *work) | 
|  | { | 
|  | struct omap_hsmmc_host *host = | 
|  | container_of(work, struct omap_hsmmc_host, mmc_carddetect_work); | 
|  | struct omap_mmc_slot_data *slot = &mmc_slot(host); | 
|  | int carddetect; | 
|  |  | 
|  | if (host->suspended) | 
|  | return; | 
|  |  | 
|  | sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); | 
|  |  | 
|  | if (slot->card_detect) | 
|  | carddetect = slot->card_detect(host->dev, host->slot_id); | 
|  | else { | 
|  | omap_hsmmc_protect_card(host); | 
|  | carddetect = -ENOSYS; | 
|  | } | 
|  |  | 
|  | if (carddetect) | 
|  | mmc_detect_change(host->mmc, (HZ * 200) / 1000); | 
|  | else | 
|  | mmc_detect_change(host->mmc, (HZ * 50) / 1000); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ISR for handling card insertion and removal | 
|  | */ | 
|  | static irqreturn_t omap_hsmmc_cd_handler(int irq, void *dev_id) | 
|  | { | 
|  | struct omap_hsmmc_host *host = (struct omap_hsmmc_host *)dev_id; | 
|  |  | 
|  | if (host->suspended) | 
|  | return IRQ_HANDLED; | 
|  | schedule_work(&host->mmc_carddetect_work); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_get_dma_sync_dev(struct omap_hsmmc_host *host, | 
|  | struct mmc_data *data) | 
|  | { | 
|  | int sync_dev; | 
|  |  | 
|  | if (data->flags & MMC_DATA_WRITE) | 
|  | sync_dev = host->dma_line_tx; | 
|  | else | 
|  | sync_dev = host->dma_line_rx; | 
|  | return sync_dev; | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_config_dma_params(struct omap_hsmmc_host *host, | 
|  | struct mmc_data *data, | 
|  | struct scatterlist *sgl) | 
|  | { | 
|  | int blksz, nblk, dma_ch; | 
|  |  | 
|  | dma_ch = host->dma_ch; | 
|  | if (data->flags & MMC_DATA_WRITE) { | 
|  | omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, | 
|  | (host->mapbase + OMAP_HSMMC_DATA), 0, 0); | 
|  | omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, | 
|  | sg_dma_address(sgl), 0, 0); | 
|  | } else { | 
|  | omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, | 
|  | (host->mapbase + OMAP_HSMMC_DATA), 0, 0); | 
|  | omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, | 
|  | sg_dma_address(sgl), 0, 0); | 
|  | } | 
|  |  | 
|  | blksz = host->data->blksz; | 
|  | nblk = sg_dma_len(sgl) / blksz; | 
|  |  | 
|  | omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, | 
|  | blksz / 4, nblk, OMAP_DMA_SYNC_FRAME, | 
|  | omap_hsmmc_get_dma_sync_dev(host, data), | 
|  | !(data->flags & MMC_DATA_WRITE)); | 
|  |  | 
|  | omap_start_dma(dma_ch); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * DMA call back function | 
|  | */ | 
|  | static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) | 
|  | { | 
|  | struct omap_hsmmc_host *host = cb_data; | 
|  | struct mmc_data *data = host->mrq->data; | 
|  | int dma_ch, req_in_progress; | 
|  |  | 
|  | if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ) | 
|  | dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n"); | 
|  |  | 
|  | spin_lock(&host->irq_lock); | 
|  | if (host->dma_ch < 0) { | 
|  | spin_unlock(&host->irq_lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | host->dma_sg_idx++; | 
|  | if (host->dma_sg_idx < host->dma_len) { | 
|  | /* Fire up the next transfer. */ | 
|  | omap_hsmmc_config_dma_params(host, data, | 
|  | data->sg + host->dma_sg_idx); | 
|  | spin_unlock(&host->irq_lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, | 
|  | omap_hsmmc_get_dma_dir(host, data)); | 
|  |  | 
|  | req_in_progress = host->req_in_progress; | 
|  | dma_ch = host->dma_ch; | 
|  | host->dma_ch = -1; | 
|  | spin_unlock(&host->irq_lock); | 
|  |  | 
|  | omap_free_dma(dma_ch); | 
|  |  | 
|  | /* If DMA has finished after TC, complete the request */ | 
|  | if (!req_in_progress) { | 
|  | struct mmc_request *mrq = host->mrq; | 
|  |  | 
|  | host->mrq = NULL; | 
|  | mmc_request_done(host->mmc, mrq); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Routine to configure and start DMA for the MMC card | 
|  | */ | 
|  | static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host, | 
|  | struct mmc_request *req) | 
|  | { | 
|  | int dma_ch = 0, ret = 0, i; | 
|  | struct mmc_data *data = req->data; | 
|  |  | 
|  | /* Sanity check: all the SG entries must be aligned by block size. */ | 
|  | for (i = 0; i < data->sg_len; i++) { | 
|  | struct scatterlist *sgl; | 
|  |  | 
|  | sgl = data->sg + i; | 
|  | if (sgl->length % data->blksz) | 
|  | return -EINVAL; | 
|  | } | 
|  | if ((data->blksz % 4) != 0) | 
|  | /* REVISIT: The MMC buffer increments only when MSB is written. | 
|  | * Return error for blksz which is non multiple of four. | 
|  | */ | 
|  | return -EINVAL; | 
|  |  | 
|  | BUG_ON(host->dma_ch != -1); | 
|  |  | 
|  | ret = omap_request_dma(omap_hsmmc_get_dma_sync_dev(host, data), | 
|  | "MMC/SD", omap_hsmmc_dma_cb, host, &dma_ch); | 
|  | if (ret != 0) { | 
|  | dev_err(mmc_dev(host->mmc), | 
|  | "%s: omap_request_dma() failed with %d\n", | 
|  | mmc_hostname(host->mmc), ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, | 
|  | data->sg_len, omap_hsmmc_get_dma_dir(host, data)); | 
|  | host->dma_ch = dma_ch; | 
|  | host->dma_sg_idx = 0; | 
|  |  | 
|  | omap_hsmmc_config_dma_params(host, data, data->sg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void set_data_timeout(struct omap_hsmmc_host *host, | 
|  | unsigned int timeout_ns, | 
|  | unsigned int timeout_clks) | 
|  | { | 
|  | unsigned int timeout, cycle_ns; | 
|  | uint32_t reg, clkd, dto = 0; | 
|  |  | 
|  | reg = OMAP_HSMMC_READ(host->base, SYSCTL); | 
|  | clkd = (reg & CLKD_MASK) >> CLKD_SHIFT; | 
|  | if (clkd == 0) | 
|  | clkd = 1; | 
|  |  | 
|  | cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); | 
|  | timeout = timeout_ns / cycle_ns; | 
|  | timeout += timeout_clks; | 
|  | if (timeout) { | 
|  | while ((timeout & 0x80000000) == 0) { | 
|  | dto += 1; | 
|  | timeout <<= 1; | 
|  | } | 
|  | dto = 31 - dto; | 
|  | timeout <<= 1; | 
|  | if (timeout && dto) | 
|  | dto += 1; | 
|  | if (dto >= 13) | 
|  | dto -= 13; | 
|  | else | 
|  | dto = 0; | 
|  | if (dto > 14) | 
|  | dto = 14; | 
|  | } | 
|  |  | 
|  | reg &= ~DTO_MASK; | 
|  | reg |= dto << DTO_SHIFT; | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Configure block length for MMC/SD cards and initiate the transfer. | 
|  | */ | 
|  | static int | 
|  | omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req) | 
|  | { | 
|  | int ret; | 
|  | host->data = req->data; | 
|  |  | 
|  | if (req->data == NULL) { | 
|  | OMAP_HSMMC_WRITE(host->base, BLK, 0); | 
|  | /* | 
|  | * Set an arbitrary 100ms data timeout for commands with | 
|  | * busy signal. | 
|  | */ | 
|  | if (req->cmd->flags & MMC_RSP_BUSY) | 
|  | set_data_timeout(host, 100000000U, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) | 
|  | | (req->data->blocks << 16)); | 
|  | set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks); | 
|  |  | 
|  | if (host->use_dma) { | 
|  | ret = omap_hsmmc_start_dma_transfer(host, req); | 
|  | if (ret != 0) { | 
|  | dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Request function. for read/write operation | 
|  | */ | 
|  | static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  | int err; | 
|  |  | 
|  | BUG_ON(host->req_in_progress); | 
|  | BUG_ON(host->dma_ch != -1); | 
|  | if (host->protect_card) { | 
|  | if (host->reqs_blocked < 3) { | 
|  | /* | 
|  | * Ensure the controller is left in a consistent | 
|  | * state by resetting the command and data state | 
|  | * machines. | 
|  | */ | 
|  | omap_hsmmc_reset_controller_fsm(host, SRD); | 
|  | omap_hsmmc_reset_controller_fsm(host, SRC); | 
|  | host->reqs_blocked += 1; | 
|  | } | 
|  | req->cmd->error = -EBADF; | 
|  | if (req->data) | 
|  | req->data->error = -EBADF; | 
|  | req->cmd->retries = 0; | 
|  | mmc_request_done(mmc, req); | 
|  | return; | 
|  | } else if (host->reqs_blocked) | 
|  | host->reqs_blocked = 0; | 
|  | WARN_ON(host->mrq != NULL); | 
|  | host->mrq = req; | 
|  | err = omap_hsmmc_prepare_data(host, req); | 
|  | if (err) { | 
|  | req->cmd->error = err; | 
|  | if (req->data) | 
|  | req->data->error = err; | 
|  | host->mrq = NULL; | 
|  | mmc_request_done(mmc, req); | 
|  | return; | 
|  | } | 
|  |  | 
|  | omap_hsmmc_start_command(host, req->cmd, req->data); | 
|  | } | 
|  |  | 
|  | /* Routine to configure clock values. Exposed API to core */ | 
|  | static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  | u16 dsor = 0; | 
|  | unsigned long regval; | 
|  | unsigned long timeout; | 
|  | u32 con; | 
|  | int do_send_init_stream = 0; | 
|  |  | 
|  | mmc_host_enable(host->mmc); | 
|  |  | 
|  | if (ios->power_mode != host->power_mode) { | 
|  | switch (ios->power_mode) { | 
|  | case MMC_POWER_OFF: | 
|  | mmc_slot(host).set_power(host->dev, host->slot_id, | 
|  | 0, 0); | 
|  | host->vdd = 0; | 
|  | break; | 
|  | case MMC_POWER_UP: | 
|  | mmc_slot(host).set_power(host->dev, host->slot_id, | 
|  | 1, ios->vdd); | 
|  | host->vdd = ios->vdd; | 
|  | break; | 
|  | case MMC_POWER_ON: | 
|  | do_send_init_stream = 1; | 
|  | break; | 
|  | } | 
|  | host->power_mode = ios->power_mode; | 
|  | } | 
|  |  | 
|  | /* FIXME: set registers based only on changes to ios */ | 
|  |  | 
|  | con = OMAP_HSMMC_READ(host->base, CON); | 
|  | switch (mmc->ios.bus_width) { | 
|  | case MMC_BUS_WIDTH_8: | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con | DW8); | 
|  | break; | 
|  | case MMC_BUS_WIDTH_4: | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); | 
|  | break; | 
|  | case MMC_BUS_WIDTH_1: | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (host->id == OMAP_MMC1_DEVID) { | 
|  | /* Only MMC1 can interface at 3V without some flavor | 
|  | * of external transceiver; but they all handle 1.8V. | 
|  | */ | 
|  | if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && | 
|  | (ios->vdd == DUAL_VOLT_OCR_BIT)) { | 
|  | /* | 
|  | * The mmc_select_voltage fn of the core does | 
|  | * not seem to set the power_mode to | 
|  | * MMC_POWER_UP upon recalculating the voltage. | 
|  | * vdd 1.8v. | 
|  | */ | 
|  | if (omap_hsmmc_switch_opcond(host, ios->vdd) != 0) | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Switch operation failed\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ios->clock) { | 
|  | dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; | 
|  | if (dsor < 1) | 
|  | dsor = 1; | 
|  |  | 
|  | if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) | 
|  | dsor++; | 
|  |  | 
|  | if (dsor > 250) | 
|  | dsor = 250; | 
|  | } | 
|  | omap_hsmmc_stop_clock(host); | 
|  | regval = OMAP_HSMMC_READ(host->base, SYSCTL); | 
|  | regval = regval & ~(CLKD_MASK); | 
|  | regval = regval | (dsor << 6) | (DTO << 16); | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); | 
|  |  | 
|  | /* Wait till the ICS bit is set */ | 
|  | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | 
|  | while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS | 
|  | && time_before(jiffies, timeout)) | 
|  | msleep(1); | 
|  |  | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCTL, | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); | 
|  |  | 
|  | if (do_send_init_stream) | 
|  | send_init_stream(host); | 
|  |  | 
|  | con = OMAP_HSMMC_READ(host->base, CON); | 
|  | if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con | OD); | 
|  | else | 
|  | OMAP_HSMMC_WRITE(host->base, CON, con & ~OD); | 
|  |  | 
|  | if (host->power_mode == MMC_POWER_OFF) | 
|  | mmc_host_disable(host->mmc); | 
|  | else | 
|  | mmc_host_lazy_disable(host->mmc); | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_get_cd(struct mmc_host *mmc) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  |  | 
|  | if (!mmc_slot(host).card_detect) | 
|  | return -ENOSYS; | 
|  | return mmc_slot(host).card_detect(host->dev, host->slot_id); | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_get_ro(struct mmc_host *mmc) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  |  | 
|  | if (!mmc_slot(host).get_ro) | 
|  | return -ENOSYS; | 
|  | return mmc_slot(host).get_ro(host->dev, 0); | 
|  | } | 
|  |  | 
|  | static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) | 
|  | { | 
|  | u32 hctl, capa, value; | 
|  |  | 
|  | /* Only MMC1 supports 3.0V */ | 
|  | if (host->id == OMAP_MMC1_DEVID) { | 
|  | hctl = SDVS30; | 
|  | capa = VS30 | VS18; | 
|  | } else { | 
|  | hctl = SDVS18; | 
|  | capa = VS18; | 
|  | } | 
|  |  | 
|  | value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK; | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl); | 
|  |  | 
|  | value = OMAP_HSMMC_READ(host->base, CAPA); | 
|  | OMAP_HSMMC_WRITE(host->base, CAPA, value | capa); | 
|  |  | 
|  | /* Set the controller to AUTO IDLE mode */ | 
|  | value = OMAP_HSMMC_READ(host->base, SYSCONFIG); | 
|  | OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE); | 
|  |  | 
|  | /* Set SD bus power bit */ | 
|  | set_sd_bus_power(host); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Dynamic power saving handling, FSM: | 
|  | *   ENABLED -> DISABLED -> CARDSLEEP / REGSLEEP -> OFF | 
|  | *     ^___________|          |                      | | 
|  | *     |______________________|______________________| | 
|  | * | 
|  | * ENABLED:   mmc host is fully functional | 
|  | * DISABLED:  fclk is off | 
|  | * CARDSLEEP: fclk is off, card is asleep, voltage regulator is asleep | 
|  | * REGSLEEP:  fclk is off, voltage regulator is asleep | 
|  | * OFF:       fclk is off, voltage regulator is off | 
|  | * | 
|  | * Transition handlers return the timeout for the next state transition | 
|  | * or negative error. | 
|  | */ | 
|  |  | 
|  | enum {ENABLED = 0, DISABLED, CARDSLEEP, REGSLEEP, OFF}; | 
|  |  | 
|  | /* Handler for [ENABLED -> DISABLED] transition */ | 
|  | static int omap_hsmmc_enabled_to_disabled(struct omap_hsmmc_host *host) | 
|  | { | 
|  | omap_hsmmc_context_save(host); | 
|  | clk_disable(host->fclk); | 
|  | host->dpm_state = DISABLED; | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "ENABLED -> DISABLED\n"); | 
|  |  | 
|  | if (host->power_mode == MMC_POWER_OFF) | 
|  | return 0; | 
|  |  | 
|  | return OMAP_MMC_SLEEP_TIMEOUT; | 
|  | } | 
|  |  | 
|  | /* Handler for [DISABLED -> REGSLEEP / CARDSLEEP] transition */ | 
|  | static int omap_hsmmc_disabled_to_sleep(struct omap_hsmmc_host *host) | 
|  | { | 
|  | int err, new_state; | 
|  |  | 
|  | if (!mmc_try_claim_host(host->mmc)) | 
|  | return 0; | 
|  |  | 
|  | clk_enable(host->fclk); | 
|  | omap_hsmmc_context_restore(host); | 
|  | if (mmc_card_can_sleep(host->mmc)) { | 
|  | err = mmc_card_sleep(host->mmc); | 
|  | if (err < 0) { | 
|  | clk_disable(host->fclk); | 
|  | mmc_release_host(host->mmc); | 
|  | return err; | 
|  | } | 
|  | new_state = CARDSLEEP; | 
|  | } else { | 
|  | new_state = REGSLEEP; | 
|  | } | 
|  | if (mmc_slot(host).set_sleep) | 
|  | mmc_slot(host).set_sleep(host->dev, host->slot_id, 1, 0, | 
|  | new_state == CARDSLEEP); | 
|  | /* FIXME: turn off bus power and perhaps interrupts too */ | 
|  | clk_disable(host->fclk); | 
|  | host->dpm_state = new_state; | 
|  |  | 
|  | mmc_release_host(host->mmc); | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "DISABLED -> %s\n", | 
|  | host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); | 
|  |  | 
|  | if (mmc_slot(host).no_off) | 
|  | return 0; | 
|  |  | 
|  | if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) || | 
|  | mmc_slot(host).card_detect || | 
|  | (mmc_slot(host).get_cover_state && | 
|  | mmc_slot(host).get_cover_state(host->dev, host->slot_id))) | 
|  | return OMAP_MMC_OFF_TIMEOUT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Handler for [REGSLEEP / CARDSLEEP -> OFF] transition */ | 
|  | static int omap_hsmmc_sleep_to_off(struct omap_hsmmc_host *host) | 
|  | { | 
|  | if (!mmc_try_claim_host(host->mmc)) | 
|  | return 0; | 
|  |  | 
|  | if (mmc_slot(host).no_off) | 
|  | return 0; | 
|  |  | 
|  | if (!((host->mmc->caps & MMC_CAP_NONREMOVABLE) || | 
|  | mmc_slot(host).card_detect || | 
|  | (mmc_slot(host).get_cover_state && | 
|  | mmc_slot(host).get_cover_state(host->dev, host->slot_id)))) { | 
|  | mmc_release_host(host->mmc); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); | 
|  | host->vdd = 0; | 
|  | host->power_mode = MMC_POWER_OFF; | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "%s -> OFF\n", | 
|  | host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); | 
|  |  | 
|  | host->dpm_state = OFF; | 
|  |  | 
|  | mmc_release_host(host->mmc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Handler for [DISABLED -> ENABLED] transition */ | 
|  | static int omap_hsmmc_disabled_to_enabled(struct omap_hsmmc_host *host) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = clk_enable(host->fclk); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | omap_hsmmc_context_restore(host); | 
|  | host->dpm_state = ENABLED; | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "DISABLED -> ENABLED\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Handler for [SLEEP -> ENABLED] transition */ | 
|  | static int omap_hsmmc_sleep_to_enabled(struct omap_hsmmc_host *host) | 
|  | { | 
|  | if (!mmc_try_claim_host(host->mmc)) | 
|  | return 0; | 
|  |  | 
|  | clk_enable(host->fclk); | 
|  | omap_hsmmc_context_restore(host); | 
|  | if (mmc_slot(host).set_sleep) | 
|  | mmc_slot(host).set_sleep(host->dev, host->slot_id, 0, | 
|  | host->vdd, host->dpm_state == CARDSLEEP); | 
|  | if (mmc_card_can_sleep(host->mmc)) | 
|  | mmc_card_awake(host->mmc); | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "%s -> ENABLED\n", | 
|  | host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); | 
|  |  | 
|  | host->dpm_state = ENABLED; | 
|  |  | 
|  | mmc_release_host(host->mmc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Handler for [OFF -> ENABLED] transition */ | 
|  | static int omap_hsmmc_off_to_enabled(struct omap_hsmmc_host *host) | 
|  | { | 
|  | clk_enable(host->fclk); | 
|  |  | 
|  | omap_hsmmc_context_restore(host); | 
|  | omap_hsmmc_conf_bus_power(host); | 
|  | mmc_power_restore_host(host->mmc); | 
|  |  | 
|  | host->dpm_state = ENABLED; | 
|  |  | 
|  | dev_dbg(mmc_dev(host->mmc), "OFF -> ENABLED\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Bring MMC host to ENABLED from any other PM state. | 
|  | */ | 
|  | static int omap_hsmmc_enable(struct mmc_host *mmc) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  |  | 
|  | switch (host->dpm_state) { | 
|  | case DISABLED: | 
|  | return omap_hsmmc_disabled_to_enabled(host); | 
|  | case CARDSLEEP: | 
|  | case REGSLEEP: | 
|  | return omap_hsmmc_sleep_to_enabled(host); | 
|  | case OFF: | 
|  | return omap_hsmmc_off_to_enabled(host); | 
|  | default: | 
|  | dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Bring MMC host in PM state (one level deeper). | 
|  | */ | 
|  | static int omap_hsmmc_disable(struct mmc_host *mmc, int lazy) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  |  | 
|  | switch (host->dpm_state) { | 
|  | case ENABLED: { | 
|  | int delay; | 
|  |  | 
|  | delay = omap_hsmmc_enabled_to_disabled(host); | 
|  | if (lazy || delay < 0) | 
|  | return delay; | 
|  | return 0; | 
|  | } | 
|  | case DISABLED: | 
|  | return omap_hsmmc_disabled_to_sleep(host); | 
|  | case CARDSLEEP: | 
|  | case REGSLEEP: | 
|  | return omap_hsmmc_sleep_to_off(host); | 
|  | default: | 
|  | dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_enable_fclk(struct mmc_host *mmc) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  | int err; | 
|  |  | 
|  | err = clk_enable(host->fclk); | 
|  | if (err) | 
|  | return err; | 
|  | dev_dbg(mmc_dev(host->mmc), "mmc_fclk: enabled\n"); | 
|  | omap_hsmmc_context_restore(host); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_disable_fclk(struct mmc_host *mmc, int lazy) | 
|  | { | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  |  | 
|  | omap_hsmmc_context_save(host); | 
|  | clk_disable(host->fclk); | 
|  | dev_dbg(mmc_dev(host->mmc), "mmc_fclk: disabled\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct mmc_host_ops omap_hsmmc_ops = { | 
|  | .enable = omap_hsmmc_enable_fclk, | 
|  | .disable = omap_hsmmc_disable_fclk, | 
|  | .request = omap_hsmmc_request, | 
|  | .set_ios = omap_hsmmc_set_ios, | 
|  | .get_cd = omap_hsmmc_get_cd, | 
|  | .get_ro = omap_hsmmc_get_ro, | 
|  | /* NYET -- enable_sdio_irq */ | 
|  | }; | 
|  |  | 
|  | static const struct mmc_host_ops omap_hsmmc_ps_ops = { | 
|  | .enable = omap_hsmmc_enable, | 
|  | .disable = omap_hsmmc_disable, | 
|  | .request = omap_hsmmc_request, | 
|  | .set_ios = omap_hsmmc_set_ios, | 
|  | .get_cd = omap_hsmmc_get_cd, | 
|  | .get_ro = omap_hsmmc_get_ro, | 
|  | /* NYET -- enable_sdio_irq */ | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  |  | 
|  | static int omap_hsmmc_regs_show(struct seq_file *s, void *data) | 
|  | { | 
|  | struct mmc_host *mmc = s->private; | 
|  | struct omap_hsmmc_host *host = mmc_priv(mmc); | 
|  | int context_loss = 0; | 
|  |  | 
|  | if (host->pdata->get_context_loss_count) | 
|  | context_loss = host->pdata->get_context_loss_count(host->dev); | 
|  |  | 
|  | seq_printf(s, "mmc%d:\n" | 
|  | " enabled:\t%d\n" | 
|  | " dpm_state:\t%d\n" | 
|  | " nesting_cnt:\t%d\n" | 
|  | " ctx_loss:\t%d:%d\n" | 
|  | "\nregs:\n", | 
|  | mmc->index, mmc->enabled ? 1 : 0, | 
|  | host->dpm_state, mmc->nesting_cnt, | 
|  | host->context_loss, context_loss); | 
|  |  | 
|  | if (host->suspended || host->dpm_state == OFF) { | 
|  | seq_printf(s, "host suspended, can't read registers\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (clk_enable(host->fclk) != 0) { | 
|  | seq_printf(s, "can't read the regs\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | seq_printf(s, "SYSCONFIG:\t0x%08x\n", | 
|  | OMAP_HSMMC_READ(host->base, SYSCONFIG)); | 
|  | seq_printf(s, "CON:\t\t0x%08x\n", | 
|  | OMAP_HSMMC_READ(host->base, CON)); | 
|  | seq_printf(s, "HCTL:\t\t0x%08x\n", | 
|  | OMAP_HSMMC_READ(host->base, HCTL)); | 
|  | seq_printf(s, "SYSCTL:\t\t0x%08x\n", | 
|  | OMAP_HSMMC_READ(host->base, SYSCTL)); | 
|  | seq_printf(s, "IE:\t\t0x%08x\n", | 
|  | OMAP_HSMMC_READ(host->base, IE)); | 
|  | seq_printf(s, "ISE:\t\t0x%08x\n", | 
|  | OMAP_HSMMC_READ(host->base, ISE)); | 
|  | seq_printf(s, "CAPA:\t\t0x%08x\n", | 
|  | OMAP_HSMMC_READ(host->base, CAPA)); | 
|  |  | 
|  | clk_disable(host->fclk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_regs_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, omap_hsmmc_regs_show, inode->i_private); | 
|  | } | 
|  |  | 
|  | static const struct file_operations mmc_regs_fops = { | 
|  | .open           = omap_hsmmc_regs_open, | 
|  | .read           = seq_read, | 
|  | .llseek         = seq_lseek, | 
|  | .release        = single_release, | 
|  | }; | 
|  |  | 
|  | static void omap_hsmmc_debugfs(struct mmc_host *mmc) | 
|  | { | 
|  | if (mmc->debugfs_root) | 
|  | debugfs_create_file("regs", S_IRUSR, mmc->debugfs_root, | 
|  | mmc, &mmc_regs_fops); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static void omap_hsmmc_debugfs(struct mmc_host *mmc) | 
|  | { | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | static int __init omap_hsmmc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; | 
|  | struct mmc_host *mmc; | 
|  | struct omap_hsmmc_host *host = NULL; | 
|  | struct resource *res; | 
|  | int ret, irq; | 
|  |  | 
|  | if (pdata == NULL) { | 
|  | dev_err(&pdev->dev, "Platform Data is missing\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | if (pdata->nr_slots == 0) { | 
|  | dev_err(&pdev->dev, "No Slots\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (res == NULL || irq < 0) | 
|  | return -ENXIO; | 
|  |  | 
|  | res = request_mem_region(res->start, res->end - res->start + 1, | 
|  | pdev->name); | 
|  | if (res == NULL) | 
|  | return -EBUSY; | 
|  |  | 
|  | ret = omap_hsmmc_gpio_init(pdata); | 
|  | if (ret) | 
|  | goto err; | 
|  |  | 
|  | mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev); | 
|  | if (!mmc) { | 
|  | ret = -ENOMEM; | 
|  | goto err_alloc; | 
|  | } | 
|  |  | 
|  | host		= mmc_priv(mmc); | 
|  | host->mmc	= mmc; | 
|  | host->pdata	= pdata; | 
|  | host->dev	= &pdev->dev; | 
|  | host->use_dma	= 1; | 
|  | host->dev->dma_mask = &pdata->dma_mask; | 
|  | host->dma_ch	= -1; | 
|  | host->irq	= irq; | 
|  | host->id	= pdev->id; | 
|  | host->slot_id	= 0; | 
|  | host->mapbase	= res->start; | 
|  | host->base	= ioremap(host->mapbase, SZ_4K); | 
|  | host->power_mode = MMC_POWER_OFF; | 
|  |  | 
|  | platform_set_drvdata(pdev, host); | 
|  | INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect); | 
|  |  | 
|  | if (mmc_slot(host).power_saving) | 
|  | mmc->ops	= &omap_hsmmc_ps_ops; | 
|  | else | 
|  | mmc->ops	= &omap_hsmmc_ops; | 
|  |  | 
|  | /* | 
|  | * If regulator_disable can only put vcc_aux to sleep then there is | 
|  | * no off state. | 
|  | */ | 
|  | if (mmc_slot(host).vcc_aux_disable_is_sleep) | 
|  | mmc_slot(host).no_off = 1; | 
|  |  | 
|  | mmc->f_min	= 400000; | 
|  | mmc->f_max	= 52000000; | 
|  |  | 
|  | spin_lock_init(&host->irq_lock); | 
|  |  | 
|  | host->iclk = clk_get(&pdev->dev, "ick"); | 
|  | if (IS_ERR(host->iclk)) { | 
|  | ret = PTR_ERR(host->iclk); | 
|  | host->iclk = NULL; | 
|  | goto err1; | 
|  | } | 
|  | host->fclk = clk_get(&pdev->dev, "fck"); | 
|  | if (IS_ERR(host->fclk)) { | 
|  | ret = PTR_ERR(host->fclk); | 
|  | host->fclk = NULL; | 
|  | clk_put(host->iclk); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | omap_hsmmc_context_save(host); | 
|  |  | 
|  | mmc->caps |= MMC_CAP_DISABLE; | 
|  | mmc_set_disable_delay(mmc, OMAP_MMC_DISABLED_TIMEOUT); | 
|  | /* we start off in DISABLED state */ | 
|  | host->dpm_state = DISABLED; | 
|  |  | 
|  | if (mmc_host_enable(host->mmc) != 0) { | 
|  | clk_put(host->iclk); | 
|  | clk_put(host->fclk); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | if (clk_enable(host->iclk) != 0) { | 
|  | mmc_host_disable(host->mmc); | 
|  | clk_put(host->iclk); | 
|  | clk_put(host->fclk); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | if (cpu_is_omap2430()) { | 
|  | host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); | 
|  | /* | 
|  | * MMC can still work without debounce clock. | 
|  | */ | 
|  | if (IS_ERR(host->dbclk)) | 
|  | dev_warn(mmc_dev(host->mmc), | 
|  | "Failed to get debounce clock\n"); | 
|  | else | 
|  | host->got_dbclk = 1; | 
|  |  | 
|  | if (host->got_dbclk) | 
|  | if (clk_enable(host->dbclk) != 0) | 
|  | dev_dbg(mmc_dev(host->mmc), "Enabling debounce" | 
|  | " clk failed\n"); | 
|  | } | 
|  |  | 
|  | /* Since we do only SG emulation, we can have as many segs | 
|  | * as we want. */ | 
|  | mmc->max_phys_segs = 1024; | 
|  | mmc->max_hw_segs = 1024; | 
|  |  | 
|  | mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */ | 
|  | mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */ | 
|  | mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; | 
|  | mmc->max_seg_size = mmc->max_req_size; | 
|  |  | 
|  | mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | | 
|  | MMC_CAP_WAIT_WHILE_BUSY; | 
|  |  | 
|  | if (mmc_slot(host).wires >= 8) | 
|  | mmc->caps |= MMC_CAP_8_BIT_DATA; | 
|  | else if (mmc_slot(host).wires >= 4) | 
|  | mmc->caps |= MMC_CAP_4_BIT_DATA; | 
|  |  | 
|  | if (mmc_slot(host).nonremovable) | 
|  | mmc->caps |= MMC_CAP_NONREMOVABLE; | 
|  |  | 
|  | omap_hsmmc_conf_bus_power(host); | 
|  |  | 
|  | /* Select DMA lines */ | 
|  | switch (host->id) { | 
|  | case OMAP_MMC1_DEVID: | 
|  | host->dma_line_tx = OMAP24XX_DMA_MMC1_TX; | 
|  | host->dma_line_rx = OMAP24XX_DMA_MMC1_RX; | 
|  | break; | 
|  | case OMAP_MMC2_DEVID: | 
|  | host->dma_line_tx = OMAP24XX_DMA_MMC2_TX; | 
|  | host->dma_line_rx = OMAP24XX_DMA_MMC2_RX; | 
|  | break; | 
|  | case OMAP_MMC3_DEVID: | 
|  | host->dma_line_tx = OMAP34XX_DMA_MMC3_TX; | 
|  | host->dma_line_rx = OMAP34XX_DMA_MMC3_RX; | 
|  | break; | 
|  | case OMAP_MMC4_DEVID: | 
|  | host->dma_line_tx = OMAP44XX_DMA_MMC4_TX; | 
|  | host->dma_line_rx = OMAP44XX_DMA_MMC4_RX; | 
|  | break; | 
|  | case OMAP_MMC5_DEVID: | 
|  | host->dma_line_tx = OMAP44XX_DMA_MMC5_TX; | 
|  | host->dma_line_rx = OMAP44XX_DMA_MMC5_RX; | 
|  | break; | 
|  | default: | 
|  | dev_err(mmc_dev(host->mmc), "Invalid MMC id\n"); | 
|  | goto err_irq; | 
|  | } | 
|  |  | 
|  | /* Request IRQ for MMC operations */ | 
|  | ret = request_irq(host->irq, omap_hsmmc_irq, IRQF_DISABLED, | 
|  | mmc_hostname(mmc), host); | 
|  | if (ret) { | 
|  | dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); | 
|  | goto err_irq; | 
|  | } | 
|  |  | 
|  | if (pdata->init != NULL) { | 
|  | if (pdata->init(&pdev->dev) != 0) { | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Unable to configure MMC IRQs\n"); | 
|  | goto err_irq_cd_init; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) { | 
|  | ret = omap_hsmmc_reg_get(host); | 
|  | if (ret) | 
|  | goto err_reg; | 
|  | host->use_reg = 1; | 
|  | } | 
|  |  | 
|  | mmc->ocr_avail = mmc_slot(host).ocr_mask; | 
|  |  | 
|  | /* Request IRQ for card detect */ | 
|  | if ((mmc_slot(host).card_detect_irq)) { | 
|  | ret = request_irq(mmc_slot(host).card_detect_irq, | 
|  | omap_hsmmc_cd_handler, | 
|  | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | 
|  | | IRQF_DISABLED, | 
|  | mmc_hostname(mmc), host); | 
|  | if (ret) { | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Unable to grab MMC CD IRQ\n"); | 
|  | goto err_irq_cd; | 
|  | } | 
|  | } | 
|  |  | 
|  | omap_hsmmc_disable_irq(host); | 
|  |  | 
|  | mmc_host_lazy_disable(host->mmc); | 
|  |  | 
|  | omap_hsmmc_protect_card(host); | 
|  |  | 
|  | mmc_add_host(mmc); | 
|  |  | 
|  | if (mmc_slot(host).name != NULL) { | 
|  | ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name); | 
|  | if (ret < 0) | 
|  | goto err_slot_name; | 
|  | } | 
|  | if (mmc_slot(host).card_detect_irq && mmc_slot(host).get_cover_state) { | 
|  | ret = device_create_file(&mmc->class_dev, | 
|  | &dev_attr_cover_switch); | 
|  | if (ret < 0) | 
|  | goto err_slot_name; | 
|  | } | 
|  |  | 
|  | omap_hsmmc_debugfs(mmc); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_slot_name: | 
|  | mmc_remove_host(mmc); | 
|  | free_irq(mmc_slot(host).card_detect_irq, host); | 
|  | err_irq_cd: | 
|  | if (host->use_reg) | 
|  | omap_hsmmc_reg_put(host); | 
|  | err_reg: | 
|  | if (host->pdata->cleanup) | 
|  | host->pdata->cleanup(&pdev->dev); | 
|  | err_irq_cd_init: | 
|  | free_irq(host->irq, host); | 
|  | err_irq: | 
|  | mmc_host_disable(host->mmc); | 
|  | clk_disable(host->iclk); | 
|  | clk_put(host->fclk); | 
|  | clk_put(host->iclk); | 
|  | if (host->got_dbclk) { | 
|  | clk_disable(host->dbclk); | 
|  | clk_put(host->dbclk); | 
|  | } | 
|  | err1: | 
|  | iounmap(host->base); | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | mmc_free_host(mmc); | 
|  | err_alloc: | 
|  | omap_hsmmc_gpio_free(pdata); | 
|  | err: | 
|  | release_mem_region(res->start, res->end - res->start + 1); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int omap_hsmmc_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct omap_hsmmc_host *host = platform_get_drvdata(pdev); | 
|  | struct resource *res; | 
|  |  | 
|  | if (host) { | 
|  | mmc_host_enable(host->mmc); | 
|  | mmc_remove_host(host->mmc); | 
|  | if (host->use_reg) | 
|  | omap_hsmmc_reg_put(host); | 
|  | if (host->pdata->cleanup) | 
|  | host->pdata->cleanup(&pdev->dev); | 
|  | free_irq(host->irq, host); | 
|  | if (mmc_slot(host).card_detect_irq) | 
|  | free_irq(mmc_slot(host).card_detect_irq, host); | 
|  | flush_scheduled_work(); | 
|  |  | 
|  | mmc_host_disable(host->mmc); | 
|  | clk_disable(host->iclk); | 
|  | clk_put(host->fclk); | 
|  | clk_put(host->iclk); | 
|  | if (host->got_dbclk) { | 
|  | clk_disable(host->dbclk); | 
|  | clk_put(host->dbclk); | 
|  | } | 
|  |  | 
|  | mmc_free_host(host->mmc); | 
|  | iounmap(host->base); | 
|  | omap_hsmmc_gpio_free(pdev->dev.platform_data); | 
|  | } | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (res) | 
|  | release_mem_region(res->start, res->end - res->start + 1); | 
|  | platform_set_drvdata(pdev, NULL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int omap_hsmmc_suspend(struct device *dev) | 
|  | { | 
|  | int ret = 0; | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct omap_hsmmc_host *host = platform_get_drvdata(pdev); | 
|  | pm_message_t state = PMSG_SUSPEND; /* unused by MMC core */ | 
|  |  | 
|  | if (host && host->suspended) | 
|  | return 0; | 
|  |  | 
|  | if (host) { | 
|  | host->suspended = 1; | 
|  | if (host->pdata->suspend) { | 
|  | ret = host->pdata->suspend(&pdev->dev, | 
|  | host->slot_id); | 
|  | if (ret) { | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Unable to handle MMC board" | 
|  | " level suspend\n"); | 
|  | host->suspended = 0; | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | cancel_work_sync(&host->mmc_carddetect_work); | 
|  | mmc_host_enable(host->mmc); | 
|  | ret = mmc_suspend_host(host->mmc); | 
|  | if (ret == 0) { | 
|  | omap_hsmmc_disable_irq(host); | 
|  | OMAP_HSMMC_WRITE(host->base, HCTL, | 
|  | OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); | 
|  | mmc_host_disable(host->mmc); | 
|  | clk_disable(host->iclk); | 
|  | if (host->got_dbclk) | 
|  | clk_disable(host->dbclk); | 
|  | } else { | 
|  | host->suspended = 0; | 
|  | if (host->pdata->resume) { | 
|  | ret = host->pdata->resume(&pdev->dev, | 
|  | host->slot_id); | 
|  | if (ret) | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Unmask interrupt failed\n"); | 
|  | } | 
|  | mmc_host_disable(host->mmc); | 
|  | } | 
|  |  | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Routine to resume the MMC device */ | 
|  | static int omap_hsmmc_resume(struct device *dev) | 
|  | { | 
|  | int ret = 0; | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct omap_hsmmc_host *host = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (host && !host->suspended) | 
|  | return 0; | 
|  |  | 
|  | if (host) { | 
|  | ret = clk_enable(host->iclk); | 
|  | if (ret) | 
|  | goto clk_en_err; | 
|  |  | 
|  | if (mmc_host_enable(host->mmc) != 0) { | 
|  | clk_disable(host->iclk); | 
|  | goto clk_en_err; | 
|  | } | 
|  |  | 
|  | if (host->got_dbclk) | 
|  | clk_enable(host->dbclk); | 
|  |  | 
|  | omap_hsmmc_conf_bus_power(host); | 
|  |  | 
|  | if (host->pdata->resume) { | 
|  | ret = host->pdata->resume(&pdev->dev, host->slot_id); | 
|  | if (ret) | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Unmask interrupt failed\n"); | 
|  | } | 
|  |  | 
|  | omap_hsmmc_protect_card(host); | 
|  |  | 
|  | /* Notify the core to resume the host */ | 
|  | ret = mmc_resume_host(host->mmc); | 
|  | if (ret == 0) | 
|  | host->suspended = 0; | 
|  |  | 
|  | mmc_host_lazy_disable(host->mmc); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | clk_en_err: | 
|  | dev_dbg(mmc_dev(host->mmc), | 
|  | "Failed to enable MMC clocks during resume\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #else | 
|  | #define omap_hsmmc_suspend	NULL | 
|  | #define omap_hsmmc_resume		NULL | 
|  | #endif | 
|  |  | 
|  | static struct dev_pm_ops omap_hsmmc_dev_pm_ops = { | 
|  | .suspend	= omap_hsmmc_suspend, | 
|  | .resume		= omap_hsmmc_resume, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver omap_hsmmc_driver = { | 
|  | .remove		= omap_hsmmc_remove, | 
|  | .driver		= { | 
|  | .name = DRIVER_NAME, | 
|  | .owner = THIS_MODULE, | 
|  | .pm = &omap_hsmmc_dev_pm_ops, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init omap_hsmmc_init(void) | 
|  | { | 
|  | /* Register the MMC driver */ | 
|  | return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); | 
|  | } | 
|  |  | 
|  | static void __exit omap_hsmmc_cleanup(void) | 
|  | { | 
|  | /* Unregister MMC driver */ | 
|  | platform_driver_unregister(&omap_hsmmc_driver); | 
|  | } | 
|  |  | 
|  | module_init(omap_hsmmc_init); | 
|  | module_exit(omap_hsmmc_cleanup); | 
|  |  | 
|  | MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:" DRIVER_NAME); | 
|  | MODULE_AUTHOR("Texas Instruments Inc"); |