|  | /* | 
|  | * Backlight driver for Wolfson Microelectronics WM831x PMICs | 
|  | * | 
|  | * Copyright 2009 Wolfson Microelectonics plc | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/fb.h> | 
|  | #include <linux/backlight.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <linux/mfd/wm831x/core.h> | 
|  | #include <linux/mfd/wm831x/pdata.h> | 
|  | #include <linux/mfd/wm831x/regulator.h> | 
|  |  | 
|  | struct wm831x_backlight_data { | 
|  | struct wm831x *wm831x; | 
|  | int isink_reg; | 
|  | int current_brightness; | 
|  | }; | 
|  |  | 
|  | static int wm831x_backlight_set(struct backlight_device *bl, int brightness) | 
|  | { | 
|  | struct wm831x_backlight_data *data = bl_get_data(bl); | 
|  | struct wm831x *wm831x = data->wm831x; | 
|  | int power_up = !data->current_brightness && brightness; | 
|  | int power_down = data->current_brightness && !brightness; | 
|  | int ret; | 
|  |  | 
|  | if (power_up) { | 
|  | /* Enable the ISINK */ | 
|  | ret = wm831x_set_bits(wm831x, data->isink_reg, | 
|  | WM831X_CS1_ENA, WM831X_CS1_ENA); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | /* Enable the DC-DC */ | 
|  | ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, | 
|  | WM831X_DC4_ENA, WM831X_DC4_ENA); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (power_down) { | 
|  | /* DCDC first */ | 
|  | ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, | 
|  | WM831X_DC4_ENA, 0); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | /* ISINK */ | 
|  | ret = wm831x_set_bits(wm831x, data->isink_reg, | 
|  | WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* Set the new brightness */ | 
|  | ret = wm831x_set_bits(wm831x, data->isink_reg, | 
|  | WM831X_CS1_ISEL_MASK, brightness); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | if (power_up) { | 
|  | /* Drive current through the ISINK */ | 
|  | ret = wm831x_set_bits(wm831x, data->isink_reg, | 
|  | WM831X_CS1_DRIVE, WM831X_CS1_DRIVE); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | data->current_brightness = brightness; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | /* If we were in the middle of a power transition always shut down | 
|  | * for safety. | 
|  | */ | 
|  | if (power_up || power_down) { | 
|  | wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0); | 
|  | wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wm831x_backlight_update_status(struct backlight_device *bl) | 
|  | { | 
|  | int brightness = bl->props.brightness; | 
|  |  | 
|  | if (bl->props.power != FB_BLANK_UNBLANK) | 
|  | brightness = 0; | 
|  |  | 
|  | if (bl->props.fb_blank != FB_BLANK_UNBLANK) | 
|  | brightness = 0; | 
|  |  | 
|  | if (bl->props.state & BL_CORE_SUSPENDED) | 
|  | brightness = 0; | 
|  |  | 
|  | return wm831x_backlight_set(bl, brightness); | 
|  | } | 
|  |  | 
|  | static int wm831x_backlight_get_brightness(struct backlight_device *bl) | 
|  | { | 
|  | struct wm831x_backlight_data *data = bl_get_data(bl); | 
|  | return data->current_brightness; | 
|  | } | 
|  |  | 
|  | static const struct backlight_ops wm831x_backlight_ops = { | 
|  | .options = BL_CORE_SUSPENDRESUME, | 
|  | .update_status	= wm831x_backlight_update_status, | 
|  | .get_brightness	= wm831x_backlight_get_brightness, | 
|  | }; | 
|  |  | 
|  | static int wm831x_backlight_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); | 
|  | struct wm831x_pdata *wm831x_pdata; | 
|  | struct wm831x_backlight_pdata *pdata; | 
|  | struct wm831x_backlight_data *data; | 
|  | struct backlight_device *bl; | 
|  | struct backlight_properties props; | 
|  | int ret, i, max_isel, isink_reg, dcdc_cfg; | 
|  |  | 
|  | /* We need platform data */ | 
|  | if (pdev->dev.parent->platform_data) { | 
|  | wm831x_pdata = pdev->dev.parent->platform_data; | 
|  | pdata = wm831x_pdata->backlight; | 
|  | } else { | 
|  | pdata = NULL; | 
|  | } | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&pdev->dev, "No platform data supplied\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Figure out the maximum current we can use */ | 
|  | for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) { | 
|  | if (wm831x_isinkv_values[i] > pdata->max_uA) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (i == 0) { | 
|  | dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA); | 
|  | return -EINVAL; | 
|  | } | 
|  | max_isel = i - 1; | 
|  |  | 
|  | if (pdata->max_uA != wm831x_isinkv_values[max_isel]) | 
|  | dev_warn(&pdev->dev, | 
|  | "Maximum current is %duA not %duA as requested\n", | 
|  | wm831x_isinkv_values[max_isel], pdata->max_uA); | 
|  |  | 
|  | switch (pdata->isink) { | 
|  | case 1: | 
|  | isink_reg = WM831X_CURRENT_SINK_1; | 
|  | dcdc_cfg = 0; | 
|  | break; | 
|  | case 2: | 
|  | isink_reg = WM831X_CURRENT_SINK_2; | 
|  | dcdc_cfg = WM831X_DC4_FBSRC; | 
|  | break; | 
|  | default: | 
|  | dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Configure the ISINK to use for feedback */ | 
|  | ret = wm831x_reg_unlock(wm831x); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC, | 
|  | dcdc_cfg); | 
|  |  | 
|  | wm831x_reg_lock(wm831x); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | data = kzalloc(sizeof(*data), GFP_KERNEL); | 
|  | if (data == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data->wm831x = wm831x; | 
|  | data->current_brightness = 0; | 
|  | data->isink_reg = isink_reg; | 
|  |  | 
|  | props.max_brightness = max_isel; | 
|  | bl = backlight_device_register("wm831x", &pdev->dev, data, | 
|  | &wm831x_backlight_ops, &props); | 
|  | if (IS_ERR(bl)) { | 
|  | dev_err(&pdev->dev, "failed to register backlight\n"); | 
|  | kfree(data); | 
|  | return PTR_ERR(bl); | 
|  | } | 
|  |  | 
|  | bl->props.brightness = max_isel; | 
|  |  | 
|  | platform_set_drvdata(pdev, bl); | 
|  |  | 
|  | /* Disable the DCDC if it was started so we can bootstrap */ | 
|  | wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0); | 
|  |  | 
|  |  | 
|  | backlight_update_status(bl); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm831x_backlight_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct backlight_device *bl = platform_get_drvdata(pdev); | 
|  | struct wm831x_backlight_data *data = bl_get_data(bl); | 
|  |  | 
|  | backlight_device_unregister(bl); | 
|  | kfree(data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver wm831x_backlight_driver = { | 
|  | .driver		= { | 
|  | .name	= "wm831x-backlight", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .probe		= wm831x_backlight_probe, | 
|  | .remove		= wm831x_backlight_remove, | 
|  | }; | 
|  |  | 
|  | static int __init wm831x_backlight_init(void) | 
|  | { | 
|  | return platform_driver_register(&wm831x_backlight_driver); | 
|  | } | 
|  | module_init(wm831x_backlight_init); | 
|  |  | 
|  | static void __exit wm831x_backlight_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&wm831x_backlight_driver); | 
|  | } | 
|  | module_exit(wm831x_backlight_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs"); | 
|  | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:wm831x-backlight"); |