ARM: at91: add at91sam9260 DT support
The at91sam9260 and at91sam9g20 share most of the same IP.
So udpate the node property in the at91sam9g20 only.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 773ef48..0eb1a75 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -1,238 +1,18 @@
/*
* at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
*
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
- * Licensed under GPLv2 or later.
+ * Licensed under GPLv2.
*/
-/include/ "skeleton.dtsi"
+/include/ "at91sam9260.dtsi"
/ {
model = "Atmel AT91SAM9G20 family SoC";
compatible = "atmel,at91sam9g20";
- interrupt-parent = <&aic>;
-
- aliases {
- serial0 = &dbgu;
- serial1 = &usart0;
- serial2 = &usart1;
- serial3 = &usart2;
- serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
- gpio0 = &pioA;
- gpio1 = &pioB;
- gpio2 = &pioC;
- tcb0 = &tcb0;
- tcb1 = &tcb1;
- };
- cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
- };
- };
memory {
reg = <0x20000000 0x08000000>;
};
-
- ahb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- apb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
- compatible = "atmel,at91rm9200-aic";
- interrupt-controller;
- reg = <0xfffff000 0x200>;
- };
-
- ramc0: ramc@ffffea00 {
- compatible = "atmel,at91sam9260-sdramc";
- reg = <0xffffea00 0x200>;
- };
-
- pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
- reg = <0xfffffc00 0x100>;
- };
-
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
- };
-
- shdwc@fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- };
-
- pit: timer@fffffd30 {
- compatible = "atmel,at91sam9260-pit";
- reg = <0xfffffd30 0xf>;
- interrupts = <1 4>;
- };
-
- tcb0: timer@fffa0000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffa0000 0x100>;
- interrupts = <17 4 18 4 19 4>;
- };
-
- tcb1: timer@fffdc000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffdc000 0x100>;
- interrupts = <26 4 27 4 28 4>;
- };
-
- pioA: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioB: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <3 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioC: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
- status = "disabled";
- };
-
- usart0: serial@fffb0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb0000 0x200>;
- interrupts = <6 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart1: serial@fffb4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb4000 0x200>;
- interrupts = <7 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart2: serial@fffb8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb8000 0x200>;
- interrupts = <8 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart3: serial@fffd0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd0000 0x200>;
- interrupts = <23 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart4: serial@fffd4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd4000 0x200>;
- interrupts = <24 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart5: serial@fffd8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd8000 0x200>;
- interrupts = <25 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- macb0: ethernet@fffc4000 {
- compatible = "cdns,at32ap7000-macb", "cdns,macb";
- reg = <0xfffc4000 0x100>;
- interrupts = <21 4>;
- status = "disabled";
- };
-
- usb1: gadget@fffa4000 {
- compatible = "atmel,at91rm9200-udc";
- reg = <0xfffa4000 0x4000>;
- interrupts = <10 4>;
- status = "disabled";
- };
- };
-
- nand0: nand@40000000 {
- compatible = "atmel,at91rm9200-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x40000000 0x10000000
- 0xffffe800 0x200
- >;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- gpios = <&pioC 13 0
- &pioC 14 0
- 0
- >;
- status = "disabled";
- };
-
- usb0: ohci@00500000 {
- compatible = "atmel,at91rm9200-ohci", "usb-ohci";
- reg = <0x00500000 0x100000>;
- interrupts = <20 4>;
- status = "disabled";
- };
- };
-
- i2c@0 {
- compatible = "i2c-gpio";
- gpios = <&pioA 23 0 /* sda */
- &pioA 24 0 /* scl */
- >;
- i2c-gpio,sda-open-drain;
- i2c-gpio,scl-open-drain;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
};