MIPS: Platform files for XLR/XLS processor support

* include/asm/netlogic added with files common for all Netlogic processors
  (common with XLP which will be added later)
* include/asm/netlogic/xlr for XLR/XLS chip specific files
* netlogic/xlr for XLR/XLS platform files

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2334/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
new file mode 100644
index 0000000..4828025
--- /dev/null
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/smp-ops.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/psb-bootinfo.h>
+
+#include <asm/netlogic/xlr/xlr.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/gpio.h>
+
+unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE);
+unsigned long nlm_common_ebase = 0x0;
+struct psb_info nlm_prom_info;
+
+static void nlm_early_serial_setup(void)
+{
+	struct uart_port s;
+	nlm_reg_t *uart_base;
+
+	uart_base = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET);
+	memset(&s, 0, sizeof(s));
+	s.flags		= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	s.iotype	= UPIO_MEM32;
+	s.regshift	= 2;
+	s.irq		= PIC_UART_0_IRQ;
+	s.uartclk	= PIC_CLKS_PER_SEC;
+	s.serial_in	= nlm_xlr_uart_in;
+	s.serial_out	= nlm_xlr_uart_out;
+	s.mapbase	= (unsigned long)uart_base;
+	s.membase	= (unsigned char __iomem *)uart_base;
+	early_serial_setup(&s);
+}
+
+static void nlm_linux_exit(void)
+{
+	nlm_reg_t *mmio;
+
+	mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET);
+	/* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
+	netlogic_write_reg(mmio, NETLOGIC_GPIO_SWRESET_REG, 1);
+	for ( ; ; )
+		cpu_wait();
+}
+
+void __init plat_mem_setup(void)
+{
+	panic_timeout	= 5;
+	_machine_restart = (void (*)(char *))nlm_linux_exit;
+	_machine_halt	= nlm_linux_exit;
+	pm_power_off	= nlm_linux_exit;
+}
+
+const char *get_system_type(void)
+{
+	return "Netlogic XLR/XLS Series";
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing yet */
+}
+
+static void build_arcs_cmdline(int *argv)
+{
+	int i, remain, len;
+	char *arg;
+
+	remain = sizeof(arcs_cmdline) - 1;
+	arcs_cmdline[0] = '\0';
+	for (i = 0; argv[i] != 0; i++) {
+		arg = (char *)(long)argv[i];
+		len = strlen(arg);
+		if (len + 1 > remain)
+			break;
+		strcat(arcs_cmdline, arg);
+		strcat(arcs_cmdline, " ");
+		remain -=  len + 1;
+	}
+
+	/* Add the default options here */
+	if ((strstr(arcs_cmdline, "console=")) == NULL) {
+		arg = "console=ttyS0,38400 ";
+		len = strlen(arg);
+		if (len > remain)
+			goto fail;
+		strcat(arcs_cmdline, arg);
+		remain -= len;
+	}
+#ifdef CONFIG_BLK_DEV_INITRD
+	if ((strstr(arcs_cmdline, "rdinit=")) == NULL) {
+		arg = "rdinit=/sbin/init ";
+		len = strlen(arg);
+		if (len > remain)
+			goto fail;
+		strcat(arcs_cmdline, arg);
+		remain -= len;
+	}
+#endif
+	return;
+fail:
+	panic("Cannot add %s, command line too big!", arg);
+}
+
+static void prom_add_memory(void)
+{
+	struct nlm_boot_mem_map *bootm;
+	u64 start, size;
+	u64 pref_backup = 512;  /* avoid pref walking beyond end */
+	int i;
+
+	bootm = (void *)(long)nlm_prom_info.psb_mem_map;
+	for (i = 0; i < bootm->nr_map; i++) {
+		if (bootm->map[i].type != BOOT_MEM_RAM)
+			continue;
+		start = bootm->map[i].addr;
+		size   = bootm->map[i].size;
+
+		/* Work around for using bootloader mem */
+		if (i == 0 && start == 0 && size == 0x0c000000)
+			size = 0x0ff00000;
+
+		add_memory_region(start, size - pref_backup, BOOT_MEM_RAM);
+	}
+}
+
+void __init prom_init(void)
+{
+	int *argv, *envp;		/* passed as 32 bit ptrs */
+	struct psb_info *prom_infop;
+
+	/* truncate to 32 bit and sign extend all args */
+	argv = (int *)(long)(int)fw_arg1;
+	envp = (int *)(long)(int)fw_arg2;
+	prom_infop = (struct psb_info *)(long)(int)fw_arg3;
+
+	nlm_prom_info = *prom_infop;
+
+	nlm_early_serial_setup();
+	build_arcs_cmdline(argv);
+	nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
+	prom_add_memory();
+
+#ifdef CONFIG_SMP
+	nlm_wakeup_secondary_cpus(nlm_prom_info.online_cpu_map);
+	register_smp_ops(&nlm_smp_ops);
+#endif
+}