s390/zcrypt: Separate msgtype implementation from card modules.
Msgtype implementations are now separated from card specific modules
and can be dynamically registered. Existing msgtype implementations
are restructured in modules.
Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c
index ccb4f8b6..c7275e3 100644
--- a/drivers/s390/crypto/zcrypt_pcixcc.c
+++ b/drivers/s390/crypto/zcrypt_pcixcc.c
@@ -1,13 +1,14 @@
/*
* zcrypt 2.1.0
*
- * Copyright IBM Corp. 2001, 2006
+ * Copyright IBM Corp. 2001, 2012
* Author(s): Robert Burroughs
* Eric Rossman (edrossma@us.ibm.com)
*
* Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
* Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Ralph Wuerthner <rwuerthn@de.ibm.com>
+ * MSGTYPE restruct: Holger Dengler <hd@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -35,9 +36,10 @@
#include "ap_bus.h"
#include "zcrypt_api.h"
#include "zcrypt_error.h"
-#include "zcrypt_pcicc.h"
+#include "zcrypt_msgtype6.h"
#include "zcrypt_pcixcc.h"
#include "zcrypt_cca_key.h"
+#include "zcrypt_msgtype6.h"
#define PCIXCC_MIN_MOD_SIZE 16 /* 128 bits */
#define PCIXCC_MIN_MOD_SIZE_OLD 64 /* 512 bits */
@@ -75,14 +77,12 @@
MODULE_DEVICE_TABLE(ap, zcrypt_pcixcc_ids);
MODULE_AUTHOR("IBM Corporation");
-MODULE_DESCRIPTION("PCIXCC Cryptographic Coprocessor device driver, "
- "Copyright IBM Corp. 2001, 2006");
+MODULE_DESCRIPTION("PCIXCC Cryptographic Coprocessor device driver, " \
+ "Copyright IBM Corp. 2001, 2012");
MODULE_LICENSE("GPL");
static int zcrypt_pcixcc_probe(struct ap_device *ap_dev);
static void zcrypt_pcixcc_remove(struct ap_device *ap_dev);
-static void zcrypt_pcixcc_receive(struct ap_device *, struct ap_message *,
- struct ap_message *);
static struct ap_driver zcrypt_pcixcc_driver = {
.probe = zcrypt_pcixcc_probe,
@@ -92,766 +92,6 @@
};
/**
- * The following is used to initialize the CPRBX passed to the PCIXCC/CEX2C
- * card in a type6 message. The 3 fields that must be filled in at execution
- * time are req_parml, rpl_parml and usage_domain.
- * Everything about this interface is ascii/big-endian, since the
- * device does *not* have 'Intel inside'.
- *
- * The CPRBX is followed immediately by the parm block.
- * The parm block contains:
- * - function code ('PD' 0x5044 or 'PK' 0x504B)
- * - rule block (one of:)
- * + 0x000A 'PKCS-1.2' (MCL2 'PD')
- * + 0x000A 'ZERO-PAD' (MCL2 'PK')
- * + 0x000A 'ZERO-PAD' (MCL3 'PD' or CEX2C 'PD')
- * + 0x000A 'MRP ' (MCL3 'PK' or CEX2C 'PK')
- * - VUD block
- */
-static struct CPRBX static_cprbx = {
- .cprb_len = 0x00DC,
- .cprb_ver_id = 0x02,
- .func_id = {0x54,0x32},
-};
-
-/**
- * Convert a ICAMEX message to a type6 MEX message.
- *
- * @zdev: crypto device pointer
- * @ap_msg: pointer to AP message
- * @mex: pointer to user input data
- *
- * Returns 0 on success or -EFAULT.
- */
-static int ICAMEX_msg_to_type6MEX_msgX(struct zcrypt_device *zdev,
- struct ap_message *ap_msg,
- struct ica_rsa_modexpo *mex)
-{
- static struct type6_hdr static_type6_hdrX = {
- .type = 0x06,
- .offset1 = 0x00000058,
- .agent_id = {'C','A',},
- .function_code = {'P','K'},
- };
- static struct function_and_rules_block static_pke_fnr = {
- .function_code = {'P','K'},
- .ulen = 10,
- .only_rule = {'M','R','P',' ',' ',' ',' ',' '}
- };
- static struct function_and_rules_block static_pke_fnr_MCL2 = {
- .function_code = {'P','K'},
- .ulen = 10,
- .only_rule = {'Z','E','R','O','-','P','A','D'}
- };
- struct {
- struct type6_hdr hdr;
- struct CPRBX cprbx;
- struct function_and_rules_block fr;
- unsigned short length;
- char text[0];
- } __attribute__((packed)) *msg = ap_msg->message;
- int size;
-
- /* VUD.ciphertext */
- msg->length = mex->inputdatalength + 2;
- if (copy_from_user(msg->text, mex->inputdata, mex->inputdatalength))
- return -EFAULT;
-
- /* Set up key which is located after the variable length text. */
- size = zcrypt_type6_mex_key_en(mex, msg->text+mex->inputdatalength, 1);
- if (size < 0)
- return size;
- size += sizeof(*msg) + mex->inputdatalength;
-
- /* message header, cprbx and f&r */
- msg->hdr = static_type6_hdrX;
- msg->hdr.ToCardLen1 = size - sizeof(msg->hdr);
- msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr);
-
- msg->cprbx = static_cprbx;
- msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid);
- msg->cprbx.rpl_msgbl = msg->hdr.FromCardLen1;
-
- msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ?
- static_pke_fnr_MCL2 : static_pke_fnr;
-
- msg->cprbx.req_parml = size - sizeof(msg->hdr) - sizeof(msg->cprbx);
-
- ap_msg->length = size;
- return 0;
-}
-
-/**
- * Convert a ICACRT message to a type6 CRT message.
- *
- * @zdev: crypto device pointer
- * @ap_msg: pointer to AP message
- * @crt: pointer to user input data
- *
- * Returns 0 on success or -EFAULT.
- */
-static int ICACRT_msg_to_type6CRT_msgX(struct zcrypt_device *zdev,
- struct ap_message *ap_msg,
- struct ica_rsa_modexpo_crt *crt)
-{
- static struct type6_hdr static_type6_hdrX = {
- .type = 0x06,
- .offset1 = 0x00000058,
- .agent_id = {'C','A',},
- .function_code = {'P','D'},
- };
- static struct function_and_rules_block static_pkd_fnr = {
- .function_code = {'P','D'},
- .ulen = 10,
- .only_rule = {'Z','E','R','O','-','P','A','D'}
- };
-
- static struct function_and_rules_block static_pkd_fnr_MCL2 = {
- .function_code = {'P','D'},
- .ulen = 10,
- .only_rule = {'P','K','C','S','-','1','.','2'}
- };
- struct {
- struct type6_hdr hdr;
- struct CPRBX cprbx;
- struct function_and_rules_block fr;
- unsigned short length;
- char text[0];
- } __attribute__((packed)) *msg = ap_msg->message;
- int size;
-
- /* VUD.ciphertext */
- msg->length = crt->inputdatalength + 2;
- if (copy_from_user(msg->text, crt->inputdata, crt->inputdatalength))
- return -EFAULT;
-
- /* Set up key which is located after the variable length text. */
- size = zcrypt_type6_crt_key(crt, msg->text + crt->inputdatalength, 1);
- if (size < 0)
- return size;
- size += sizeof(*msg) + crt->inputdatalength; /* total size of msg */
-
- /* message header, cprbx and f&r */
- msg->hdr = static_type6_hdrX;
- msg->hdr.ToCardLen1 = size - sizeof(msg->hdr);
- msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr);
-
- msg->cprbx = static_cprbx;
- msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid);
- msg->cprbx.req_parml = msg->cprbx.rpl_msgbl =
- size - sizeof(msg->hdr) - sizeof(msg->cprbx);
-
- msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ?
- static_pkd_fnr_MCL2 : static_pkd_fnr;
-
- ap_msg->length = size;
- return 0;
-}
-
-/**
- * Convert a XCRB message to a type6 CPRB message.
- *
- * @zdev: crypto device pointer
- * @ap_msg: pointer to AP message
- * @xcRB: pointer to user input data
- *
- * Returns 0 on success or -EFAULT, -EINVAL.
- */
-struct type86_fmt2_msg {
- struct type86_hdr hdr;
- struct type86_fmt2_ext fmt2;
-} __attribute__((packed));
-
-static int XCRB_msg_to_type6CPRB_msgX(struct zcrypt_device *zdev,
- struct ap_message *ap_msg,
- struct ica_xcRB *xcRB)
-{
- static struct type6_hdr static_type6_hdrX = {
- .type = 0x06,
- .offset1 = 0x00000058,
- };
- struct {
- struct type6_hdr hdr;
- struct CPRBX cprbx;
- } __attribute__((packed)) *msg = ap_msg->message;
-
- int rcblen = CEIL4(xcRB->request_control_blk_length);
- int replylen;
- char *req_data = ap_msg->message + sizeof(struct type6_hdr) + rcblen;
- char *function_code;
-
- /* length checks */
- ap_msg->length = sizeof(struct type6_hdr) +
- CEIL4(xcRB->request_control_blk_length) +
- xcRB->request_data_length;
- if (ap_msg->length > PCIXCC_MAX_XCRB_MESSAGE_SIZE)
- return -EINVAL;
- replylen = sizeof(struct type86_fmt2_msg) +
- CEIL4(xcRB->reply_control_blk_length) +
- xcRB->reply_data_length;
- if (replylen > PCIXCC_MAX_XCRB_MESSAGE_SIZE)
- return -EINVAL;
-
- /* prepare type6 header */
- msg->hdr = static_type6_hdrX;
- memcpy(msg->hdr.agent_id , &(xcRB->agent_ID), sizeof(xcRB->agent_ID));
- msg->hdr.ToCardLen1 = xcRB->request_control_blk_length;
- if (xcRB->request_data_length) {
- msg->hdr.offset2 = msg->hdr.offset1 + rcblen;
- msg->hdr.ToCardLen2 = xcRB->request_data_length;
- }
- msg->hdr.FromCardLen1 = xcRB->reply_control_blk_length;
- msg->hdr.FromCardLen2 = xcRB->reply_data_length;
-
- /* prepare CPRB */
- if (copy_from_user(&(msg->cprbx), xcRB->request_control_blk_addr,
- xcRB->request_control_blk_length))
- return -EFAULT;
- if (msg->cprbx.cprb_len + sizeof(msg->hdr.function_code) >
- xcRB->request_control_blk_length)
- return -EINVAL;
- function_code = ((unsigned char *)&msg->cprbx) + msg->cprbx.cprb_len;
- memcpy(msg->hdr.function_code, function_code, sizeof(msg->hdr.function_code));
-
- if (memcmp(function_code, "US", 2) == 0)
- ap_msg->special = 1;
- else
- ap_msg->special = 0;
-
- /* copy data block */
- if (xcRB->request_data_length &&
- copy_from_user(req_data, xcRB->request_data_address,
- xcRB->request_data_length))
- return -EFAULT;
- return 0;
-}
-
-/**
- * Prepare a type6 CPRB message for random number generation
- *
- * @ap_dev: AP device pointer
- * @ap_msg: pointer to AP message
- */
-static void rng_type6CPRB_msgX(struct ap_device *ap_dev,
- struct ap_message *ap_msg,
- unsigned random_number_length)
-{
- struct {
- struct type6_hdr hdr;
- struct CPRBX cprbx;
- char function_code[2];
- short int rule_length;
- char rule[8];
- short int verb_length;
- short int key_length;
- } __attribute__((packed)) *msg = ap_msg->message;
- static struct type6_hdr static_type6_hdrX = {
- .type = 0x06,
- .offset1 = 0x00000058,
- .agent_id = {'C', 'A'},
- .function_code = {'R', 'L'},
- .ToCardLen1 = sizeof *msg - sizeof(msg->hdr),
- .FromCardLen1 = sizeof *msg - sizeof(msg->hdr),
- };
- static struct CPRBX local_cprbx = {
- .cprb_len = 0x00dc,
- .cprb_ver_id = 0x02,
- .func_id = {0x54, 0x32},
- .req_parml = sizeof *msg - sizeof(msg->hdr) -
- sizeof(msg->cprbx),
- .rpl_msgbl = sizeof *msg - sizeof(msg->hdr),
- };
-
- msg->hdr = static_type6_hdrX;
- msg->hdr.FromCardLen2 = random_number_length,
- msg->cprbx = local_cprbx;
- msg->cprbx.rpl_datal = random_number_length,
- msg->cprbx.domain = AP_QID_QUEUE(ap_dev->qid);
- memcpy(msg->function_code, msg->hdr.function_code, 0x02);
- msg->rule_length = 0x0a;
- memcpy(msg->rule, "RANDOM ", 8);
- msg->verb_length = 0x02;
- msg->key_length = 0x02;
- ap_msg->length = sizeof *msg;
-}
-
-/**
- * Copy results from a type 86 ICA reply message back to user space.
- *
- * @zdev: crypto device pointer
- * @reply: reply AP message.
- * @data: pointer to user output data
- * @length: size of user output data
- *
- * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error.
- */
-struct type86x_reply {
- struct type86_hdr hdr;
- struct type86_fmt2_ext fmt2;
- struct CPRBX cprbx;
- unsigned char pad[4]; /* 4 byte function code/rules block ? */
- unsigned short length;
- char text[0];
-} __attribute__((packed));
-
-static int convert_type86_ica(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char __user *outputdata,
- unsigned int outputdatalength)
-{
- static unsigned char static_pad[] = {
- 0x00,0x02,
- 0x1B,0x7B,0x5D,0xB5,0x75,0x01,0x3D,0xFD,
- 0x8D,0xD1,0xC7,0x03,0x2D,0x09,0x23,0x57,
- 0x89,0x49,0xB9,0x3F,0xBB,0x99,0x41,0x5B,
- 0x75,0x21,0x7B,0x9D,0x3B,0x6B,0x51,0x39,
- 0xBB,0x0D,0x35,0xB9,0x89,0x0F,0x93,0xA5,
- 0x0B,0x47,0xF1,0xD3,0xBB,0xCB,0xF1,0x9D,
- 0x23,0x73,0x71,0xFF,0xF3,0xF5,0x45,0xFB,
- 0x61,0x29,0x23,0xFD,0xF1,0x29,0x3F,0x7F,
- 0x17,0xB7,0x1B,0xA9,0x19,0xBD,0x57,0xA9,
- 0xD7,0x95,0xA3,0xCB,0xED,0x1D,0xDB,0x45,
- 0x7D,0x11,0xD1,0x51,0x1B,0xED,0x71,0xE9,
- 0xB1,0xD1,0xAB,0xAB,0x21,0x2B,0x1B,0x9F,
- 0x3B,0x9F,0xF7,0xF7,0xBD,0x63,0xEB,0xAD,
- 0xDF,0xB3,0x6F,0x5B,0xDB,0x8D,0xA9,0x5D,
- 0xE3,0x7D,0x77,0x49,0x47,0xF5,0xA7,0xFD,
- 0xAB,0x2F,0x27,0x35,0x77,0xD3,0x49,0xC9,
- 0x09,0xEB,0xB1,0xF9,0xBF,0x4B,0xCB,0x2B,
- 0xEB,0xEB,0x05,0xFF,0x7D,0xC7,0x91,0x8B,
- 0x09,0x83,0xB9,0xB9,0x69,0x33,0x39,0x6B,
- 0x79,0x75,0x19,0xBF,0xBB,0x07,0x1D,0xBD,
- 0x29,0xBF,0x39,0x95,0x93,0x1D,0x35,0xC7,
- 0xC9,0x4D,0xE5,0x97,0x0B,0x43,0x9B,0xF1,
- 0x16,0x93,0x03,0x1F,0xA5,0xFB,0xDB,0xF3,
- 0x27,0x4F,0x27,0x61,0x05,0x1F,0xB9,0x23,
- 0x2F,0xC3,0x81,0xA9,0x23,0x71,0x55,0x55,
- 0xEB,0xED,0x41,0xE5,0xF3,0x11,0xF1,0x43,
- 0x69,0x03,0xBD,0x0B,0x37,0x0F,0x51,0x8F,
- 0x0B,0xB5,0x89,0x5B,0x67,0xA9,0xD9,0x4F,
- 0x01,0xF9,0x21,0x77,0x37,0x73,0x79,0xC5,
- 0x7F,0x51,0xC1,0xCF,0x97,0xA1,0x75,0xAD,
- 0x35,0x9D,0xD3,0xD3,0xA7,0x9D,0x5D,0x41,
- 0x6F,0x65,0x1B,0xCF,0xA9,0x87,0x91,0x09
- };
- struct type86x_reply *msg = reply->message;
- unsigned short service_rc, service_rs;
- unsigned int reply_len, pad_len;
- char *data;
-
- service_rc = msg->cprbx.ccp_rtcode;
- if (unlikely(service_rc != 0)) {
- service_rs = msg->cprbx.ccp_rscode;
- if (service_rc == 8 && service_rs == 66)
- return -EINVAL;
- if (service_rc == 8 && service_rs == 65)
- return -EINVAL;
- if (service_rc == 8 && service_rs == 770)
- return -EINVAL;
- if (service_rc == 8 && service_rs == 783) {
- zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD;
- return -EAGAIN;
- }
- if (service_rc == 12 && service_rs == 769)
- return -EINVAL;
- if (service_rc == 8 && service_rs == 72)
- return -EINVAL;
- zdev->online = 0;
- return -EAGAIN; /* repeat the request on a different device. */
- }
- data = msg->text;
- reply_len = msg->length - 2;
- if (reply_len > outputdatalength)
- return -EINVAL;
- /*
- * For all encipher requests, the length of the ciphertext (reply_len)
- * will always equal the modulus length. For MEX decipher requests
- * the output needs to get padded. Minimum pad size is 10.
- *
- * Currently, the cases where padding will be added is for:
- * - PCIXCC_MCL2 using a CRT form token (since PKD didn't support
- * ZERO-PAD and CRT is only supported for PKD requests)
- * - PCICC, always
- */
- pad_len = outputdatalength - reply_len;
- if (pad_len > 0) {
- if (pad_len < 10)
- return -EINVAL;
- /* 'restore' padding left in the PCICC/PCIXCC card. */
- if (copy_to_user(outputdata, static_pad, pad_len - 1))
- return -EFAULT;
- if (put_user(0, outputdata + pad_len - 1))
- return -EFAULT;
- }
- /* Copy the crypto response to user space. */
- if (copy_to_user(outputdata + pad_len, data, reply_len))
- return -EFAULT;
- return 0;
-}
-
-/**
- * Copy results from a type 86 XCRB reply message back to user space.
- *
- * @zdev: crypto device pointer
- * @reply: reply AP message.
- * @xcRB: pointer to XCRB
- *
- * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error.
- */
-static int convert_type86_xcrb(struct zcrypt_device *zdev,
- struct ap_message *reply,
- struct ica_xcRB *xcRB)
-{
- struct type86_fmt2_msg *msg = reply->message;
- char *data = reply->message;
-
- /* Copy CPRB to user */
- if (copy_to_user(xcRB->reply_control_blk_addr,
- data + msg->fmt2.offset1, msg->fmt2.count1))
- return -EFAULT;
- xcRB->reply_control_blk_length = msg->fmt2.count1;
-
- /* Copy data buffer to user */
- if (msg->fmt2.count2)
- if (copy_to_user(xcRB->reply_data_addr,
- data + msg->fmt2.offset2, msg->fmt2.count2))
- return -EFAULT;
- xcRB->reply_data_length = msg->fmt2.count2;
- return 0;
-}
-
-static int convert_type86_rng(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char *buffer)
-{
- struct {
- struct type86_hdr hdr;
- struct type86_fmt2_ext fmt2;
- struct CPRBX cprbx;
- } __attribute__((packed)) *msg = reply->message;
- char *data = reply->message;
-
- if (msg->cprbx.ccp_rtcode != 0 || msg->cprbx.ccp_rscode != 0)
- return -EINVAL;
- memcpy(buffer, data + msg->fmt2.offset2, msg->fmt2.count2);
- return msg->fmt2.count2;
-}
-
-static int convert_response_ica(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char __user *outputdata,
- unsigned int outputdatalength)
-{
- struct type86x_reply *msg = reply->message;
-
- /* Response type byte is the second byte in the response. */
- switch (((unsigned char *) reply->message)[1]) {
- case TYPE82_RSP_CODE:
- case TYPE88_RSP_CODE:
- return convert_error(zdev, reply);
- case TYPE86_RSP_CODE:
- if (msg->cprbx.ccp_rtcode &&
- (msg->cprbx.ccp_rscode == 0x14f) &&
- (outputdatalength > 256)) {
- if (zdev->max_exp_bit_length <= 17) {
- zdev->max_exp_bit_length = 17;
- return -EAGAIN;
- } else
- return -EINVAL;
- }
- if (msg->hdr.reply_code)
- return convert_error(zdev, reply);
- if (msg->cprbx.cprb_ver_id == 0x02)
- return convert_type86_ica(zdev, reply,
- outputdata, outputdatalength);
- /* Fall through, no break, incorrect cprb version is an unknown
- * response */
- default: /* Unknown response type, this should NEVER EVER happen */
- zdev->online = 0;
- return -EAGAIN; /* repeat the request on a different device. */
- }
-}
-
-static int convert_response_xcrb(struct zcrypt_device *zdev,
- struct ap_message *reply,
- struct ica_xcRB *xcRB)
-{
- struct type86x_reply *msg = reply->message;
-
- /* Response type byte is the second byte in the response. */
- switch (((unsigned char *) reply->message)[1]) {
- case TYPE82_RSP_CODE:
- case TYPE88_RSP_CODE:
- xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
- return convert_error(zdev, reply);
- case TYPE86_RSP_CODE:
- if (msg->hdr.reply_code) {
- memcpy(&(xcRB->status), msg->fmt2.apfs, sizeof(u32));
- return convert_error(zdev, reply);
- }
- if (msg->cprbx.cprb_ver_id == 0x02)
- return convert_type86_xcrb(zdev, reply, xcRB);
- /* Fall through, no break, incorrect cprb version is an unknown
- * response */
- default: /* Unknown response type, this should NEVER EVER happen */
- xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
- zdev->online = 0;
- return -EAGAIN; /* repeat the request on a different device. */
- }
-}
-
-static int convert_response_rng(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char *data)
-{
- struct type86x_reply *msg = reply->message;
-
- switch (msg->hdr.type) {
- case TYPE82_RSP_CODE:
- case TYPE88_RSP_CODE:
- return -EINVAL;
- case TYPE86_RSP_CODE:
- if (msg->hdr.reply_code)
- return -EINVAL;
- if (msg->cprbx.cprb_ver_id == 0x02)
- return convert_type86_rng(zdev, reply, data);
- /* Fall through, no break, incorrect cprb version is an unknown
- * response */
- default: /* Unknown response type, this should NEVER EVER happen */
- zdev->online = 0;
- return -EAGAIN; /* repeat the request on a different device. */
- }
-}
-
-/**
- * This function is called from the AP bus code after a crypto request
- * "msg" has finished with the reply message "reply".
- * It is called from tasklet context.
- * @ap_dev: pointer to the AP device
- * @msg: pointer to the AP message
- * @reply: pointer to the AP reply message
- */
-static void zcrypt_pcixcc_receive(struct ap_device *ap_dev,
- struct ap_message *msg,
- struct ap_message *reply)
-{
- static struct error_hdr error_reply = {
- .type = TYPE82_RSP_CODE,
- .reply_code = REP82_ERROR_MACHINE_FAILURE,
- };
- struct response_type *resp_type =
- (struct response_type *) msg->private;
- struct type86x_reply *t86r;
- int length;
-
- /* Copy the reply message to the request message buffer. */
- if (IS_ERR(reply)) {
- memcpy(msg->message, &error_reply, sizeof(error_reply));
- goto out;
- }
- t86r = reply->message;
- if (t86r->hdr.type == TYPE86_RSP_CODE &&
- t86r->cprbx.cprb_ver_id == 0x02) {
- switch (resp_type->type) {
- case PCIXCC_RESPONSE_TYPE_ICA:
- length = sizeof(struct type86x_reply)
- + t86r->length - 2;
- length = min(PCIXCC_MAX_ICA_RESPONSE_SIZE, length);
- memcpy(msg->message, reply->message, length);
- break;
- case PCIXCC_RESPONSE_TYPE_XCRB:
- length = t86r->fmt2.offset2 + t86r->fmt2.count2;
- length = min(PCIXCC_MAX_XCRB_MESSAGE_SIZE, length);
- memcpy(msg->message, reply->message, length);
- break;
- default:
- memcpy(msg->message, &error_reply, sizeof error_reply);
- }
- } else
- memcpy(msg->message, reply->message, sizeof error_reply);
-out:
- complete(&(resp_type->work));
-}
-
-static atomic_t zcrypt_step = ATOMIC_INIT(0);
-
-/**
- * The request distributor calls this function if it picked the PCIXCC/CEX2C
- * device to handle a modexpo request.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCIXCC/CEX2C device to the request distributor
- * @mex: pointer to the modexpo request buffer
- */
-static long zcrypt_pcixcc_modexpo(struct zcrypt_device *zdev,
- struct ica_rsa_modexpo *mex)
-{
- struct ap_message ap_msg;
- struct response_type resp_type = {
- .type = PCIXCC_RESPONSE_TYPE_ICA,
- };
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcixcc_receive;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &resp_type;
- rc = ICAMEX_msg_to_type6MEX_msgX(zdev, &ap_msg, mex);
- if (rc)
- goto out_free;
- init_completion(&resp_type.work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_ica(zdev, &ap_msg, mex->outputdata,
- mex->outputdatalength);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
-out_free:
- free_page((unsigned long) ap_msg.message);
- return rc;
-}
-
-/**
- * The request distributor calls this function if it picked the PCIXCC/CEX2C
- * device to handle a modexpo_crt request.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCIXCC/CEX2C device to the request distributor
- * @crt: pointer to the modexpoc_crt request buffer
- */
-static long zcrypt_pcixcc_modexpo_crt(struct zcrypt_device *zdev,
- struct ica_rsa_modexpo_crt *crt)
-{
- struct ap_message ap_msg;
- struct response_type resp_type = {
- .type = PCIXCC_RESPONSE_TYPE_ICA,
- };
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcixcc_receive;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &resp_type;
- rc = ICACRT_msg_to_type6CRT_msgX(zdev, &ap_msg, crt);
- if (rc)
- goto out_free;
- init_completion(&resp_type.work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_ica(zdev, &ap_msg, crt->outputdata,
- crt->outputdatalength);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
-out_free:
- free_page((unsigned long) ap_msg.message);
- return rc;
-}
-
-/**
- * The request distributor calls this function if it picked the PCIXCC/CEX2C
- * device to handle a send_cprb request.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCIXCC/CEX2C device to the request distributor
- * @xcRB: pointer to the send_cprb request buffer
- */
-static long zcrypt_pcixcc_send_cprb(struct zcrypt_device *zdev,
- struct ica_xcRB *xcRB)
-{
- struct ap_message ap_msg;
- struct response_type resp_type = {
- .type = PCIXCC_RESPONSE_TYPE_XCRB,
- };
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcixcc_receive;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &resp_type;
- rc = XCRB_msg_to_type6CPRB_msgX(zdev, &ap_msg, xcRB);
- if (rc)
- goto out_free;
- init_completion(&resp_type.work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_xcrb(zdev, &ap_msg, xcRB);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
-out_free:
- kzfree(ap_msg.message);
- return rc;
-}
-
-/**
- * The request distributor calls this function if it picked the PCIXCC/CEX2C
- * device to generate random data.
- * @zdev: pointer to zcrypt_device structure that identifies the
- * PCIXCC/CEX2C device to the request distributor
- * @buffer: pointer to a memory page to return random data
- */
-
-static long zcrypt_pcixcc_rng(struct zcrypt_device *zdev,
- char *buffer)
-{
- struct ap_message ap_msg;
- struct response_type resp_type = {
- .type = PCIXCC_RESPONSE_TYPE_XCRB,
- };
- int rc;
-
- ap_init_message(&ap_msg);
- ap_msg.message = kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL);
- if (!ap_msg.message)
- return -ENOMEM;
- ap_msg.receive = zcrypt_pcixcc_receive;
- ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
- atomic_inc_return(&zcrypt_step);
- ap_msg.private = &resp_type;
- rng_type6CPRB_msgX(zdev->ap_dev, &ap_msg, ZCRYPT_RNG_BUFFER_SIZE);
- init_completion(&resp_type.work);
- ap_queue_message(zdev->ap_dev, &ap_msg);
- rc = wait_for_completion_interruptible(&resp_type.work);
- if (rc == 0)
- rc = convert_response_rng(zdev, &ap_msg, buffer);
- else
- /* Signal pending. */
- ap_cancel_message(zdev->ap_dev, &ap_msg);
- kfree(ap_msg.message);
- return rc;
-}
-
-/**
- * The crypto operations for a PCIXCC/CEX2C card.
- */
-static struct zcrypt_ops zcrypt_pcixcc_ops = {
- .rsa_modexpo = zcrypt_pcixcc_modexpo,
- .rsa_modexpo_crt = zcrypt_pcixcc_modexpo_crt,
- .send_cprb = zcrypt_pcixcc_send_cprb,
-};
-
-static struct zcrypt_ops zcrypt_pcixcc_with_rng_ops = {
- .rsa_modexpo = zcrypt_pcixcc_modexpo,
- .rsa_modexpo_crt = zcrypt_pcixcc_modexpo_crt,
- .send_cprb = zcrypt_pcixcc_send_cprb,
- .rng = zcrypt_pcixcc_rng,
-};
-
-/**
* Micro-code detection function. Its sends a message to a pcixcc card
* to find out the microcode level.
* @ap_dev: pointer to the AP device.
@@ -1083,9 +323,11 @@
return rc;
}
if (rc)
- zdev->ops = &zcrypt_pcixcc_with_rng_ops;
+ zdev->ops = zcrypt_msgtype_request(MSGTYPE06_NAME,
+ MSGTYPE06_VARIANT_DEFAULT);
else
- zdev->ops = &zcrypt_pcixcc_ops;
+ zdev->ops = zcrypt_msgtype_request(MSGTYPE06_NAME,
+ MSGTYPE06_VARIANT_NORNG);
ap_dev->reply = &zdev->reply;
ap_dev->private = zdev;
rc = zcrypt_device_register(zdev);
@@ -1095,6 +337,7 @@
out_free:
ap_dev->private = NULL;
+ zcrypt_msgtype_release(zdev->ops);
zcrypt_device_free(zdev);
return rc;
}
@@ -1106,8 +349,10 @@
static void zcrypt_pcixcc_remove(struct ap_device *ap_dev)
{
struct zcrypt_device *zdev = ap_dev->private;
+ struct zcrypt_ops *zops = zdev->ops;
zcrypt_device_unregister(zdev);
+ zcrypt_msgtype_release(zops);
}
int __init zcrypt_pcixcc_init(void)