ARM: nomadik: move GPIO and pinctrl to device tree
This moves the instances of the Nomadik pin controller and the
Nomadik GPIO blocks (also handled by the GPIO driver) over to
the device tree. A new compatible string is added to the
pin control driver in the process.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index c73df37..2c8aaa5 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -35,6 +35,58 @@
interrupts = <5>;
};
+ gpio0: gpio@101e4000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e4000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
+ };
+
+ gpio1: gpio@101e5000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e5000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
+ };
+
+ gpio2: gpio@101e6000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e6000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
+ };
+
+ gpio3: gpio@101e7000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e7000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <9>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
+ };
+
+ pinctrl {
+ compatible = "stericsson,nmk-pinctrl-stn8815";
+ };
+
/* A NAND flash of 128 MiB */
fsmc: flash@40000000 {
compatible = "stericsson,fsmc-nand";
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index a3894ca..3a59459 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -153,13 +153,15 @@
/* No custom data yet */
};
+ /* For e.g. device tree boots */
+ if (!machine_is_nomadik())
+ return 0;
+
cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
IRQ_GPIO0, &pdata);
cpu8815_add_pinctrl(NULL, "pinctrl-stn8815");
- if (machine_is_nomadik()) {
- amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
- amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
- }
+ amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
return 0;
}
arch_initcall(cpu8815_init);
@@ -263,6 +265,16 @@
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
+ "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
+ "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
+ "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
+ "gpio.3", NULL),
+ OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
+ "pinctrl-stn8815", NULL),
OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
"uart0", NULL),
OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
@@ -283,6 +295,7 @@
/* At full speed latency must be >=2, so 0x249 in low bits */
l2x0_of_init(0x00730249, 0xfe000fff);
#endif
+ pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
of_platform_populate(NULL, of_default_bus_match_table,
cpu8815_auxdata_lookup, NULL);
}
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 1bb16ff..ef21a66 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -1846,6 +1846,10 @@
static const struct of_device_id nmk_pinctrl_match[] = {
{
+ .compatible = "stericsson,nmk-pinctrl-stn8815",
+ .data = (void *)PINCTRL_NMK_STN8815,
+ },
+ {
.compatible = "stericsson,nmk_pinctrl",
.data = (void *)PINCTRL_NMK_DB8500,
},