iwlwifi: choose thermal throttle method based on device config
Using device configuration structure to decide the type of thermal
throttle method for the device.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 5211872..0873322 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -277,6 +277,7 @@
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6000h_2abg_cfg = {
@@ -304,6 +305,7 @@
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6000h_2bg_cfg = {
@@ -331,6 +333,7 @@
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
/*
@@ -362,6 +365,7 @@
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
@@ -389,6 +393,7 @@
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
@@ -416,6 +421,7 @@
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6050_2agn_cfg = {
@@ -444,6 +450,7 @@
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
@@ -471,6 +478,7 @@
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
@@ -499,6 +507,7 @@
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
struct iwl_cfg iwl6050_3agn_cfg = {
@@ -527,6 +536,7 @@
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
+ .adv_thermal_throttle = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index a2d526a..9dbf598 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -225,6 +225,7 @@
* The detail algorithm is described in iwl-led.c
* @use_rts_for_ht: use rts/cts protection for HT traffic
* @chain_noise_num_beacons: number of beacons used to compute chain noise
+ * @adv_thermal_throttle: support advance thermal throttle
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -278,6 +279,7 @@
bool use_rts_for_ht;
int chain_noise_num_beacons;
const bool supports_idle;
+ bool adv_thermal_throttle;
};
/***************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 150ff87..432f465 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -893,9 +893,7 @@
INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
- switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
- case CSR_HW_REV_TYPE_6x00:
- case CSR_HW_REV_TYPE_6x50:
+ if (priv->cfg->adv_thermal_throttle) {
IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
IWL_TI_STATE_MAX, GFP_KERNEL);
@@ -928,11 +926,9 @@
&restriction_range[0], size);
priv->thermal_throttle.advanced_tt = true;
}
- break;
- default:
+ } else {
IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
priv->thermal_throttle.advanced_tt = false;
- break;
}
}
EXPORT_SYMBOL(iwl_tt_initialize);