[MTD] NAND: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 754b6ed..de45003 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -3,7 +3,7 @@
*
* Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org>
*
- * Copyright (C) 2004 Nokia Corporation
+ * Copyright (C) 2004 Nokia Corporation
*
* Note: NS means "NAND Simulator".
* Note: Input means input TO flash chip, output means output FROM chip.
@@ -126,7 +126,7 @@
/* The largest possible page size */
#define NS_LARGEST_PAGE_SIZE 2048
-
+
/* The prefix for simulator output */
#define NS_OUTPUT_PREFIX "[nandsim]"
@@ -145,7 +145,7 @@
do { if (do_delays) udelay(us); } while(0)
#define NS_MDELAY(us) \
do { if (do_delays) mdelay(us); } while(0)
-
+
/* Is the nandsim structure initialized ? */
#define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0)
@@ -153,12 +153,12 @@
#define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0)))
/* Operation failed completion status */
-#define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns))
+#define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns))
/* Calculate the page offset in flash RAM image by (row, column) address */
#define NS_RAW_OFFSET(ns) \
(((ns)->regs.row << (ns)->geom.pgshift) + ((ns)->regs.row * (ns)->geom.oobsz) + (ns)->regs.column)
-
+
/* Calculate the OOB offset in flash RAM image by (row, column) address */
#define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
@@ -223,15 +223,15 @@
/* Remove action bits ftom state */
#define NS_STATE(x) ((x) & ~ACTION_MASK)
-
-/*
+
+/*
* Maximum previous states which need to be saved. Currently saving is
* only needed for page programm operation with preceeded read command
* (which is only valid for 512-byte pages).
*/
#define NS_MAX_PREVSTATES 1
-/*
+/*
* The structure which describes all the internal simulator data.
*/
struct nandsim {
@@ -242,7 +242,7 @@
uint32_t options; /* chip's characteristic bits */
uint32_t state; /* current chip state */
uint32_t nxstate; /* next expected state */
-
+
uint32_t *op; /* current operation, NULL operations isn't known yet */
uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */
uint16_t npstates; /* number of previous states saved */
@@ -413,7 +413,7 @@
ns->geom.secaddrbytes = 3;
}
}
-
+
/* Detect how many ID bytes the NAND chip outputs */
for (i = 0; nand_flash_ids[i].name != NULL; i++) {
if (second_id_byte != nand_flash_ids[i].id)
@@ -444,7 +444,7 @@
#ifdef CONFIG_NS_ABS_POS
ns->mem.byte = ioremap(CONFIG_NS_ABS_POS, ns->geom.totszoob);
if (!ns->mem.byte) {
- NS_ERR("init_nandsim: failed to map the NAND flash image at address %p\n",
+ NS_ERR("init_nandsim: failed to map the NAND flash image at address %p\n",
(void *)CONFIG_NS_ABS_POS);
return -ENOMEM;
}
@@ -567,7 +567,7 @@
check_command(int cmd)
{
switch (cmd) {
-
+
case NAND_CMD_READ0:
case NAND_CMD_READSTART:
case NAND_CMD_PAGEPROG:
@@ -580,7 +580,7 @@
case NAND_CMD_RESET:
case NAND_CMD_READ1:
return 0;
-
+
case NAND_CMD_STATUS_MULTI:
default:
return 1;
@@ -631,7 +631,7 @@
accept_addr_byte(struct nandsim *ns, u_char bt)
{
uint byte = (uint)bt;
-
+
if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes))
ns->regs.column |= (byte << 8 * ns->regs.count);
else {
@@ -642,11 +642,11 @@
return;
}
-
+
/*
* Switch to STATE_READY state.
*/
-static inline void
+static inline void
switch_to_ready_state(struct nandsim *ns, u_char status)
{
NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY));
@@ -675,7 +675,7 @@
* (for example program from the second half and read from the
* second half operations both begin with the READ1 command). In this
* case the ns->pstates[] array contains previous states.
- *
+ *
* Thus, the function tries to find operation containing the following
* states (if the 'flag' parameter is 0):
* ns->pstates[0], ... ns->pstates[ns->npstates], ns->state
@@ -683,7 +683,7 @@
* If (one and only one) matching operation is found, it is accepted (
* ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
* zeroed).
- *
+ *
* If there are several maches, the current state is pushed to the
* ns->pstates.
*
@@ -692,7 +692,7 @@
* In such situation the function is called with 'flag' != 0, and the
* operation is searched using the following pattern:
* ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
- *
+ *
* It is supposed that this pattern must either match one operation on
* none. There can't be ambiguity in that case.
*
@@ -711,15 +711,15 @@
{
int opsfound = 0;
int i, j, idx = 0;
-
+
for (i = 0; i < NS_OPER_NUM; i++) {
int found = 1;
-
+
if (!(ns->options & ops[i].reqopts))
/* Ignore operations we can't perform */
continue;
-
+
if (flag) {
if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK))
continue;
@@ -728,7 +728,7 @@
continue;
}
- for (j = 0; j < ns->npstates; j++)
+ for (j = 0; j < ns->npstates; j++)
if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j])
&& (ns->options & ops[idx].reqopts)) {
found = 0;
@@ -745,7 +745,7 @@
/* Exact match */
ns->op = &ops[idx].states[0];
if (flag) {
- /*
+ /*
* In this case the find_operation function was
* called when address has just began input. But it isn't
* yet fully input and the current state must
@@ -763,7 +763,7 @@
idx, get_state_name(ns->state), get_state_name(ns->nxstate));
return 0;
}
-
+
if (opsfound == 0) {
/* Nothing was found. Try to ignore previous commands (if any) and search again */
if (ns->npstates != 0) {
@@ -777,13 +777,13 @@
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return -2;
}
-
+
if (flag) {
/* This shouldn't happen */
NS_DBG("find_operation: BUG, operation must be known if address is input\n");
return -2;
}
-
+
NS_DBG("find_operation: there is still ambiguity\n");
ns->pstates[ns->npstates++] = ns->state;
@@ -803,7 +803,7 @@
int busdiv = ns->busw == 8 ? 1 : 2;
action &= ACTION_MASK;
-
+
/* Check that page address input is correct */
if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) {
NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row);
@@ -827,14 +827,14 @@
NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
num, NS_RAW_OFFSET(ns) + ns->regs.off);
-
+
if (ns->regs.off == 0)
NS_LOG("read page %d\n", ns->regs.row);
else if (ns->regs.off < ns->geom.pgsz)
NS_LOG("read page %d (second half)\n", ns->regs.row);
else
NS_LOG("read OOB of page %d\n", ns->regs.row);
-
+
NS_UDELAY(access_delay);
NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv);
@@ -844,30 +844,30 @@
/*
* Erase sector.
*/
-
+
if (ns->lines.wp) {
NS_ERR("do_state_action: device is write-protected, ignore sector erase\n");
return -1;
}
-
+
if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec
|| (ns->regs.row & ~(ns->geom.secsz - 1))) {
NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row);
return -1;
}
-
+
ns->regs.row = (ns->regs.row <<
8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column;
ns->regs.column = 0;
-
+
NS_DBG("do_state_action: erase sector at address %#x, off = %d\n",
ns->regs.row, NS_RAW_OFFSET(ns));
NS_LOG("erase sector %d\n", ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift));
memset(ns->mem.byte + NS_RAW_OFFSET(ns), 0xFF, ns->geom.secszoob);
-
+
NS_MDELAY(erase_delay);
-
+
break;
case ACTION_PRGPAGE:
@@ -893,12 +893,12 @@
NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
NS_LOG("programm page %d\n", ns->regs.row);
-
+
NS_UDELAY(programm_delay);
NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv);
-
+
break;
-
+
case ACTION_ZEROOFF:
NS_DBG("do_state_action: set internal offset to 0\n");
ns->regs.off = 0;
@@ -918,7 +918,7 @@
NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz);
ns->regs.off = ns->geom.pgsz;
break;
-
+
default:
NS_DBG("do_state_action: BUG! unknown action\n");
}
@@ -937,7 +937,7 @@
* The current operation have already been identified.
* Just follow the states chain.
*/
-
+
ns->stateidx += 1;
ns->state = ns->nxstate;
ns->nxstate = ns->op[ns->stateidx + 1];
@@ -951,14 +951,14 @@
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
-
+
} else {
/*
* We don't yet know which operation we perform.
* Try to identify it.
*/
- /*
+ /*
* The only event causing the switch_state function to
* be called with yet unknown operation is new command.
*/
@@ -987,7 +987,7 @@
*/
u_char status = NS_STATUS_OK(ns);
-
+
/* In case of data states, see if all bytes were input/output */
if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK))
&& ns->regs.count != ns->regs.num) {
@@ -995,17 +995,17 @@
ns->regs.num - ns->regs.count);
status = NS_STATUS_FAILED(ns);
}
-
+
NS_DBG("switch_state: operation complete, switch to STATE_READY state\n");
switch_to_ready_state(ns, status);
return;
} else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) {
- /*
+ /*
* If the next state is data input/output, switch to it now
*/
-
+
ns->state = ns->nxstate;
ns->nxstate = ns->op[++ns->stateidx + 1];
ns->regs.num = ns->regs.count = 0;
@@ -1023,16 +1023,16 @@
case STATE_DATAOUT:
ns->regs.num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
break;
-
+
case STATE_DATAOUT_ID:
ns->regs.num = ns->geom.idbytes;
break;
-
+
case STATE_DATAOUT_STATUS:
case STATE_DATAOUT_STATUS_M:
ns->regs.count = ns->regs.num = 0;
break;
-
+
default:
NS_ERR("switch_state: BUG! unknown data state\n");
}
@@ -1044,16 +1044,16 @@
*/
ns->regs.count = 0;
-
+
switch (NS_STATE(ns->nxstate)) {
case STATE_ADDR_PAGE:
ns->regs.num = ns->geom.pgaddrbytes;
-
+
break;
case STATE_ADDR_SEC:
ns->regs.num = ns->geom.secaddrbytes;
break;
-
+
case STATE_ADDR_ZERO:
ns->regs.num = 1;
break;
@@ -1062,7 +1062,7 @@
NS_ERR("switch_state: BUG! unknown address state\n");
}
} else {
- /*
+ /*
* Just reset internal counters.
*/
@@ -1184,7 +1184,7 @@
default:
BUG();
}
-
+
if (ns->regs.count == ns->regs.num) {
NS_DBG("read_byte: all bytes were read\n");
@@ -1201,9 +1201,9 @@
}
else if (NS_STATE(ns->nxstate) == STATE_READY)
switch_state(ns);
-
+
}
-
+
return outb;
}
@@ -1211,7 +1211,7 @@
ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
-
+
/* Sanity and correctness checks */
if (!ns->lines.ce) {
NS_ERR("write_byte: chip is disabled, ignore write\n");
@@ -1221,7 +1221,7 @@
NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n");
return;
}
-
+
if (ns->lines.cle == 1) {
/*
* The byte written is a command.
@@ -1233,7 +1233,7 @@
return;
}
- /*
+ /*
* Chip might still be in STATE_DATAOUT
* (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
* STATE_DATAOUT_STATUS_M state. If so, switch state.
@@ -1254,13 +1254,13 @@
"ignore previous states\n", (uint)byte, get_state_name(ns->nxstate));
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
}
-
+
/* Check that the command byte is correct */
if (check_command(byte)) {
NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
return;
}
-
+
NS_DBG("command byte corresponding to %s state accepted\n",
get_state_name(get_state_by_command(byte)));
ns->regs.command = byte;
@@ -1277,12 +1277,12 @@
if (find_operation(ns, 1) < 0)
return;
-
+
if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
-
+
ns->regs.count = 0;
switch (NS_STATE(ns->nxstate)) {
case STATE_ADDR_PAGE:
@@ -1306,7 +1306,7 @@
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
-
+
/* Check if this is expected byte */
if (ns->regs.count == ns->regs.num) {
NS_ERR("write_byte: no more address bytes expected\n");
@@ -1325,12 +1325,12 @@
NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column);
switch_state(ns);
}
-
+
} else {
/*
* The byte written is an input data.
*/
-
+
/* Check that chip is expecting data input */
if (!(ns->state & STATE_DATAIN_MASK)) {
NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, "
@@ -1372,7 +1372,7 @@
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
NS_DBG("read_word\n");
-
+
return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8);
}
@@ -1380,14 +1380,14 @@
ns_nand_write_word(struct mtd_info *mtd, uint16_t word)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-
+
NS_DBG("write_word\n");
-
+
chip->write_byte(mtd, word & 0xFF);
chip->write_byte(mtd, word >> 8);
}
-static void
+static void
ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
@@ -1409,13 +1409,13 @@
memcpy(ns->buf.byte + ns->regs.count, buf, len);
ns->regs.count += len;
-
+
if (ns->regs.count == ns->regs.num) {
NS_DBG("write_buf: %d bytes were written\n", ns->regs.count);
}
}
-static void
+static void
ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
@@ -1453,7 +1453,7 @@
memcpy(buf, ns->buf.byte + ns->regs.count, len);
ns->regs.count += len;
-
+
if (ns->regs.count == ns->regs.num) {
if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
ns->regs.count = 0;
@@ -1465,11 +1465,11 @@
else if (NS_STATE(ns->nxstate) == STATE_READY)
switch_state(ns);
}
-
+
return;
}
-static int
+static int
ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
ns_nand_read_buf(mtd, (u_char *)&ns_verify_buf[0], len);
@@ -1496,7 +1496,7 @@
NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
return -EINVAL;
}
-
+
/* Allocate and initialize mtd_info, nand_chip and nandsim structures */
nsmtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
+ sizeof(struct nandsim), GFP_KERNEL);
@@ -1509,7 +1509,7 @@
chip = (struct nand_chip *)(nsmtd + 1);
nsmtd->priv = (void *)chip;
nand = (struct nandsim *)(chip + 1);
- chip->priv = (void *)nand;
+ chip->priv = (void *)nand;
/*
* Register simulator's callbacks.
@@ -1526,9 +1526,9 @@
chip->eccmode = NAND_ECC_SOFT;
chip->options |= NAND_SKIP_BBTSCAN;
- /*
+ /*
* Perform minimum nandsim structure initialization to handle
- * the initial ID read command correctly
+ * the initial ID read command correctly
*/
if (third_id_byte != 0xFF || fourth_id_byte != 0xFF)
nand->geom.idbytes = 4;
@@ -1557,7 +1557,7 @@
NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
goto error;
}
-
+
if ((retval = nand_default_bbt(nsmtd)) != 0) {
free_nandsim(nand);
goto error;