|  | /******************************************************************* | 
|  | * This file is part of the Emulex Linux Device Driver for         * | 
|  | * Fibre Channel Host Bus Adapters.                                * | 
|  | * Copyright (C) 2004-2008 Emulex.  All rights reserved.           * | 
|  | * EMULEX and SLI are trademarks of Emulex.                        * | 
|  | * www.emulex.com                                                  * | 
|  | *                                                                 * | 
|  | * This program is free software; you can redistribute it and/or   * | 
|  | * modify it under the terms of version 2 of the GNU General       * | 
|  | * Public License as published by the Free Software Foundation.    * | 
|  | * This program is distributed in the hope that it will be useful. * | 
|  | * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          * | 
|  | * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  * | 
|  | * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      * | 
|  | * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | 
|  | * TO BE LEGALLY INVALID.  See the GNU General Public License for  * | 
|  | * more details, a copy of which can be found in the file COPYING  * | 
|  | * included with this package.                                     * | 
|  | *******************************************************************/ | 
|  |  | 
|  | #define FC_MAX_HOLD_RSCN     32	      /* max number of deferred RSCNs */ | 
|  | #define FC_MAX_NS_RSP        65536    /* max size NameServer rsp */ | 
|  | #define FC_MAXLOOP           126      /* max devices supported on a fc loop */ | 
|  | #define LPFC_DISC_FLOGI_TMO  10	      /* Discovery FLOGI ratov */ | 
|  |  | 
|  |  | 
|  | /* This is the protocol dependent definition for a Node List Entry. | 
|  | * This is used by Fibre Channel protocol to support FCP. | 
|  | */ | 
|  |  | 
|  | /* worker thread events */ | 
|  | enum lpfc_work_type { | 
|  | LPFC_EVT_ONLINE, | 
|  | LPFC_EVT_OFFLINE_PREP, | 
|  | LPFC_EVT_OFFLINE, | 
|  | LPFC_EVT_WARM_START, | 
|  | LPFC_EVT_KILL, | 
|  | LPFC_EVT_ELS_RETRY, | 
|  | LPFC_EVT_DEV_LOSS, | 
|  | LPFC_EVT_FASTPATH_MGMT_EVT, | 
|  | }; | 
|  |  | 
|  | /* structure used to queue event to the discovery tasklet */ | 
|  | struct lpfc_work_evt { | 
|  | struct list_head      evt_listp; | 
|  | void                 *evt_arg1; | 
|  | void                 *evt_arg2; | 
|  | enum lpfc_work_type   evt; | 
|  | }; | 
|  |  | 
|  | struct lpfc_scsi_check_condition_event; | 
|  | struct lpfc_scsi_varqueuedepth_event; | 
|  | struct lpfc_scsi_event_header; | 
|  | struct lpfc_fabric_event_header; | 
|  | struct lpfc_fcprdchkerr_event; | 
|  |  | 
|  | /* structure used for sending events from fast path */ | 
|  | struct lpfc_fast_path_event { | 
|  | struct lpfc_work_evt work_evt; | 
|  | struct lpfc_vport     *vport; | 
|  | union { | 
|  | struct lpfc_scsi_check_condition_event check_cond_evt; | 
|  | struct lpfc_scsi_varqueuedepth_event queue_depth_evt; | 
|  | struct lpfc_scsi_event_header scsi_evt; | 
|  | struct lpfc_fabric_event_header fabric_evt; | 
|  | struct lpfc_fcprdchkerr_event read_check_error; | 
|  | } un; | 
|  | }; | 
|  |  | 
|  | struct lpfc_nodelist { | 
|  | struct list_head nlp_listp; | 
|  | struct lpfc_name nlp_portname; | 
|  | struct lpfc_name nlp_nodename; | 
|  | uint32_t         nlp_flag;		/* entry  flags */ | 
|  | uint32_t         nlp_DID;		/* FC D_ID of entry */ | 
|  | uint32_t         nlp_last_elscmd;	/* Last ELS cmd sent */ | 
|  | uint16_t         nlp_type; | 
|  | #define NLP_FC_NODE        0x1			/* entry is an FC node */ | 
|  | #define NLP_FABRIC         0x4			/* entry rep a Fabric entity */ | 
|  | #define NLP_FCP_TARGET     0x8			/* entry is an FCP target */ | 
|  | #define NLP_FCP_INITIATOR  0x10			/* entry is an FCP Initiator */ | 
|  |  | 
|  | uint16_t        nlp_rpi; | 
|  | uint16_t        nlp_state;		/* state transition indicator */ | 
|  | uint16_t        nlp_prev_state;		/* state transition indicator */ | 
|  | uint16_t        nlp_xri;		/* output exchange id for RPI */ | 
|  | uint16_t        nlp_sid;		/* scsi id */ | 
|  | #define NLP_NO_SID		0xffff | 
|  | uint16_t	nlp_maxframe;		/* Max RCV frame size */ | 
|  | uint8_t		nlp_class_sup;		/* Supported Classes */ | 
|  | uint8_t         nlp_retry;		/* used for ELS retries */ | 
|  | uint8_t         nlp_fcp_info;	        /* class info, bits 0-3 */ | 
|  | #define NLP_FCP_2_DEVICE   0x10			/* FCP-2 device */ | 
|  |  | 
|  | uint16_t        nlp_usg_map;	/* ndlp management usage bitmap */ | 
|  | #define NLP_USG_NODE_ACT_BIT	0x1	/* Indicate ndlp is actively used */ | 
|  | #define NLP_USG_IACT_REQ_BIT	0x2	/* Request to inactivate ndlp */ | 
|  | #define NLP_USG_FREE_REQ_BIT	0x4	/* Request to invoke ndlp memory free */ | 
|  | #define NLP_USG_FREE_ACK_BIT	0x8	/* Indicate ndlp memory free invoked */ | 
|  |  | 
|  | struct timer_list   nlp_delayfunc;	/* Used for delayed ELS cmds */ | 
|  | struct lpfc_hba *phba; | 
|  | struct fc_rport *rport;			/* Corresponding FC transport | 
|  | port structure */ | 
|  | struct lpfc_vport *vport; | 
|  | struct lpfc_work_evt els_retry_evt; | 
|  | struct lpfc_work_evt dev_loss_evt; | 
|  | unsigned long last_ramp_up_time;        /* jiffy of last ramp up */ | 
|  | unsigned long last_q_full_time;		/* jiffy of last queue full */ | 
|  | struct kref     kref; | 
|  | atomic_t cmd_pending; | 
|  | uint32_t cmd_qdepth; | 
|  | unsigned long last_change_time; | 
|  | struct lpfc_scsicmd_bkt *lat_data;	/* Latency data */ | 
|  | }; | 
|  |  | 
|  | /* Defines for nlp_flag (uint32) */ | 
|  | #define NLP_PLOGI_SND      0x00000020	/* sent PLOGI request for this entry */ | 
|  | #define NLP_PRLI_SND       0x00000040	/* sent PRLI request for this entry */ | 
|  | #define NLP_ADISC_SND      0x00000080	/* sent ADISC request for this entry */ | 
|  | #define NLP_LOGO_SND       0x00000100	/* sent LOGO request for this entry */ | 
|  | #define NLP_RNID_SND       0x00000400	/* sent RNID request for this entry */ | 
|  | #define NLP_ELS_SND_MASK   0x000007e0	/* sent ELS request for this entry */ | 
|  | #define NLP_DEFER_RM       0x00010000	/* Remove this ndlp if no longer used */ | 
|  | #define NLP_DELAY_TMO      0x00020000	/* delay timeout is running for node */ | 
|  | #define NLP_NPR_2B_DISC    0x00040000	/* node is included in num_disc_nodes */ | 
|  | #define NLP_RCV_PLOGI      0x00080000	/* Rcv'ed PLOGI from remote system */ | 
|  | #define NLP_LOGO_ACC       0x00100000	/* Process LOGO after ACC completes */ | 
|  | #define NLP_TGT_NO_SCSIID  0x00200000	/* good PRLI but no binding for scsid */ | 
|  | #define NLP_ACC_REGLOGIN   0x01000000	/* Issue Reg Login after successful | 
|  | ACC */ | 
|  | #define NLP_NPR_ADISC      0x02000000	/* Issue ADISC when dq'ed from | 
|  | NPR list */ | 
|  | #define NLP_RM_DFLT_RPI    0x04000000	/* need to remove leftover dflt RPI */ | 
|  | #define NLP_NODEV_REMOVE   0x08000000	/* Defer removal till discovery ends */ | 
|  | #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */ | 
|  | #define NLP_SC_REQ         0x20000000	/* Target requires authentication */ | 
|  | #define NLP_RPI_VALID      0x80000000	/* nlp_rpi is valid */ | 
|  |  | 
|  | /* ndlp usage management macros */ | 
|  | #define NLP_CHK_NODE_ACT(ndlp)		(((ndlp)->nlp_usg_map \ | 
|  | & NLP_USG_NODE_ACT_BIT) \ | 
|  | && \ | 
|  | !((ndlp)->nlp_usg_map \ | 
|  | & NLP_USG_FREE_ACK_BIT)) | 
|  | #define NLP_SET_NODE_ACT(ndlp)		((ndlp)->nlp_usg_map \ | 
|  | |= NLP_USG_NODE_ACT_BIT) | 
|  | #define NLP_INT_NODE_ACT(ndlp)		((ndlp)->nlp_usg_map \ | 
|  | = NLP_USG_NODE_ACT_BIT) | 
|  | #define NLP_CLR_NODE_ACT(ndlp)		((ndlp)->nlp_usg_map \ | 
|  | &= ~NLP_USG_NODE_ACT_BIT) | 
|  | #define NLP_CHK_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \ | 
|  | & NLP_USG_IACT_REQ_BIT) | 
|  | #define NLP_SET_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \ | 
|  | |= NLP_USG_IACT_REQ_BIT) | 
|  | #define NLP_CHK_FREE_REQ(ndlp)		((ndlp)->nlp_usg_map \ | 
|  | & NLP_USG_FREE_REQ_BIT) | 
|  | #define NLP_SET_FREE_REQ(ndlp)		((ndlp)->nlp_usg_map \ | 
|  | |= NLP_USG_FREE_REQ_BIT) | 
|  | #define NLP_CHK_FREE_ACK(ndlp)		((ndlp)->nlp_usg_map \ | 
|  | & NLP_USG_FREE_ACK_BIT) | 
|  | #define NLP_SET_FREE_ACK(ndlp)		((ndlp)->nlp_usg_map \ | 
|  | |= NLP_USG_FREE_ACK_BIT) | 
|  |  | 
|  | /* There are 4 different double linked lists nodelist entries can reside on. | 
|  | * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used | 
|  | * when Link Up discovery or Registered State Change Notification (RSCN) | 
|  | * processing is needed.  Each list holds the nodes that require a PLOGI or | 
|  | * ADISC Extended Link Service (ELS) request.  These lists keep track of the | 
|  | * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected | 
|  | * by Link Up) event.  The unmapped_list contains all nodes that have | 
|  | * successfully logged into at the Fibre Channel level.  The | 
|  | * mapped_list will contain all nodes that are mapped FCP targets. | 
|  | * | 
|  | * The bind list is a list of undiscovered (potentially non-existent) nodes | 
|  | * that we have saved binding information on. This information is used when | 
|  | * nodes transition from the unmapped to the mapped list. | 
|  | */ | 
|  |  | 
|  | /* Defines for nlp_state */ | 
|  | #define NLP_STE_UNUSED_NODE       0x0	/* node is just allocated */ | 
|  | #define NLP_STE_PLOGI_ISSUE       0x1	/* PLOGI was sent to NL_PORT */ | 
|  | #define NLP_STE_ADISC_ISSUE       0x2	/* ADISC was sent to NL_PORT */ | 
|  | #define NLP_STE_REG_LOGIN_ISSUE   0x3	/* REG_LOGIN was issued for NL_PORT */ | 
|  | #define NLP_STE_PRLI_ISSUE        0x4	/* PRLI was sent to NL_PORT */ | 
|  | #define NLP_STE_UNMAPPED_NODE     0x5	/* PRLI completed from NL_PORT */ | 
|  | #define NLP_STE_MAPPED_NODE       0x6	/* Identified as a FCP Target */ | 
|  | #define NLP_STE_NPR_NODE          0x7	/* NPort disappeared */ | 
|  | #define NLP_STE_MAX_STATE         0x8 | 
|  | #define NLP_STE_FREED_NODE        0xff	/* node entry was freed to MEM_NLP */ | 
|  |  | 
|  | /* For UNUSED_NODE state, the node has just been allocated. | 
|  | * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on | 
|  | * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list | 
|  | * and put on the unmapped list. For ADISC processing, the node is taken off | 
|  | * the ADISC list and placed on either the mapped or unmapped list (depending | 
|  | * on its previous state). Once on the unmapped list, a PRLI is issued and the | 
|  | * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is | 
|  | * changed to PRLI_COMPL. If the completion indicates a mapped | 
|  | * node, the node is taken off the unmapped list. The binding list is checked | 
|  | * for a valid binding, or a binding is automatically assigned. If binding | 
|  | * assignment is unsuccessful, the node is left on the unmapped list. If | 
|  | * binding assignment is successful, the associated binding list entry (if | 
|  | * any) is removed, and the node is placed on the mapped list. | 
|  | */ | 
|  | /* | 
|  | * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped | 
|  | * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers | 
|  | * expire, all effected nodes will receive a DEVICE_RM event. | 
|  | */ | 
|  | /* | 
|  | * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists | 
|  | * to either the ADISC or PLOGI list.  After a Nameserver query or ALPA loopmap | 
|  | * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to / | 
|  | * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated, | 
|  | * we will first process the ADISC list.  32 entries are processed initially and | 
|  | * ADISC is initited for each one.  Completions / Events for each node are | 
|  | * funnelled thru the state machine.  As each node finishes ADISC processing, it | 
|  | * starts ADISC for any nodes waiting for ADISC processing. If no nodes are | 
|  | * waiting, and the ADISC list count is identically 0, then we are done. For | 
|  | * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we | 
|  | * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI | 
|  | * list.  32 entries are processed initially and PLOGI is initited for each one. | 
|  | * Completions / Events for each node are funnelled thru the state machine.  As | 
|  | * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting | 
|  | * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is | 
|  | * identically 0, then we are done. We have now completed discovery / RSCN | 
|  | * handling. Upon completion, ALL nodes should be on either the mapped or | 
|  | * unmapped lists. | 
|  | */ | 
|  |  | 
|  | /* Defines for Node List Entry Events that could happen */ | 
|  | #define NLP_EVT_RCV_PLOGI         0x0	/* Rcv'd an ELS PLOGI command */ | 
|  | #define NLP_EVT_RCV_PRLI          0x1	/* Rcv'd an ELS PRLI  command */ | 
|  | #define NLP_EVT_RCV_LOGO          0x2	/* Rcv'd an ELS LOGO  command */ | 
|  | #define NLP_EVT_RCV_ADISC         0x3	/* Rcv'd an ELS ADISC command */ | 
|  | #define NLP_EVT_RCV_PDISC         0x4	/* Rcv'd an ELS PDISC command */ | 
|  | #define NLP_EVT_RCV_PRLO          0x5	/* Rcv'd an ELS PRLO  command */ | 
|  | #define NLP_EVT_CMPL_PLOGI        0x6	/* Sent an ELS PLOGI command */ | 
|  | #define NLP_EVT_CMPL_PRLI         0x7	/* Sent an ELS PRLI  command */ | 
|  | #define NLP_EVT_CMPL_LOGO         0x8	/* Sent an ELS LOGO  command */ | 
|  | #define NLP_EVT_CMPL_ADISC        0x9	/* Sent an ELS ADISC command */ | 
|  | #define NLP_EVT_CMPL_REG_LOGIN    0xa	/* REG_LOGIN mbox cmd completed */ | 
|  | #define NLP_EVT_DEVICE_RM         0xb	/* Device not found in NS / ALPAmap */ | 
|  | #define NLP_EVT_DEVICE_RECOVERY   0xc	/* Device existence unknown */ | 
|  | #define NLP_EVT_MAX_EVENT         0xd | 
|  |  |