| /* | 
 |  * IXP2400 MSF network device driver for the Radisys ENP2611 | 
 |  * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> | 
 |  * Dedicated to Marija Kulikova. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/init.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <asm/hardware/uengine.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/io.h> | 
 | #include "ixpdev.h" | 
 | #include "caleb.h" | 
 | #include "ixp2400-msf.h" | 
 | #include "pm3386.h" | 
 |  | 
 | /*********************************************************************** | 
 |  * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC | 
 |  * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA | 
 |  * to the IXP2400. | 
 |  * | 
 |  *                +-------------+ | 
 |  * SFP GBIC #0 ---+             |       +---------+ | 
 |  *                |  PM3386 #0  +-------+         | | 
 |  * SFP GBIC #1 ---+             |       | "Caleb" |         +---------+ | 
 |  *                +-------------+       |         |         |         | | 
 |  *                                      | SPI-3   +---------+ IXP2400 | | 
 |  *                +-------------+       | bridge  |         |         | | 
 |  * SFP GBIC #2 ---+             |       | FPGA    |         +---------+ | 
 |  *                |  PM3386 #1  +-------+         | | 
 |  *                |             |       +---------+ | 
 |  *                +-------------+ | 
 |  *              ^                   ^                  ^ | 
 |  *              | 1.25Gbaud         | 104MHz           | 104MHz | 
 |  *              | SERDES ea.        | SPI-3 ea.        | SPI-3 | 
 |  * | 
 |  ***********************************************************************/ | 
 | static struct ixp2400_msf_parameters enp2611_msf_parameters = | 
 | { | 
 | 	.rx_mode =		IXP2400_RX_MODE_UTOPIA_POS | | 
 | 				IXP2400_RX_MODE_1x32 | | 
 | 				IXP2400_RX_MODE_MPHY | | 
 | 				IXP2400_RX_MODE_MPHY_32 | | 
 | 				IXP2400_RX_MODE_MPHY_POLLED_STATUS | | 
 | 				IXP2400_RX_MODE_MPHY_LEVEL3 | | 
 | 				IXP2400_RX_MODE_RBUF_SIZE_64, | 
 |  | 
 | 	.rxclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16, | 
 |  | 
 | 	.rx_poll_ports =	3, | 
 |  | 
 | 	.rx_channel_mode = { | 
 | 		IXP2400_PORT_RX_MODE_MASTER | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
 | 		IXP2400_PORT_RX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, | 
 |  | 
 | 		IXP2400_PORT_RX_MODE_MASTER | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
 | 		IXP2400_PORT_RX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, | 
 |  | 
 | 		IXP2400_PORT_RX_MODE_MASTER | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
 | 		IXP2400_PORT_RX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, | 
 |  | 
 | 		IXP2400_PORT_RX_MODE_MASTER | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
 | 		IXP2400_PORT_RX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE | 
 | 	}, | 
 |  | 
 | 	.tx_mode =		IXP2400_TX_MODE_UTOPIA_POS | | 
 | 				IXP2400_TX_MODE_1x32 | | 
 | 				IXP2400_TX_MODE_MPHY | | 
 | 				IXP2400_TX_MODE_MPHY_32 | | 
 | 				IXP2400_TX_MODE_MPHY_POLLED_STATUS | | 
 | 				IXP2400_TX_MODE_MPHY_LEVEL3 | | 
 | 				IXP2400_TX_MODE_TBUF_SIZE_64, | 
 |  | 
 | 	.txclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16, | 
 |  | 
 | 	.tx_poll_ports =	3, | 
 |  | 
 | 	.tx_channel_mode = { | 
 | 		IXP2400_PORT_TX_MODE_MASTER | | 
 | 		IXP2400_PORT_TX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_TX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, | 
 |  | 
 | 		IXP2400_PORT_TX_MODE_MASTER | | 
 | 		IXP2400_PORT_TX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_TX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, | 
 |  | 
 | 		IXP2400_PORT_TX_MODE_MASTER | | 
 | 		IXP2400_PORT_TX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_TX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, | 
 |  | 
 | 		IXP2400_PORT_TX_MODE_MASTER | | 
 | 		IXP2400_PORT_TX_MODE_POS_PHY | | 
 | 		IXP2400_PORT_TX_MODE_ODD_PARITY | | 
 | 		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE | 
 | 	} | 
 | }; | 
 |  | 
 | static struct net_device *nds[3]; | 
 | static struct timer_list link_check_timer; | 
 |  | 
 | /* @@@ Poll the SFP moddef0 line too.  */ | 
 | /* @@@ Try to use the pm3386 DOOL interrupt as well.  */ | 
 | static void enp2611_check_link_status(unsigned long __dummy) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < 3; i++) { | 
 | 		struct net_device *dev; | 
 | 		int status; | 
 |  | 
 | 		dev = nds[i]; | 
 | 		if (dev == NULL) | 
 | 			continue; | 
 |  | 
 | 		status = pm3386_is_link_up(i); | 
 | 		if (status && !netif_carrier_ok(dev)) { | 
 | 			/* @@@ Should report autonegotiation status.  */ | 
 | 			printk(KERN_INFO "%s: NIC Link is Up\n", dev->name); | 
 |  | 
 | 			pm3386_enable_tx(i); | 
 | 			caleb_enable_tx(i); | 
 | 			netif_carrier_on(dev); | 
 | 		} else if (!status && netif_carrier_ok(dev)) { | 
 | 			printk(KERN_INFO "%s: NIC Link is Down\n", dev->name); | 
 |  | 
 | 			netif_carrier_off(dev); | 
 | 			caleb_disable_tx(i); | 
 | 			pm3386_disable_tx(i); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	link_check_timer.expires = jiffies + HZ / 10; | 
 | 	add_timer(&link_check_timer); | 
 | } | 
 |  | 
 | static void enp2611_set_port_admin_status(int port, int up) | 
 | { | 
 | 	if (up) { | 
 | 		caleb_enable_rx(port); | 
 |  | 
 | 		pm3386_set_carrier(port, 1); | 
 | 		pm3386_enable_rx(port); | 
 | 	} else { | 
 | 		caleb_disable_tx(port); | 
 | 		pm3386_disable_tx(port); | 
 | 		/* @@@ Flush out pending packets.  */ | 
 | 		pm3386_set_carrier(port, 0); | 
 |  | 
 | 		pm3386_disable_rx(port); | 
 | 		caleb_disable_rx(port); | 
 | 	} | 
 | } | 
 |  | 
 | static int __init enp2611_init_module(void) | 
 | {  | 
 | 	int ports; | 
 | 	int i; | 
 |  | 
 | 	if (!machine_is_enp2611()) | 
 | 		return -ENODEV; | 
 |  | 
 | 	caleb_reset(); | 
 | 	pm3386_reset(); | 
 |  | 
 | 	ports = pm3386_port_count(); | 
 | 	for (i = 0; i < ports; i++) { | 
 | 		nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv)); | 
 | 		if (nds[i] == NULL) { | 
 | 			while (--i >= 0) | 
 | 				free_netdev(nds[i]); | 
 | 			return -ENOMEM; | 
 | 		} | 
 |  | 
 | 		pm3386_init_port(i); | 
 | 		pm3386_get_mac(i, nds[i]->dev_addr); | 
 | 	} | 
 |  | 
 | 	ixp2400_msf_init(&enp2611_msf_parameters); | 
 |  | 
 | 	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) { | 
 | 		for (i = 0; i < ports; i++) | 
 | 			if (nds[i]) | 
 | 				free_netdev(nds[i]); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	init_timer(&link_check_timer); | 
 | 	link_check_timer.function = enp2611_check_link_status; | 
 | 	link_check_timer.expires = jiffies; | 
 | 	add_timer(&link_check_timer); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit enp2611_cleanup_module(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	del_timer_sync(&link_check_timer); | 
 |  | 
 | 	ixpdev_deinit(); | 
 | 	for (i = 0; i < 3; i++) | 
 | 		free_netdev(nds[i]); | 
 | } | 
 |  | 
 | module_init(enp2611_init_module); | 
 | module_exit(enp2611_cleanup_module); | 
 | MODULE_LICENSE("GPL"); |