[POWERPC] 4xx: Add 460EX PCIe support to 4xx pci driver
All this code is needed to properly initialize the 460EX PCIe host
bridge(s). We re-initialize all ports again, even though this has been done
in the bootloader (U-Boot) before. This way we make sure, that we always
run the latest init code in Linux and don't depend on code versions from
U-Boot.
Unfortunately all IBM/AMCC chips currently supported in this PCIe driver need
a different reset-/init-sequence.
Tested on AMCC Canyonlands eval board.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 1c07908..d04e40b 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -271,6 +271,59 @@
#define PESDR1_405EX_PHYSTA 0x044C
/*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST 0x0308
+#define PESDR0_460EX_L0BISTSTS 0x0309
+#define PESDR0_460EX_L0CDRCTL 0x030A
+#define PESDR0_460EX_L0DRV 0x030B
+#define PESDR0_460EX_L0REC 0x030C
+#define PESDR0_460EX_L0LPB 0x030D
+#define PESDR0_460EX_L0CLK 0x030E
+#define PESDR0_460EX_PHY_CTL_RST 0x030F
+#define PESDR0_460EX_RSTSTA 0x0310
+#define PESDR0_460EX_OBS 0x0311
+#define PESDR0_460EX_L0ERRC 0x0320
+
+#define PESDR1_460EX_L0BIST 0x0348
+#define PESDR1_460EX_L1BIST 0x0349
+#define PESDR1_460EX_L2BIST 0x034A
+#define PESDR1_460EX_L3BIST 0x034B
+#define PESDR1_460EX_L0BISTSTS 0x034C
+#define PESDR1_460EX_L1BISTSTS 0x034D
+#define PESDR1_460EX_L2BISTSTS 0x034E
+#define PESDR1_460EX_L3BISTSTS 0x034F
+#define PESDR1_460EX_L0CDRCTL 0x0350
+#define PESDR1_460EX_L1CDRCTL 0x0351
+#define PESDR1_460EX_L2CDRCTL 0x0352
+#define PESDR1_460EX_L3CDRCTL 0x0353
+#define PESDR1_460EX_L0DRV 0x0354
+#define PESDR1_460EX_L1DRV 0x0355
+#define PESDR1_460EX_L2DRV 0x0356
+#define PESDR1_460EX_L3DRV 0x0357
+#define PESDR1_460EX_L0REC 0x0358
+#define PESDR1_460EX_L1REC 0x0359
+#define PESDR1_460EX_L2REC 0x035A
+#define PESDR1_460EX_L3REC 0x035B
+#define PESDR1_460EX_L0LPB 0x035C
+#define PESDR1_460EX_L1LPB 0x035D
+#define PESDR1_460EX_L2LPB 0x035E
+#define PESDR1_460EX_L3LPB 0x035F
+#define PESDR1_460EX_L0CLK 0x0360
+#define PESDR1_460EX_L1CLK 0x0361
+#define PESDR1_460EX_L2CLK 0x0362
+#define PESDR1_460EX_L3CLK 0x0363
+#define PESDR1_460EX_PHY_CTL_RST 0x0364
+#define PESDR1_460EX_RSTSTA 0x0365
+#define PESDR1_460EX_OBS 0x0366
+#define PESDR1_460EX_L0ERRC 0x0368
+#define PESDR1_460EX_L1ERRC 0x0369
+#define PESDR1_460EX_L2ERRC 0x036A
+#define PESDR1_460EX_L3ERRC 0x036B
+#define PESDR0_460EX_IHS1 0x036C
+#define PESDR0_460EX_IHS2 0x036D
+
+/*
* Of the above, some are common offsets from the base
*/
#define PESDRn_UTLSET1 0x00
@@ -353,6 +406,12 @@
#define PECFG_POM2LAL 0x390
#define PECFG_POM2LAH 0x394
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB 0x10000000
+#define PESDRx_RCSSET_RSTGU 0x01000000
+#define PESDRx_RCSSET_RDY 0x00100000
+#define PESDRx_RCSSET_RSTDL 0x00010000
+#define PESDRx_RCSSET_RSTPYN 0x00001000
enum
{