PCI: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index e8aa138..7d770b2 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -321,14 +321,14 @@
if (!shpc_poll_ctrl_busy(ctrl)) {
/* After 1 sec and and the controller is still busy */
err("%s : Controller is still busy after 1 sec.\n",
- __FUNCTION__);
+ __func__);
retval = -EBUSY;
goto out;
}
++t_slot;
temp_word = (t_slot << 8) | (cmd & 0xFF);
- dbg("%s: t_slot %x cmd %x\n", __FUNCTION__, t_slot, cmd);
+ dbg("%s: t_slot %x cmd %x\n", __func__, t_slot, cmd);
/* To make sure the Controller Busy bit is 0 before we send out the
* command.
@@ -345,7 +345,7 @@
cmd_status = hpc_check_cmd_status(slot->ctrl);
if (cmd_status) {
err("%s: Failed to issued command 0x%x (error code = %d)\n",
- __FUNCTION__, cmd, cmd_status);
+ __func__, cmd, cmd_status);
retval = -EIO;
}
out:
@@ -364,15 +364,15 @@
break;
case 1:
retval = SWITCH_OPEN;
- err("%s: Switch opened!\n", __FUNCTION__);
+ err("%s: Switch opened!\n", __func__);
break;
case 2:
retval = INVALID_CMD;
- err("%s: Invalid HPC command!\n", __FUNCTION__);
+ err("%s: Invalid HPC command!\n", __func__);
break;
case 4:
retval = INVALID_SPEED_MODE;
- err("%s: Invalid bus speed/mode!\n", __FUNCTION__);
+ err("%s: Invalid bus speed/mode!\n", __func__);
break;
default:
retval = cmd_status;
@@ -484,7 +484,7 @@
}
dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
- __FUNCTION__, slot_reg, pcix_cap, m66_cap);
+ __func__, slot_reg, pcix_cap, m66_cap);
switch (pcix_cap) {
case 0x0:
@@ -629,7 +629,7 @@
retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
if (retval)
- err("%s: Write command failed!\n", __FUNCTION__);
+ err("%s: Write command failed!\n", __func__);
return retval;
}
@@ -642,7 +642,7 @@
retval = shpc_write_cmd(slot, slot->hp_slot,
SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
if (retval)
- err("%s: Write command failed!\n", __FUNCTION__);
+ err("%s: Write command failed!\n", __func__);
return retval;
}
@@ -655,7 +655,7 @@
retval = shpc_write_cmd(slot, slot->hp_slot,
SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
if (retval)
- err("%s: Write command failed!\n", __FUNCTION__);
+ err("%s: Write command failed!\n", __func__);
return retval;
}
@@ -719,7 +719,7 @@
retval = shpc_write_cmd(slot, 0, cmd);
if (retval)
- err("%s: Write command failed!\n", __FUNCTION__);
+ err("%s: Write command failed!\n", __func__);
return retval;
}
@@ -735,7 +735,7 @@
if (!intr_loc)
return IRQ_NONE;
- dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
+ dbg("%s: intr_loc = %x\n",__func__, intr_loc);
if(!shpchp_poll_mode) {
/*
@@ -748,7 +748,7 @@
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
intr_loc2 = shpc_readl(ctrl, INTR_LOC);
- dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
+ dbg("%s: intr_loc2 = %x\n",__func__, intr_loc2);
}
if (intr_loc & CMD_INTR_PENDING) {
@@ -774,7 +774,7 @@
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
dbg("%s: Slot %x with intr, slot register = %x\n",
- __FUNCTION__, hp_slot, slot_reg);
+ __func__, hp_slot, slot_reg);
if (slot_reg & MRL_CHANGE_DETECTED)
shpchp_handle_switch_change(hp_slot, ctrl);
@@ -958,33 +958,33 @@
} else {
ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
if (!ctrl->cap_offset) {
- err("%s : cap_offset == 0\n", __FUNCTION__);
+ err("%s : cap_offset == 0\n", __func__);
goto abort;
}
- dbg("%s: cap_offset = %x\n", __FUNCTION__, ctrl->cap_offset);
+ dbg("%s: cap_offset = %x\n", __func__, ctrl->cap_offset);
rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
if (rc) {
- err("%s: cannot read base_offset\n", __FUNCTION__);
+ err("%s: cannot read base_offset\n", __func__);
goto abort;
}
rc = shpc_indirect_read(ctrl, 3, &tempdword);
if (rc) {
- err("%s: cannot read slot config\n", __FUNCTION__);
+ err("%s: cannot read slot config\n", __func__);
goto abort;
}
num_slots = tempdword & SLOT_NUM;
- dbg("%s: num_slots (indirect) %x\n", __FUNCTION__, num_slots);
+ dbg("%s: num_slots (indirect) %x\n", __func__, num_slots);
for (i = 0; i < 9 + num_slots; i++) {
rc = shpc_indirect_read(ctrl, i, &tempdword);
if (rc) {
err("%s: cannot read creg (index = %d)\n",
- __FUNCTION__, i);
+ __func__, i);
goto abort;
}
- dbg("%s: offset %d: value %x\n", __FUNCTION__,i,
+ dbg("%s: offset %d: value %x\n", __func__,i,
tempdword);
}
@@ -998,25 +998,25 @@
rc = pci_enable_device(pdev);
if (rc) {
- err("%s: pci_enable_device failed\n", __FUNCTION__);
+ err("%s: pci_enable_device failed\n", __func__);
goto abort;
}
if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
- err("%s: cannot reserve MMIO region\n", __FUNCTION__);
+ err("%s: cannot reserve MMIO region\n", __func__);
rc = -1;
goto abort;
}
ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
if (!ctrl->creg) {
- err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__,
+ err("%s: cannot remap MMIO region %lx @ %lx\n", __func__,
ctrl->mmio_size, ctrl->mmio_base);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
rc = -1;
goto abort;
}
- dbg("%s: ctrl->creg %p\n", __FUNCTION__, ctrl->creg);
+ dbg("%s: ctrl->creg %p\n", __func__, ctrl->creg);
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->cmd_lock);
@@ -1035,20 +1035,20 @@
/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
+ dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK |
COMMAND_INTR_MASK | ARBITER_SERR_MASK);
tempdword &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
+ dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
/* Mask the MRL sensor SERR Mask of individual slot in
* Slot SERR-INT Mask & clear all the existing event if any
*/
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
+ dbg("%s: Default Logical Slot Register %d value %x\n", __func__,
hp_slot, slot_reg);
slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
@@ -1073,7 +1073,7 @@
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n",
- __FUNCTION__, ctrl->pci_dev->irq,
+ __func__, ctrl->pci_dev->irq,
atomic_read(&shpchp_num_controllers), rc);
if (rc) {
err("Can't get irq %d for the hotplug controller\n",
@@ -1081,7 +1081,7 @@
goto abort_iounmap;
}
}
- dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __FUNCTION__,
+ dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__,
pdev->bus->number, PCI_SLOT(pdev->devfn),
PCI_FUNC(pdev->devfn), pdev->irq);
get_hp_hw_control_from_firmware(pdev);
@@ -1103,7 +1103,7 @@
*/
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
+ dbg("%s: Default Logical Slot Register %d value %x\n", __func__,
hp_slot, slot_reg);
slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
@@ -1117,7 +1117,7 @@
SERR_INTR_RSVDZ_MASK);
shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
+ dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
}
return 0;