ARM: AT91: Add the ADC to the sam9g20ek board
This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9G20-EK board.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 5652dde..be0eb26 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -17,12 +17,15 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
+#include <linux/platform_data/at91_adc.h>
+
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/at91_adc.h>
#include "generic.h"
@@ -1369,6 +1372,93 @@
void __init at91_add_device_cf(struct at91_cf_data * data) {}
#endif
+/* --------------------------------------------------------------------
+ * ADCs
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_ADC,
+ .end = AT91SAM9260_BASE_ADC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_ADC,
+ .end = AT91SAM9260_ID_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_adc_device = {
+ .name = "at91_adc",
+ .id = -1,
+ .dev = {
+ .platform_data = &adc_data,
+ },
+ .resource = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+ [0] = {
+ .name = "timer-counter-0",
+ .value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
+ },
+ [1] = {
+ .name = "timer-counter-1",
+ .value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
+ },
+ [2] = {
+ .name = "timer-counter-2",
+ .value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
+ },
+ [3] = {
+ .name = "external",
+ .value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
+ .is_external = true,
+ },
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g20 = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = AT91_ADC_MR,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+ if (!data)
+ return;
+
+ if (test_bit(0, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC0, 0);
+ if (test_bit(1, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC1, 0);
+ if (test_bit(2, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC2, 0);
+ if (test_bit(3, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC3, 0);
+
+ if (data->use_external_triggers)
+ at91_set_A_periph(AT91_PIN_PA22, 0);
+
+ data->num_channels = 4;
+ data->startup_time = 10;
+ data->registers = &at91_adc_register_g20;
+ data->trigger_number = 4;
+ data->trigger_list = at91_adc_triggers;
+
+ adc_data = *data;
+ platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
/* -------------------------------------------------------------------- */
/*
* These devices are always present and don't need any board-specific