libertas: support mesh for various firmware versions
CMD_MESH_CONFIG command ID and a couple of structure members in TxPD,
RxPD have been changed in firmware version 10.x.y.z and newer.
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 8e66977..820c22d 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -160,8 +160,15 @@
p_rx_pkt = (struct rxpackethdr *) skb->data;
p_rx_pd = &p_rx_pkt->rx_pd;
- if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME))
- dev = priv->mesh_dev;
+ if (priv->mesh_dev) {
+ if (priv->mesh_fw_ver == MESH_FW_OLD) {
+ if (p_rx_pd->rx_control & RxPD_MESH_FRAME)
+ dev = priv->mesh_dev;
+ } else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+ if (p_rx_pd->u.bss.bss_num == MESH_IFACE_ID)
+ dev = priv->mesh_dev;
+ }
+ }
lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data,
min_t(unsigned int, skb->len, 100));
@@ -174,18 +181,6 @@
goto done;
}
- /*
- * Check rxpd status and update 802.3 stat,
- */
- if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
- lbs_deb_rx("rx err: frame received with bad status\n");
- lbs_pr_alert("rxpd not ok\n");
- dev->stats.rx_errors++;
- ret = 0;
- dev_kfree_skb(skb);
- goto done;
- }
-
lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
@@ -334,14 +329,6 @@
goto done;
}
- /*
- * Check rxpd status and update 802.3 stat,
- */
- if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
- //lbs_deb_rx("rx err: frame received with bad status\n");
- dev->stats.rx_errors++;
- }
-
lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
@@ -353,8 +340,6 @@
radiotap_hdr.hdr.it_pad = 0;
radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
- if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
- radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS;
radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
/* XXX must check no carryout */
radiotap_hdr.antsignal = prxpd->snr + prxpd->nf;