PM / devfreq: Add Exynos5-bus devfreq driver for Exynos5250
Exynos5-bus device devfreq driver monitors PPMU counters and
adjusts operating frequencies and voltages with OPP. ASV should
be used to provide appropriate voltages as per the speed group
of the SoC rather than using a constant 1.025V.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
[myungjoo.ham@samsung.com: minor style update]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Jonghwan Choi <jhbird.choi@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/drivers/devfreq/exynos/exynos_ppmu.h b/drivers/devfreq/exynos/exynos_ppmu.h
new file mode 100644
index 0000000..7dfb221
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos_ppmu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS PPMU header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __DEVFREQ_EXYNOS_PPMU_H
+#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
+
+#include <linux/ktime.h>
+
+/* For PPMU Control */
+#define PPMU_ENABLE BIT(0)
+#define PPMU_DISABLE 0x0
+#define PPMU_CYCLE_RESET BIT(1)
+#define PPMU_COUNTER_RESET BIT(2)
+
+#define PPMU_ENABLE_COUNT0 BIT(0)
+#define PPMU_ENABLE_COUNT1 BIT(1)
+#define PPMU_ENABLE_COUNT2 BIT(2)
+#define PPMU_ENABLE_COUNT3 BIT(3)
+#define PPMU_ENABLE_CYCLE BIT(31)
+
+#define PPMU_CNTENS 0x10
+#define PPMU_FLAG 0x50
+#define PPMU_CCNT_OVERFLOW BIT(31)
+#define PPMU_CCNT 0x100
+
+#define PPMU_PMCNT0 0x110
+#define PPMU_PMCNT_OFFSET 0x10
+#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x))
+
+#define PPMU_BEVT0SEL 0x1000
+#define PPMU_BEVTSEL_OFFSET 0x100
+#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET))
+
+/* For Event Selection */
+#define RD_DATA_COUNT 0x5
+#define WR_DATA_COUNT 0x6
+#define RDWR_DATA_COUNT 0x7
+
+enum ppmu_counter {
+ PPMU_PMNCNT0,
+ PPMU_PMCCNT1,
+ PPMU_PMNCNT2,
+ PPMU_PMNCNT3,
+ PPMU_PMNCNT_MAX,
+};
+
+struct bus_opp_table {
+ unsigned int idx;
+ unsigned long clk;
+ unsigned long volt;
+};
+
+struct exynos_ppmu {
+ void __iomem *hw_base;
+ unsigned int ccnt;
+ unsigned int event[PPMU_PMNCNT_MAX];
+ unsigned int count[PPMU_PMNCNT_MAX];
+ unsigned long long ns;
+ ktime_t reset_time;
+ bool ccnt_overflow;
+ bool count_overflow[PPMU_PMNCNT_MAX];
+};
+
+void exynos_ppmu_reset(void __iomem *ppmu_base);
+void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
+ unsigned int evt);
+void exynos_ppmu_start(void __iomem *ppmu_base);
+void exynos_ppmu_stop(void __iomem *ppmu_base);
+unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
+#endif /* __DEVFREQ_EXYNOS_PPMU_H */