i2c/tps65010: move header to <linux/i2c/...>
Move the tps65010 header file from the OMAP arch directory to the
more generic <linux/i2c/...> directory, and remove the spurious
dependency of this driver on OMAP.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/include/linux/i2c/tps65010.h b/include/linux/i2c/tps65010.h
new file mode 100644
index 0000000..7021635
--- /dev/null
+++ b/include/linux/i2c/tps65010.h
@@ -0,0 +1,156 @@
+/* linux/i2c/tps65010.h
+ *
+ * Functions to access TPS65010 power management device.
+ *
+ * Copyright (C) 2004 Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_I2C_TPS65010_H
+#define __LINUX_I2C_TPS65010_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Registers, all 8 bits
+ * ----------------------------------------------------------------------------
+ */
+
+#define TPS_CHGSTATUS 0x01
+# define TPS_CHG_USB (1 << 7)
+# define TPS_CHG_AC (1 << 6)
+# define TPS_CHG_THERM (1 << 5)
+# define TPS_CHG_TERM (1 << 4)
+# define TPS_CHG_TAPER_TMO (1 << 3)
+# define TPS_CHG_CHG_TMO (1 << 2)
+# define TPS_CHG_PRECHG_TMO (1 << 1)
+# define TPS_CHG_TEMP_ERR (1 << 0)
+#define TPS_REGSTATUS 0x02
+# define TPS_REG_ONOFF (1 << 7)
+# define TPS_REG_COVER (1 << 6)
+# define TPS_REG_UVLO (1 << 5)
+# define TPS_REG_NO_CHG (1 << 4) /* tps65013 */
+# define TPS_REG_PG_LD02 (1 << 3)
+# define TPS_REG_PG_LD01 (1 << 2)
+# define TPS_REG_PG_MAIN (1 << 1)
+# define TPS_REG_PG_CORE (1 << 0)
+#define TPS_MASK1 0x03
+#define TPS_MASK2 0x04
+#define TPS_ACKINT1 0x05
+#define TPS_ACKINT2 0x06
+#define TPS_CHGCONFIG 0x07
+# define TPS_CHARGE_POR (1 << 7) /* 65010/65012 */
+# define TPS65013_AUA (1 << 7) /* 65011/65013 */
+# define TPS_CHARGE_RESET (1 << 6)
+# define TPS_CHARGE_FAST (1 << 5)
+# define TPS_CHARGE_CURRENT (3 << 3)
+# define TPS_VBUS_500MA (1 << 2)
+# define TPS_VBUS_CHARGING (1 << 1)
+# define TPS_CHARGE_ENABLE (1 << 0)
+#define TPS_LED1_ON 0x08
+#define TPS_LED1_PER 0x09
+#define TPS_LED2_ON 0x0a
+#define TPS_LED2_PER 0x0b
+#define TPS_VDCDC1 0x0c
+# define TPS_ENABLE_LP (1 << 3)
+#define TPS_VDCDC2 0x0d
+#define TPS_VREGS1 0x0e
+# define TPS_LDO2_ENABLE (1 << 7)
+# define TPS_LDO2_OFF (1 << 6)
+# define TPS_VLDO2_3_0V (3 << 4)
+# define TPS_VLDO2_2_75V (2 << 4)
+# define TPS_VLDO2_2_5V (1 << 4)
+# define TPS_VLDO2_1_8V (0 << 4)
+# define TPS_LDO1_ENABLE (1 << 3)
+# define TPS_LDO1_OFF (1 << 2)
+# define TPS_VLDO1_3_0V (3 << 0)
+# define TPS_VLDO1_2_75V (2 << 0)
+# define TPS_VLDO1_2_5V (1 << 0)
+# define TPS_VLDO1_ADJ (0 << 0)
+#define TPS_MASK3 0x0f
+#define TPS_DEFGPIO 0x10
+
+/*
+ * ----------------------------------------------------------------------------
+ * Macros used by exported functions
+ * ----------------------------------------------------------------------------
+ */
+
+#define LED1 1
+#define LED2 2
+#define OFF 0
+#define ON 1
+#define BLINK 2
+#define GPIO1 1
+#define GPIO2 2
+#define GPIO3 3
+#define GPIO4 4
+#define LOW 0
+#define HIGH 1
+
+/*
+ * ----------------------------------------------------------------------------
+ * Exported functions
+ * ----------------------------------------------------------------------------
+ */
+
+/* Draw from VBUS:
+ * 0 mA -- DON'T DRAW (might supply power instead)
+ * 100 mA -- usb unit load (slowest charge rate)
+ * 500 mA -- usb high power (fast battery charge)
+ */
+extern int tps65010_set_vbus_draw(unsigned mA);
+
+/* tps65010_set_gpio_out_value parameter:
+ * gpio: GPIO1, GPIO2, GPIO3 or GPIO4
+ * value: LOW or HIGH
+ */
+extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value);
+
+/* tps65010_set_led parameter:
+ * led: LED1 or LED2
+ * mode: ON, OFF or BLINK
+ */
+extern int tps65010_set_led(unsigned led, unsigned mode);
+
+/* tps65010_set_vib parameter:
+ * value: ON or OFF
+ */
+extern int tps65010_set_vib(unsigned value);
+
+/* tps65010_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+extern int tps65010_set_low_pwr(unsigned mode);
+
+/* tps65010_config_vregs1 parameter:
+ * value to be written to VREGS1 register
+ * Note: The complete register is written, set all bits you need
+ */
+extern int tps65010_config_vregs1(unsigned value);
+
+/* tps65013_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+extern int tps65013_set_low_pwr(unsigned mode);
+
+#endif /* __LINUX_I2C_TPS65010_H */
+