MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 8187845..11f3ad2 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -276,7 +276,7 @@
}
static struct led_classdev db1100_mmc_led = {
- .brightness_set = db1100_mmcled_set,
+ .brightness_set = db1100_mmcled_set,
};
static int db1100_mmc1_card_readonly(void *mmc_host)
@@ -314,7 +314,7 @@
}
static struct led_classdev db1100_mmc1_led = {
- .brightness_set = db1100_mmc1led_set,
+ .brightness_set = db1100_mmc1led_set,
};
static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
@@ -357,7 +357,7 @@
}
};
-static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
+static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
static struct platform_device db1100_mmc0_dev = {
.name = "au1xxx-mmc",
@@ -482,7 +482,7 @@
.mode = 0,
.irq = AU1100_GPIO21_INT,
.platform_data = &db1100_touch_pd,
- .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */
+ .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */
},
};
@@ -572,7 +572,7 @@
irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
/* EPSON S1D13806 0x1b000000
- * SRAM 1MB/2MB 0x1a000000
+ * SRAM 1MB/2MB 0x1a000000
* DS1693 RTC 0x0c000000
*/
} else if (board == BCSR_WHOAMI_PB1100) {
@@ -586,7 +586,7 @@
irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW);
/* EPSON S1D13806 0x1b000000
- * SRAM 1MB/2MB 0x1a000000
+ * SRAM 1MB/2MB 0x1a000000
* DiskOnChip 0x0d000000
* DS1693 RTC 0x0c000000
*/
@@ -605,7 +605,7 @@
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
AU1000_PCMCIA_IO_PHYS_ADDR,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- c0, d0, /*s0*/0, 0, 0);
+ c0, d0, /*s0*/0, 0, 0);
if (twosocks) {
irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
@@ -619,7 +619,7 @@
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
- c1, d1, /*s1*/0, 0, 1);
+ c1, d1, /*s1*/0, 0, 1);
}
platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));