MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 299b7d2..a84d98b 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -90,14 +90,14 @@
whoami = bcsr_read(BCSR_WHOAMI);
printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
- " Board-ID %d Daughtercard ID %d\n", get_system_type(),
+ " Board-ID %d Daughtercard ID %d\n", get_system_type(),
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
/* SMBus/SPI on PSC0, Audio on PSC1 */
pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
- pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
+ pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
wmb();
@@ -129,7 +129,7 @@
static struct mtd_partition db1200_spiflash_parts[] = {
{
.name = "spi_flash",
- .offset = 0,
+ .offset = 0,
.size = MTDPART_SIZ_FULL,
},
};
@@ -200,12 +200,12 @@
static struct mtd_partition db1200_nand_parts[] = {
{
.name = "NAND FS 0",
- .offset = 0,
+ .offset = 0,
.size = 8 * 1024 * 1024,
},
{
.name = "NAND FS 1",
- .offset = MTDPART_OFS_APPEND,
+ .offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
},
};
@@ -395,7 +395,7 @@
}
static struct led_classdev db1200_mmc_led = {
- .brightness_set = db1200_mmcled_set,
+ .brightness_set = db1200_mmcled_set,
};
/* -- */
@@ -463,7 +463,7 @@
}
static struct led_classdev pb1200_mmc1_led = {
- .brightness_set = pb1200_mmc1led_set,
+ .brightness_set = pb1200_mmc1led_set,
};
static void pb1200_mmc1_set_power(void *mmc_host, int state)
@@ -526,7 +526,7 @@
}
};
-static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
+static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
static struct platform_device db1200_mmc0_dev = {
.name = "au1xxx-mmc",
@@ -601,7 +601,7 @@
static struct au1200fb_platdata db1200fb_pd = {
.panel_index = db1200fb_panel_index,
.panel_init = db1200fb_panel_init,
- .panel_shutdown = db1200fb_panel_shutdown,
+ .panel_shutdown = db1200fb_panel_shutdown,
};
static struct resource au1200_lcd_res[] = {
@@ -772,11 +772,11 @@
}
db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
- db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff;
+ db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff;
db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
- db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+ db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
- db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff;
+ db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff;
return 0;
}
@@ -797,7 +797,7 @@
irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
- /* insert/eject pairs: one of both is always screaming. To avoid
+ /* insert/eject pairs: one of both is always screaming. To avoid
* issues they must not be automatically enabled when initially
* requested.
*/
@@ -813,7 +813,7 @@
spi_register_board_info(db1200_spi_devs,
ARRAY_SIZE(db1200_i2c_devs));
- /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI)
+ /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI)
* S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
* or S12 on the PB1200.
*/