MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h
index 8bb37bb..2cefc3c 100644
--- a/arch/mips/include/asm/jazzdma.h
+++ b/arch/mips/include/asm/jazzdma.h
@@ -10,7 +10,7 @@
extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
extern int vdma_free(unsigned long laddr);
extern int vdma_remap(unsigned long laddr, unsigned long paddr,
- unsigned long size);
+ unsigned long size);
extern unsigned long vdma_phys2log(unsigned long paddr);
extern unsigned long vdma_log2phys(unsigned long laddr);
extern void vdma_stats(void); /* for debugging only */
@@ -35,14 +35,14 @@
* Macros to get page no. and offset of a given address
* Note that VDMA_PAGE() works for physical addresses only
*/
-#define VDMA_PAGE(a) ((unsigned int)(a) >> 12)
-#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1))
+#define VDMA_PAGE(a) ((unsigned int)(a) >> 12)
+#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1))
/*
* error code returned by vdma_alloc()
* (See also arch/mips/kernel/jazzdma.c)
*/
-#define VDMA_ERROR 0xffffffff
+#define VDMA_ERROR 0xffffffff
/*
* VDMA pagetable entry description
@@ -59,37 +59,37 @@
*/
#define JAZZ_R4030_CHNL_MODE 0xE0000100 /* 8 DMA Channel Mode Registers, */
/* 0xE0000100,120,140... */
-#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */
+#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */
/* 0xE0000108,128,148... */
-#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */
+#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */
/* 0xE0000110,130,150... */
#define JAZZ_R4030_CHNL_ADDR 0xE0000118 /* 8 DMA Channel Address Regs, */
/* 0xE0000118,138,158... */
/* channel enable register bits */
-#define R4030_CHNL_ENABLE (1<<0)
-#define R4030_CHNL_WRITE (1<<1)
-#define R4030_TC_INTR (1<<8)
-#define R4030_MEM_INTR (1<<9)
-#define R4030_ADDR_INTR (1<<10)
+#define R4030_CHNL_ENABLE (1<<0)
+#define R4030_CHNL_WRITE (1<<1)
+#define R4030_TC_INTR (1<<8)
+#define R4030_MEM_INTR (1<<9)
+#define R4030_ADDR_INTR (1<<10)
/*
* Channel mode register bits
*/
-#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */
-#define R4030_MODE_ATIME_80 (1)
-#define R4030_MODE_ATIME_120 (2)
-#define R4030_MODE_ATIME_160 (3)
-#define R4030_MODE_ATIME_200 (4)
-#define R4030_MODE_ATIME_240 (5)
-#define R4030_MODE_ATIME_280 (6)
-#define R4030_MODE_ATIME_320 (7)
-#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */
-#define R4030_MODE_WIDTH_16 (2<<3)
-#define R4030_MODE_WIDTH_32 (3<<3)
-#define R4030_MODE_INTR_EN (1<<5)
-#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */
-#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */
+#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */
+#define R4030_MODE_ATIME_80 (1)
+#define R4030_MODE_ATIME_120 (2)
+#define R4030_MODE_ATIME_160 (3)
+#define R4030_MODE_ATIME_200 (4)
+#define R4030_MODE_ATIME_240 (5)
+#define R4030_MODE_ATIME_280 (6)
+#define R4030_MODE_ATIME_320 (7)
+#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */
+#define R4030_MODE_WIDTH_16 (2<<3)
+#define R4030_MODE_WIDTH_32 (3<<3)
+#define R4030_MODE_INTR_EN (1<<5)
+#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */
+#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */
#endif /* _ASM_JAZZDMA_H */