UAPI: (Scripted) Disintegrate arch/parisc/include/asm
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h
index 7f0f2d2..7eb616e 100644
--- a/arch/parisc/include/asm/pdc.h
+++ b/arch/parisc/include/asm/pdc.h
@@ -1,348 +1,10 @@
#ifndef _PARISC_PDC_H
#define _PARISC_PDC_H
-/*
- * PDC return values ...
- * All PDC calls return a subset of these errors.
- */
-
-#define PDC_WARN 3 /* Call completed with a warning */
-#define PDC_REQ_ERR_1 2 /* See above */
-#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */
-#define PDC_OK 0 /* Call completed successfully */
-#define PDC_BAD_PROC -1 /* Called non-existent procedure*/
-#define PDC_BAD_OPTION -2 /* Called with non-existent option */
-#define PDC_ERROR -3 /* Call could not complete without an error */
-#define PDC_NE_MOD -5 /* Module not found */
-#define PDC_NE_CELL_MOD -7 /* Cell module not found */
-#define PDC_INVALID_ARG -10 /* Called with an invalid argument */
-#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
-#define PDC_NOT_NARROW -17 /* Narrow mode not supported */
-
-/*
- * PDC entry points...
- */
-
-#define PDC_POW_FAIL 1 /* perform a power-fail */
-#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */
-
-#define PDC_CHASSIS 2 /* PDC-chassis functions */
-#define PDC_CHASSIS_DISP 0 /* update chassis display */
-#define PDC_CHASSIS_WARN 1 /* return chassis warnings */
-#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */
-#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */
-
-#define PDC_PIM 3 /* Get PIM data */
-#define PDC_PIM_HPMC 0 /* Transfer HPMC data */
-#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/
-#define PDC_PIM_LPMC 2 /* Transfer HPMC data */
-#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */
-#define PDC_PIM_TOC 4 /* Transfer TOC data */
-
-#define PDC_MODEL 4 /* PDC model information call */
-#define PDC_MODEL_INFO 0 /* returns information */
-#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */
-#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/
-#define PDC_MODEL_SYSMODEL 3 /* return system model info */
-#define PDC_MODEL_ENSPEC 4 /* enable specific option */
-#define PDC_MODEL_DISPEC 5 /* disable specific option */
-#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
-#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
-/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
-#define PDC_MODEL_OS64 (1 << 0)
-#define PDC_MODEL_OS32 (1 << 1)
-#define PDC_MODEL_IOPDIR_FDC (1 << 2)
-#define PDC_MODEL_NVA_MASK (3 << 4)
-#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
-#define PDC_MODEL_NVA_SLOW (1 << 4)
-#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
-#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
-#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
-
-#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */
-#define PA90_INSTRUCTION_SET 0x8
-
-#define PDC_CACHE 5 /* return/set cache (& TLB) info*/
-#define PDC_CACHE_INFO 0 /* returns information */
-#define PDC_CACHE_SET_COH 1 /* set coherence state */
-#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */
-
-#define PDC_HPA 6 /* return HPA of processor */
-#define PDC_HPA_PROCESSOR 0
-#define PDC_HPA_MODULES 1
-
-#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */
-#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */
-
-#define PDC_IODC 8 /* talk to IODC */
-#define PDC_IODC_READ 0 /* read IODC entry point */
-/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
-#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */
-/* 1, 2 obsolete - HVERSION dependent*/
-#define PDC_IODC_RI_INIT 3 /* Initialize module */
-#define PDC_IODC_RI_IO 4 /* Module input/output */
-#define PDC_IODC_RI_SPA 5 /* Module input/output */
-#define PDC_IODC_RI_CONFIG 6 /* Module input/output */
-/* 7 obsolete - HVERSION dependent */
-#define PDC_IODC_RI_TEST 8 /* Module input/output */
-#define PDC_IODC_RI_TLB 9 /* Module input/output */
-#define PDC_IODC_NINIT 2 /* non-destructive init */
-#define PDC_IODC_DINIT 3 /* destructive init */
-#define PDC_IODC_MEMERR 4 /* check for memory errors */
-#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */
-#define PDC_IODC_BUS_ERROR -4 /* bus error return value */
-#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */
-#define PDC_IODC_COUNT -6 /* count is too small */
-
-#define PDC_TOD 9 /* time-of-day clock (TOD) */
-#define PDC_TOD_READ 0 /* read TOD */
-#define PDC_TOD_WRITE 1 /* write TOD */
-
-
-#define PDC_STABLE 10 /* stable storage (sprockets) */
-#define PDC_STABLE_READ 0
-#define PDC_STABLE_WRITE 1
-#define PDC_STABLE_RETURN_SIZE 2
-#define PDC_STABLE_VERIFY_CONTENTS 3
-#define PDC_STABLE_INITIALIZE 4
-
-#define PDC_NVOLATILE 11 /* often not implemented */
-
-#define PDC_ADD_VALID 12 /* Memory validation PDC call */
-#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */
-
-#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */
-
-#define PDC_PROC 16 /* (sprockets) */
-
-#define PDC_CONFIG 16 /* (sprockets) */
-#define PDC_CONFIG_DECONFIG 0
-#define PDC_CONFIG_DRECONFIG 1
-#define PDC_CONFIG_DRETURN_CONFIG 2
-
-#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */
-#define PDC_BTLB_INFO 0 /* returns parameter */
-#define PDC_BTLB_INSERT 1 /* insert BTLB entry */
-#define PDC_BTLB_PURGE 2 /* purge BTLB entries */
-#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */
-
-#define PDC_TLB 19 /* manage hardware TLB miss handling */
-#define PDC_TLB_INFO 0 /* returns parameter */
-#define PDC_TLB_SETUP 1 /* set up miss handling */
-
-#define PDC_MEM 20 /* Manage memory */
-#define PDC_MEM_MEMINFO 0
-#define PDC_MEM_ADD_PAGE 1
-#define PDC_MEM_CLEAR_PDT 2
-#define PDC_MEM_READ_PDT 3
-#define PDC_MEM_RESET_CLEAR 4
-#define PDC_MEM_GOODMEM 5
-#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */
-#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
-#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
-#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
-#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
-
-#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */
-#define PDC_MEM_RET_DUPLICATE_ENTRY 4
-#define PDC_MEM_RET_BUF_SIZE_SMALL 1
-#define PDC_MEM_RET_PDT_FULL -11
-#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
-
-#define PDC_PSW 21 /* Get/Set default System Mask */
-#define PDC_PSW_MASK 0 /* Return mask */
-#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
-#define PDC_PSW_SET_DEFAULTS 2 /* Set default */
-#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */
-#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */
-
-#define PDC_SYSTEM_MAP 22 /* find system modules */
-#define PDC_FIND_MODULE 0
-#define PDC_FIND_ADDRESS 1
-#define PDC_TRANSLATE_PATH 2
-
-#define PDC_SOFT_POWER 23 /* soft power switch */
-#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */
-#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */
-
-
-/* HVERSION dependent */
-
-/* The PDC_MEM_MAP calls */
-#define PDC_MEM_MAP 128 /* on s700: return page info */
-#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */
-
-#define PDC_EEPROM 129 /* EEPROM access */
-#define PDC_EEPROM_READ_WORD 0
-#define PDC_EEPROM_WRITE_WORD 1
-#define PDC_EEPROM_READ_BYTE 2
-#define PDC_EEPROM_WRITE_BYTE 3
-#define PDC_EEPROM_EEPROM_PASSWORD -1000
-
-#define PDC_NVM 130 /* NVM (non-volatile memory) access */
-#define PDC_NVM_READ_WORD 0
-#define PDC_NVM_WRITE_WORD 1
-#define PDC_NVM_READ_BYTE 2
-#define PDC_NVM_WRITE_BYTE 3
-
-#define PDC_SEED_ERROR 132 /* (sprockets) */
-
-#define PDC_IO 135 /* log error info, reset IO system */
-#define PDC_IO_READ_AND_CLEAR_ERRORS 0
-#define PDC_IO_RESET 1
-#define PDC_IO_RESET_DEVICES 2
-/* sets bits 6&7 (little endian) of the HcControl Register */
-#define PDC_IO_USB_SUSPEND 0xC000000000000000
-#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */
-#define PDC_IO_NO_SUSPEND -6 /* return value */
-
-#define PDC_BROADCAST_RESET 136 /* reset all processors */
-#define PDC_DO_RESET 0 /* option: perform a broadcast reset */
-#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */
-#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */
-#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */
-
-#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */
-#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */
-
-#define PDC_LAN_STATION_ID_SIZE 6
-
-#define PDC_CHECK_RANGES 139 /* (sprockets) */
-
-#define PDC_NV_SECTIONS 141 /* (sprockets) */
-
-#define PDC_PERFORMANCE 142 /* performance monitoring */
-
-#define PDC_SYSTEM_INFO 143 /* system information */
-#define PDC_SYSINFO_RETURN_INFO_SIZE 0
-#define PDC_SYSINFO_RRETURN_SYS_INFO 1
-#define PDC_SYSINFO_RRETURN_ERRORS 2
-#define PDC_SYSINFO_RRETURN_WARNINGS 3
-#define PDC_SYSINFO_RETURN_REVISIONS 4
-#define PDC_SYSINFO_RRETURN_DIAGNOSE 5
-#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
-
-#define PDC_RDR 144 /* (sprockets) */
-#define PDC_RDR_READ_BUFFER 0
-#define PDC_RDR_READ_SINGLE 1
-#define PDC_RDR_WRITE_SINGLE 2
-
-#define PDC_INTRIGUE 145 /* (sprockets) */
-#define PDC_INTRIGUE_WRITE_BUFFER 0
-#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
-#define PDC_INTRIGUE_START_CPU_COUNTERS 2
-#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3
-
-#define PDC_STI 146 /* STI access */
-/* same as PDC_PCI_XXX values (see below) */
-
-/* Legacy PDC definitions for same stuff */
-#define PDC_PCI_INDEX 147
-#define PDC_PCI_INTERFACE_INFO 0
-#define PDC_PCI_SLOT_INFO 1
-#define PDC_PCI_INFLIGHT_BYTES 2
-#define PDC_PCI_READ_CONFIG 3
-#define PDC_PCI_WRITE_CONFIG 4
-#define PDC_PCI_READ_PCI_IO 5
-#define PDC_PCI_WRITE_PCI_IO 6
-#define PDC_PCI_READ_CONFIG_DELAY 7
-#define PDC_PCI_UPDATE_CONFIG_DELAY 8
-#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
-#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
-#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
-#define PDC_PCI_PCI_RESERVED 12
-#define PDC_PCI_PCI_INT_ROUTE_SIZE 13
-#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
-#define PDC_PCI_PCI_INT_ROUTE 14
-#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
-#define PDC_PCI_READ_MON_TYPE 15
-#define PDC_PCI_WRITE_MON_TYPE 16
-
-
-/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
-#define PDC_INITIATOR 163
-#define PDC_GET_INITIATOR 0
-#define PDC_SET_INITIATOR 1
-#define PDC_DELETE_INITIATOR 2
-#define PDC_RETURN_TABLE_SIZE 3
-#define PDC_RETURN_TABLE 4
-
-#define PDC_LINK 165 /* (sprockets) */
-#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
-#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
-
-/* cl_class
- * page 3-33 of IO-Firmware ARS
- * IODC ENTRY_INIT(Search first) RET[1]
- */
-#define CL_NULL 0 /* invalid */
-#define CL_RANDOM 1 /* random access (as disk) */
-#define CL_SEQU 2 /* sequential access (as tape) */
-#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
-#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
-#define CL_DISPL 9 /* half-duplex console (display) */
-#define CL_FC 10 /* FiberChannel access media */
-
-/* IODC ENTRY_INIT() */
-#define ENTRY_INIT_SRCH_FRST 2
-#define ENTRY_INIT_SRCH_NEXT 3
-#define ENTRY_INIT_MOD_DEV 4
-#define ENTRY_INIT_DEV 5
-#define ENTRY_INIT_MOD 6
-#define ENTRY_INIT_MSG 9
-
-/* IODC ENTRY_IO() */
-#define ENTRY_IO_BOOTIN 0
-#define ENTRY_IO_BOOTOUT 1
-#define ENTRY_IO_CIN 2
-#define ENTRY_IO_COUT 3
-#define ENTRY_IO_CLOSE 4
-#define ENTRY_IO_GETMSG 9
-#define ENTRY_IO_BBLOCK_IN 16
-#define ENTRY_IO_BBLOCK_OUT 17
-
-/* IODC ENTRY_SPA() */
-
-/* IODC ENTRY_CONFIG() */
-
-/* IODC ENTRY_TEST() */
-
-/* IODC ENTRY_TLB() */
-
-/* constants for OS (NVM...) */
-#define OS_ID_NONE 0 /* Undefined OS ID */
-#define OS_ID_HPUX 1 /* HP-UX OS */
-#define OS_ID_MPEXL 2 /* MPE XL OS */
-#define OS_ID_OSF 3 /* OSF OS */
-#define OS_ID_HPRT 4 /* HP-RT OS */
-#define OS_ID_NOVEL 5 /* NOVELL OS */
-#define OS_ID_LINUX 6 /* Linux */
-
-
-/* constants for PDC_CHASSIS */
-#define OSTAT_OFF 0
-#define OSTAT_FLT 1
-#define OSTAT_TEST 2
-#define OSTAT_INIT 3
-#define OSTAT_SHUT 4
-#define OSTAT_WARN 5
-#define OSTAT_RUN 6
-#define OSTAT_ON 7
-
-/* Page Zero constant offsets used by the HPMC handler */
-#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
-#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
-#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
-
-/* size of the pdc_result buffer for firmware.c */
-#define NUM_PDC_RESULT 32
+#include <uapi/asm/pdc.h>
#if !defined(__ASSEMBLY__)
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-
extern int pdc_type;
/* Values for pdc_type */
@@ -673,88 +335,5 @@
}
}
-#endif /* __KERNEL__ */
-
-/* flags of the device_path */
-#define PF_AUTOBOOT 0x80
-#define PF_AUTOSEARCH 0x40
-#define PF_TIMER 0x0F
-
-struct device_path { /* page 1-69 */
- unsigned char flags; /* flags see above! */
- unsigned char bc[6]; /* bus converter routing info */
- unsigned char mod;
- unsigned int layers[6];/* device-specific layer-info */
-} __attribute__((aligned(8))) ;
-
-struct pz_device {
- struct device_path dp; /* see above */
- /* struct iomod *hpa; */
- unsigned int hpa; /* HPA base address */
- /* char *spa; */
- unsigned int spa; /* SPA base address */
- /* int (*iodc_io)(struct iomod*, ...); */
- unsigned int iodc_io; /* device entry point */
- short pad; /* reserved */
- unsigned short cl_class;/* see below */
-} __attribute__((aligned(8))) ;
-
-struct zeropage {
- /* [0x000] initialize vectors (VEC) */
- unsigned int vec_special; /* must be zero */
- /* int (*vec_pow_fail)(void);*/
- unsigned int vec_pow_fail; /* power failure handler */
- /* int (*vec_toc)(void); */
- unsigned int vec_toc;
- unsigned int vec_toclen;
- /* int (*vec_rendz)(void); */
- unsigned int vec_rendz;
- int vec_pow_fail_flen;
- int vec_pad[10];
-
- /* [0x040] reserved processor dependent */
- int pad0[112];
-
- /* [0x200] reserved */
- int pad1[84];
-
- /* [0x350] memory configuration (MC) */
- int memc_cont; /* contiguous mem size (bytes) */
- int memc_phsize; /* physical memory size */
- int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
- unsigned int mem_pdc_hi; /* used for 64-bit */
-
- /* [0x360] various parameters for the boot-CPU */
- /* unsigned int *mem_booterr[8]; */
- unsigned int mem_booterr[8]; /* ptr to boot errors */
- unsigned int mem_free; /* first location, where OS can be loaded */
- /* struct iomod *mem_hpa; */
- unsigned int mem_hpa; /* HPA of the boot-CPU */
- /* int (*mem_pdc)(int, ...); */
- unsigned int mem_pdc; /* PDC entry point */
- unsigned int mem_10msec; /* number of clock ticks in 10msec */
-
- /* [0x390] initial memory module (IMM) */
- /* struct iomod *imm_hpa; */
- unsigned int imm_hpa; /* HPA of the IMM */
- int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
- unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
- unsigned int imm_max_mem; /* bytes of mem in IMM */
-
- /* [0x3A0] boot console, display device and keyboard */
- struct pz_device mem_cons; /* description of console device */
- struct pz_device mem_boot; /* description of boot device */
- struct pz_device mem_kbd; /* description of keyboard device */
-
- /* [0x430] reserved */
- int pad430[116];
-
- /* [0x600] processor dependent */
- __u32 pad600[1];
- __u32 proc_sti; /* pointer to STI ROM */
- __u32 pad608[126];
-};
-
#endif /* !defined(__ASSEMBLY__) */
-
#endif /* _PARISC_PDC_H */