| /* | 
 |  * Emma Mobile Timer Support - STI | 
 |  * | 
 |  *  Copyright (C) 2012 Magnus Damm | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/io.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/err.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/clocksource.h> | 
 | #include <linux/clockchips.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 |  | 
 | enum { USER_CLOCKSOURCE, USER_CLOCKEVENT, USER_NR }; | 
 |  | 
 | struct em_sti_priv { | 
 | 	void __iomem *base; | 
 | 	struct clk *clk; | 
 | 	struct platform_device *pdev; | 
 | 	unsigned int active[USER_NR]; | 
 | 	unsigned long rate; | 
 | 	raw_spinlock_t lock; | 
 | 	struct clock_event_device ced; | 
 | 	struct clocksource cs; | 
 | }; | 
 |  | 
 | #define STI_CONTROL 0x00 | 
 | #define STI_COMPA_H 0x10 | 
 | #define STI_COMPA_L 0x14 | 
 | #define STI_COMPB_H 0x18 | 
 | #define STI_COMPB_L 0x1c | 
 | #define STI_COUNT_H 0x20 | 
 | #define STI_COUNT_L 0x24 | 
 | #define STI_COUNT_RAW_H 0x28 | 
 | #define STI_COUNT_RAW_L 0x2c | 
 | #define STI_SET_H 0x30 | 
 | #define STI_SET_L 0x34 | 
 | #define STI_INTSTATUS 0x40 | 
 | #define STI_INTRAWSTATUS 0x44 | 
 | #define STI_INTENSET 0x48 | 
 | #define STI_INTENCLR 0x4c | 
 | #define STI_INTFFCLR 0x50 | 
 |  | 
 | static inline unsigned long em_sti_read(struct em_sti_priv *p, int offs) | 
 | { | 
 | 	return ioread32(p->base + offs); | 
 | } | 
 |  | 
 | static inline void em_sti_write(struct em_sti_priv *p, int offs, | 
 | 				unsigned long value) | 
 | { | 
 | 	iowrite32(value, p->base + offs); | 
 | } | 
 |  | 
 | static int em_sti_enable(struct em_sti_priv *p) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	/* enable clock */ | 
 | 	ret = clk_enable(p->clk); | 
 | 	if (ret) { | 
 | 		dev_err(&p->pdev->dev, "cannot enable clock\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* configure channel, periodic mode and maximum timeout */ | 
 | 	p->rate = clk_get_rate(p->clk); | 
 |  | 
 | 	/* reset the counter */ | 
 | 	em_sti_write(p, STI_SET_H, 0x40000000); | 
 | 	em_sti_write(p, STI_SET_L, 0x00000000); | 
 |  | 
 | 	/* mask and clear pending interrupts */ | 
 | 	em_sti_write(p, STI_INTENCLR, 3); | 
 | 	em_sti_write(p, STI_INTFFCLR, 3); | 
 |  | 
 | 	/* enable updates of counter registers */ | 
 | 	em_sti_write(p, STI_CONTROL, 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void em_sti_disable(struct em_sti_priv *p) | 
 | { | 
 | 	/* mask interrupts */ | 
 | 	em_sti_write(p, STI_INTENCLR, 3); | 
 |  | 
 | 	/* stop clock */ | 
 | 	clk_disable(p->clk); | 
 | } | 
 |  | 
 | static cycle_t em_sti_count(struct em_sti_priv *p) | 
 | { | 
 | 	cycle_t ticks; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* the STI hardware buffers the 48-bit count, but to | 
 | 	 * break it out into two 32-bit access the registers | 
 | 	 * must be accessed in a certain order. | 
 | 	 * Always read STI_COUNT_H before STI_COUNT_L. | 
 | 	 */ | 
 | 	raw_spin_lock_irqsave(&p->lock, flags); | 
 | 	ticks = (cycle_t)(em_sti_read(p, STI_COUNT_H) & 0xffff) << 32; | 
 | 	ticks |= em_sti_read(p, STI_COUNT_L); | 
 | 	raw_spin_unlock_irqrestore(&p->lock, flags); | 
 |  | 
 | 	return ticks; | 
 | } | 
 |  | 
 | static cycle_t em_sti_set_next(struct em_sti_priv *p, cycle_t next) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw_spin_lock_irqsave(&p->lock, flags); | 
 |  | 
 | 	/* mask compare A interrupt */ | 
 | 	em_sti_write(p, STI_INTENCLR, 1); | 
 |  | 
 | 	/* update compare A value */ | 
 | 	em_sti_write(p, STI_COMPA_H, next >> 32); | 
 | 	em_sti_write(p, STI_COMPA_L, next & 0xffffffff); | 
 |  | 
 | 	/* clear compare A interrupt source */ | 
 | 	em_sti_write(p, STI_INTFFCLR, 1); | 
 |  | 
 | 	/* unmask compare A interrupt */ | 
 | 	em_sti_write(p, STI_INTENSET, 1); | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&p->lock, flags); | 
 |  | 
 | 	return next; | 
 | } | 
 |  | 
 | static irqreturn_t em_sti_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	struct em_sti_priv *p = dev_id; | 
 |  | 
 | 	p->ced.event_handler(&p->ced); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int em_sti_start(struct em_sti_priv *p, unsigned int user) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int used_before; | 
 | 	int ret = 0; | 
 |  | 
 | 	raw_spin_lock_irqsave(&p->lock, flags); | 
 | 	used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT]; | 
 | 	if (!used_before) | 
 | 		ret = em_sti_enable(p); | 
 |  | 
 | 	if (!ret) | 
 | 		p->active[user] = 1; | 
 | 	raw_spin_unlock_irqrestore(&p->lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void em_sti_stop(struct em_sti_priv *p, unsigned int user) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int used_before, used_after; | 
 |  | 
 | 	raw_spin_lock_irqsave(&p->lock, flags); | 
 | 	used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT]; | 
 | 	p->active[user] = 0; | 
 | 	used_after = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT]; | 
 |  | 
 | 	if (used_before && !used_after) | 
 | 		em_sti_disable(p); | 
 | 	raw_spin_unlock_irqrestore(&p->lock, flags); | 
 | } | 
 |  | 
 | static struct em_sti_priv *cs_to_em_sti(struct clocksource *cs) | 
 | { | 
 | 	return container_of(cs, struct em_sti_priv, cs); | 
 | } | 
 |  | 
 | static cycle_t em_sti_clocksource_read(struct clocksource *cs) | 
 | { | 
 | 	return em_sti_count(cs_to_em_sti(cs)); | 
 | } | 
 |  | 
 | static int em_sti_clocksource_enable(struct clocksource *cs) | 
 | { | 
 | 	int ret; | 
 | 	struct em_sti_priv *p = cs_to_em_sti(cs); | 
 |  | 
 | 	ret = em_sti_start(p, USER_CLOCKSOURCE); | 
 | 	if (!ret) | 
 | 		__clocksource_updatefreq_hz(cs, p->rate); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void em_sti_clocksource_disable(struct clocksource *cs) | 
 | { | 
 | 	em_sti_stop(cs_to_em_sti(cs), USER_CLOCKSOURCE); | 
 | } | 
 |  | 
 | static void em_sti_clocksource_resume(struct clocksource *cs) | 
 | { | 
 | 	em_sti_clocksource_enable(cs); | 
 | } | 
 |  | 
 | static int em_sti_register_clocksource(struct em_sti_priv *p) | 
 | { | 
 | 	struct clocksource *cs = &p->cs; | 
 |  | 
 | 	memset(cs, 0, sizeof(*cs)); | 
 | 	cs->name = dev_name(&p->pdev->dev); | 
 | 	cs->rating = 200; | 
 | 	cs->read = em_sti_clocksource_read; | 
 | 	cs->enable = em_sti_clocksource_enable; | 
 | 	cs->disable = em_sti_clocksource_disable; | 
 | 	cs->suspend = em_sti_clocksource_disable; | 
 | 	cs->resume = em_sti_clocksource_resume; | 
 | 	cs->mask = CLOCKSOURCE_MASK(48); | 
 | 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; | 
 |  | 
 | 	dev_info(&p->pdev->dev, "used as clock source\n"); | 
 |  | 
 | 	/* Register with dummy 1 Hz value, gets updated in ->enable() */ | 
 | 	clocksource_register_hz(cs, 1); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct em_sti_priv *ced_to_em_sti(struct clock_event_device *ced) | 
 | { | 
 | 	return container_of(ced, struct em_sti_priv, ced); | 
 | } | 
 |  | 
 | static void em_sti_clock_event_mode(enum clock_event_mode mode, | 
 | 				    struct clock_event_device *ced) | 
 | { | 
 | 	struct em_sti_priv *p = ced_to_em_sti(ced); | 
 |  | 
 | 	/* deal with old setting first */ | 
 | 	switch (ced->mode) { | 
 | 	case CLOCK_EVT_MODE_ONESHOT: | 
 | 		em_sti_stop(p, USER_CLOCKEVENT); | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	switch (mode) { | 
 | 	case CLOCK_EVT_MODE_ONESHOT: | 
 | 		dev_info(&p->pdev->dev, "used for oneshot clock events\n"); | 
 | 		em_sti_start(p, USER_CLOCKEVENT); | 
 | 		clockevents_config(&p->ced, p->rate); | 
 | 		break; | 
 | 	case CLOCK_EVT_MODE_SHUTDOWN: | 
 | 	case CLOCK_EVT_MODE_UNUSED: | 
 | 		em_sti_stop(p, USER_CLOCKEVENT); | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static int em_sti_clock_event_next(unsigned long delta, | 
 | 				   struct clock_event_device *ced) | 
 | { | 
 | 	struct em_sti_priv *p = ced_to_em_sti(ced); | 
 | 	cycle_t next; | 
 | 	int safe; | 
 |  | 
 | 	next = em_sti_set_next(p, em_sti_count(p) + delta); | 
 | 	safe = em_sti_count(p) < (next - 1); | 
 |  | 
 | 	return !safe; | 
 | } | 
 |  | 
 | static void em_sti_register_clockevent(struct em_sti_priv *p) | 
 | { | 
 | 	struct clock_event_device *ced = &p->ced; | 
 |  | 
 | 	memset(ced, 0, sizeof(*ced)); | 
 | 	ced->name = dev_name(&p->pdev->dev); | 
 | 	ced->features = CLOCK_EVT_FEAT_ONESHOT; | 
 | 	ced->rating = 200; | 
 | 	ced->cpumask = cpumask_of(0); | 
 | 	ced->set_next_event = em_sti_clock_event_next; | 
 | 	ced->set_mode = em_sti_clock_event_mode; | 
 |  | 
 | 	dev_info(&p->pdev->dev, "used for clock events\n"); | 
 |  | 
 | 	/* Register with dummy 1 Hz value, gets updated in ->set_mode() */ | 
 | 	clockevents_config_and_register(ced, 1, 2, 0xffffffff); | 
 | } | 
 |  | 
 | static int __devinit em_sti_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct em_sti_priv *p; | 
 | 	struct resource *res; | 
 | 	int irq, ret; | 
 |  | 
 | 	p = kzalloc(sizeof(*p), GFP_KERNEL); | 
 | 	if (p == NULL) { | 
 | 		dev_err(&pdev->dev, "failed to allocate driver data\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err0; | 
 | 	} | 
 |  | 
 | 	p->pdev = pdev; | 
 | 	platform_set_drvdata(pdev, p); | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) { | 
 | 		dev_err(&pdev->dev, "failed to get I/O memory\n"); | 
 | 		ret = -EINVAL; | 
 | 		goto err0; | 
 | 	} | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (irq < 0) { | 
 | 		dev_err(&pdev->dev, "failed to get irq\n"); | 
 | 		ret = -EINVAL; | 
 | 		goto err0; | 
 | 	} | 
 |  | 
 | 	/* map memory, let base point to the STI instance */ | 
 | 	p->base = ioremap_nocache(res->start, resource_size(res)); | 
 | 	if (p->base == NULL) { | 
 | 		dev_err(&pdev->dev, "failed to remap I/O memory\n"); | 
 | 		ret = -ENXIO; | 
 | 		goto err0; | 
 | 	} | 
 |  | 
 | 	/* get hold of clock */ | 
 | 	p->clk = clk_get(&pdev->dev, "sclk"); | 
 | 	if (IS_ERR(p->clk)) { | 
 | 		dev_err(&pdev->dev, "cannot get clock\n"); | 
 | 		ret = PTR_ERR(p->clk); | 
 | 		goto err1; | 
 | 	} | 
 |  | 
 | 	if (request_irq(irq, em_sti_interrupt, | 
 | 			IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING, | 
 | 			dev_name(&pdev->dev), p)) { | 
 | 		dev_err(&pdev->dev, "failed to request low IRQ\n"); | 
 | 		ret = -ENOENT; | 
 | 		goto err2; | 
 | 	} | 
 |  | 
 | 	raw_spin_lock_init(&p->lock); | 
 | 	em_sti_register_clockevent(p); | 
 | 	em_sti_register_clocksource(p); | 
 | 	return 0; | 
 |  | 
 | err2: | 
 | 	clk_put(p->clk); | 
 | err1: | 
 | 	iounmap(p->base); | 
 | err0: | 
 | 	kfree(p); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit em_sti_remove(struct platform_device *pdev) | 
 | { | 
 | 	return -EBUSY; /* cannot unregister clockevent and clocksource */ | 
 | } | 
 |  | 
 | static const struct of_device_id em_sti_dt_ids[] __devinitconst = { | 
 | 	{ .compatible = "renesas,em-sti", }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, em_sti_dt_ids); | 
 |  | 
 | static struct platform_driver em_sti_device_driver = { | 
 | 	.probe		= em_sti_probe, | 
 | 	.remove		= __devexit_p(em_sti_remove), | 
 | 	.driver		= { | 
 | 		.name	= "em_sti", | 
 | 		.of_match_table = em_sti_dt_ids, | 
 | 	} | 
 | }; | 
 |  | 
 | module_platform_driver(em_sti_device_driver); | 
 |  | 
 | MODULE_AUTHOR("Magnus Damm"); | 
 | MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver"); | 
 | MODULE_LICENSE("GPL v2"); |