regulator: TPS65910: Move regulator defs to header
Move the regulator defintions to the header so that platform board file
can use them to configure specific regulators.
Signed-off-by: Kyle Manna <kyle.manna@fuel7.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 66d2d60..44b4f22 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -25,30 +25,6 @@
#include <linux/gpio.h>
#include <linux/mfd/tps65910.h>
-#define TPS65910_REG_VRTC 0
-#define TPS65910_REG_VIO 1
-#define TPS65910_REG_VDD1 2
-#define TPS65910_REG_VDD2 3
-#define TPS65910_REG_VDD3 4
-#define TPS65910_REG_VDIG1 5
-#define TPS65910_REG_VDIG2 6
-#define TPS65910_REG_VPLL 7
-#define TPS65910_REG_VDAC 8
-#define TPS65910_REG_VAUX1 9
-#define TPS65910_REG_VAUX2 10
-#define TPS65910_REG_VAUX33 11
-#define TPS65910_REG_VMMC 12
-
-#define TPS65911_REG_VDDCTRL 4
-#define TPS65911_REG_LDO1 5
-#define TPS65911_REG_LDO2 6
-#define TPS65911_REG_LDO3 7
-#define TPS65911_REG_LDO4 8
-#define TPS65911_REG_LDO5 9
-#define TPS65911_REG_LDO6 10
-#define TPS65911_REG_LDO7 11
-#define TPS65911_REG_LDO8 12
-
#define TPS65910_SUPPLY_STATE_ENABLED 0x1
/* supported VIO voltages in milivolts */
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 82b4c88..fc5205d 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -739,6 +739,31 @@
#define TPS65910_GPIO_STS BIT(1)
#define TPS65910_GPIO_SET BIT(0)
+/* Regulator Index Definitions */
+#define TPS65910_REG_VRTC 0
+#define TPS65910_REG_VIO 1
+#define TPS65910_REG_VDD1 2
+#define TPS65910_REG_VDD2 3
+#define TPS65910_REG_VDD3 4
+#define TPS65910_REG_VDIG1 5
+#define TPS65910_REG_VDIG2 6
+#define TPS65910_REG_VPLL 7
+#define TPS65910_REG_VDAC 8
+#define TPS65910_REG_VAUX1 9
+#define TPS65910_REG_VAUX2 10
+#define TPS65910_REG_VAUX33 11
+#define TPS65910_REG_VMMC 12
+
+#define TPS65911_REG_VDDCTRL 4
+#define TPS65911_REG_LDO1 5
+#define TPS65911_REG_LDO2 6
+#define TPS65911_REG_LDO3 7
+#define TPS65911_REG_LDO4 8
+#define TPS65911_REG_LDO5 9
+#define TPS65911_REG_LDO6 10
+#define TPS65911_REG_LDO7 11
+#define TPS65911_REG_LDO8 12
+
/**
* struct tps65910_board
* Board platform data may be used to initialize regulators.