x86: Use memblock to replace early_res
1. replace find_e820_area with memblock_find_in_range
2. replace reserve_early with memblock_x86_reserve_range
3. replace free_early with memblock_x86_free_range.
4. NO_BOOTMEM will switch to use memblock too.
5. use _e820, _early wrap in the patch, in following patch, will
replace them all
6. because memblock_x86_free_range support partial free, we can remove some special care
7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill()
so adjust some calling later in setup.c::setup_arch()
-- corruption_check and mptable_update
-v2: Move reserve_brk() early
Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range()
that could happen We have more then 128 RAM entry in E820 tables, and
memblock_x86_fill() could use memblock_find_in_range() to find a new place for
memblock.memory.region array.
and We don't need to use extend_brk() after fill_memblock_area()
So move reserve_brk() early before fill_memblock_area().
-v3: Move find_smp_config early
To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable
in right place.
-v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in
memblock.reserved already..
use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later.
-v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit
active_region for 32bit does include high pages
need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped()
-v6: Use current_limit instead
-v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L
-v8: Set memblock_can_resize early to handle EFI with more RAM entries
-v9: update after kmemleak changes in mainline
Suggested-by: David S. Miller <davem@davemloft.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b4ae4ac..bbe0aaf 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -31,6 +31,7 @@
#include <linux/apm_bios.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
+#include <linux/memblock.h>
#include <linux/seq_file.h>
#include <linux/console.h>
#include <linux/mca.h>
@@ -614,7 +615,7 @@
addr = find_ibft_region(&size);
if (size)
- reserve_early_overlap_ok(addr, addr + size, "ibft");
+ memblock_x86_reserve_range(addr, addr + size, "* ibft");
}
#ifdef CONFIG_X86_RESERVE_LOW_64K
@@ -708,6 +709,15 @@
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
}
+static u64 __init get_max_mapped(void)
+{
+ u64 end = max_pfn_mapped;
+
+ end <<= PAGE_SHIFT;
+
+ return end;
+}
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
@@ -891,8 +901,6 @@
*/
max_pfn = e820_end_of_ram_pfn();
- /* preallocate 4k for mptable mpc */
- early_reserve_e820_mpc_new();
/* update e820 for memory not covered by WB MTRRs */
mtrr_bp_init();
if (mtrr_trim_uncached_memory(max_pfn))
@@ -917,15 +925,6 @@
max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT;
#endif
-#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
- setup_bios_corruption_check();
-#endif
-
- printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
- max_pfn_mapped<<PAGE_SHIFT);
-
- reserve_brk();
-
/*
* Find and reserve possible boot-time SMP configuration:
*/
@@ -933,6 +932,26 @@
reserve_ibft_region();
+ /*
+ * Need to conclude brk, before memblock_x86_fill()
+ * it could use memblock_find_in_range, could overlap with
+ * brk area.
+ */
+ reserve_brk();
+
+ memblock.current_limit = get_max_mapped();
+ memblock_x86_fill();
+
+ /* preallocate 4k for mptable mpc */
+ early_reserve_e820_mpc_new();
+
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+ setup_bios_corruption_check();
+#endif
+
+ printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
+ max_pfn_mapped<<PAGE_SHIFT);
+
reserve_trampoline_memory();
#ifdef CONFIG_ACPI_SLEEP
@@ -956,6 +975,7 @@
max_low_pfn = max_pfn;
}
#endif
+ memblock.current_limit = get_max_mapped();
/*
* NOTE: On x86-32, only from this point on, fixmaps are ready for use.
@@ -995,7 +1015,7 @@
initmem_init(0, max_pfn, acpi, k8);
#ifndef CONFIG_NO_BOOTMEM
- early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
+ memblock_x86_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
#endif
dma32_reserve_bootmem();