ARM: dts: imx6q-sabrelite: add usb devices
- add usbphy devices
- add usb host controller and otg devices
- add usb h1 vbus regulator
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index e0ec929..46fdfd1 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -42,9 +42,30 @@
};
};
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_hog>;
+
+ gpios {
+ pinctrl_gpio_hog: gpiohog {
+ fsl,pins = <
+ 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+ >;
+ };
+ };
+ };
};
aips-bus@02100000 { /* AIPS2 */
+ usb@02184000 { /* USB OTG */
+ vbus-supply = <®_usb_otg_vbus>;
+ status = "okay";
+ };
+
+ usb@02184200 { /* USB1 */
+ status = "okay";
+ };
+
ethernet@02188000 {
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
@@ -111,6 +132,15 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
};
sound {