Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang:
- CBUS driver (an I2C variant)
- continued rework of the omap driver
- s3c2410 gets lots of fixes and gains pinctrl support
- at91 gains DMA support
- the GPIO muxer gains devicetree probing
- typical fixes and additions all over
* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits)
i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
i2c: at91: add dma support
i2c: at91: change struct members indentation
i2c: at91: fix compilation warning
i2c: mxs: Do not disable the I2C SMBus quick mode
i2c: mxs: Handle i2c DMA failure properly
i2c: s3c2410: Remove recently introduced performance overheads
i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block
i2c: s3c2410: Add fix for i2c suspend/resume
i2c: s3c2410: Fix code to free gpios
i2c: i2c-cbus-gpio: introduce driver
i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions
i2c: ocores: Add irq support for sparc
i2c: omap: Move the remove constraint
ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
i2c: s3c2410: do not special case HDMIPHY stuck bus detection
i2c: s3c2410: use exponential back off while polling for bus idle
i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY
i2c: s3c2410: grab adapter lock while changing i2c clock
i2c: s3c2410: Add support for pinctrl
...
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index a4e167c..0abb30f 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -16,10 +16,12 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/stddef.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/platform_data/i2c-cbus-gpio.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/mfd/menelaus.h>
@@ -40,6 +42,45 @@
#define TUSB6010_GPIO_ENABLE 0
#define TUSB6010_DMACHAN 0x3f
+#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+static struct i2c_cbus_platform_data n8x0_cbus_data = {
+ .clk_gpio = 66,
+ .dat_gpio = 65,
+ .sel_gpio = 64,
+};
+
+static struct platform_device n8x0_cbus_device = {
+ .name = "i2c-cbus-gpio",
+ .id = 3,
+ .dev = {
+ .platform_data = &n8x0_cbus_data,
+ },
+};
+
+static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = {
+ {
+ I2C_BOARD_INFO("retu-mfd", 0x01),
+ },
+};
+
+static void __init n8x0_cbus_init(void)
+{
+ const int retu_irq_gpio = 108;
+
+ if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
+ return;
+ irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
+ n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio);
+ i2c_register_board_info(3, n8x0_i2c_board_info_3,
+ ARRAY_SIZE(n8x0_i2c_board_info_3));
+ platform_device_register(&n8x0_cbus_device);
+}
+#else /* CONFIG_I2C_CBUS_GPIO */
+static void __init n8x0_cbus_init(void)
+{
+}
+#endif /* CONFIG_I2C_CBUS_GPIO */
+
#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/*
* Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
@@ -678,6 +719,7 @@
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
+ n8x0_cbus_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fbb9b15..df6d6acb 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -120,6 +120,16 @@
return ports;
}
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+ omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
static const char name[] = "omap_i2c";
int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
@@ -157,6 +167,15 @@
dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
pdata->flags = dev_attr->flags;
+ /*
+ * When waiting for completion of a i2c transfer, we need to
+ * set a wake up latency constraint for the MPU. This is to
+ * ensure quick enough wakeup from idle, when transfer
+ * completes.
+ * Only omap3 has support for constraints
+ */
+ if (cpu_is_omap34xx())
+ pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
NULL, 0, 0);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 6c8fa70..d2d3840 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -77,8 +77,7 @@
static struct omap_i2c_dev_attr i2c_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_BUS_SHIFT_2 |
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 32820d8..081c71e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1118,8 +1118,7 @@
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
};
/* i2c1 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ec4499e..8bb2628 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -794,9 +794,7 @@
/* I2C1 */
static struct omap_i2c_dev_attr i2c1_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
@@ -821,9 +819,7 @@
/* I2C2 */
static struct omap_i2c_dev_attr i2c2_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
@@ -848,9 +844,7 @@
/* I2C3 */
static struct omap_i2c_dev_attr i2c3_dev_attr = {
.fifo_depth = 64, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index eb61cfd..272b017 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1529,8 +1529,7 @@
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
};
/* i2c1 */