| /* |
| * This file holds Hub protocol constants and data structures that are |
| * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. |
| * |
| * It is used/shared between the USB core, the HCDs and couple of other USB |
| * drivers. |
| */ |
| |
| #ifndef __LINUX_CH11_H |
| #define __LINUX_CH11_H |
| |
| #include <linux/types.h> /* __u8 etc */ |
| |
| /* |
| * Hub request types |
| */ |
| |
| #define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) |
| #define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) |
| |
| /* |
| * Hub class requests |
| * See USB 2.0 spec Table 11-16 |
| */ |
| #define HUB_CLEAR_TT_BUFFER 8 |
| #define HUB_RESET_TT 9 |
| #define HUB_GET_TT_STATE 10 |
| #define HUB_STOP_TT 11 |
| |
| /* |
| * Hub class additional requests defined by USB 3.0 spec |
| * See USB 3.0 spec Table 10-6 |
| */ |
| #define HUB_SET_DEPTH 12 |
| #define HUB_GET_PORT_ERR_COUNT 13 |
| |
| /* |
| * Hub Class feature numbers |
| * See USB 2.0 spec Table 11-17 |
| */ |
| #define C_HUB_LOCAL_POWER 0 |
| #define C_HUB_OVER_CURRENT 1 |
| |
| /* |
| * Port feature numbers |
| * See USB 2.0 spec Table 11-17 |
| */ |
| #define USB_PORT_FEAT_CONNECTION 0 |
| #define USB_PORT_FEAT_ENABLE 1 |
| #define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ |
| #define USB_PORT_FEAT_OVER_CURRENT 3 |
| #define USB_PORT_FEAT_RESET 4 |
| #define USB_PORT_FEAT_L1 5 /* L1 suspend */ |
| #define USB_PORT_FEAT_POWER 8 |
| #define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ |
| #define USB_PORT_FEAT_C_CONNECTION 16 |
| #define USB_PORT_FEAT_C_ENABLE 17 |
| #define USB_PORT_FEAT_C_SUSPEND 18 |
| #define USB_PORT_FEAT_C_OVER_CURRENT 19 |
| #define USB_PORT_FEAT_C_RESET 20 |
| #define USB_PORT_FEAT_TEST 21 |
| #define USB_PORT_FEAT_INDICATOR 22 |
| #define USB_PORT_FEAT_C_PORT_L1 23 |
| |
| /* |
| * Port feature selectors added by USB 3.0 spec. |
| * See USB 3.0 spec Table 10-7 |
| */ |
| #define USB_PORT_FEAT_LINK_STATE 5 |
| #define USB_PORT_FEAT_U1_TIMEOUT 23 |
| #define USB_PORT_FEAT_U2_TIMEOUT 24 |
| #define USB_PORT_FEAT_C_PORT_LINK_STATE 25 |
| #define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 |
| #define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 |
| #define USB_PORT_FEAT_BH_PORT_RESET 28 |
| #define USB_PORT_FEAT_C_BH_PORT_RESET 29 |
| #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 |
| |
| #define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) |
| |
| /* USB 3.0 hub remote wake mask bits, see table 10-14 */ |
| #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) |
| #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) |
| #define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) |
| |
| /* |
| * Hub Status and Hub Change results |
| * See USB 2.0 spec Table 11-19 and Table 11-20 |
| */ |
| struct usb_port_status { |
| __le16 wPortStatus; |
| __le16 wPortChange; |
| } __attribute__ ((packed)); |
| |
| /* |
| * wPortStatus bit field |
| * See USB 2.0 spec Table 11-21 |
| */ |
| #define USB_PORT_STAT_CONNECTION 0x0001 |
| #define USB_PORT_STAT_ENABLE 0x0002 |
| #define USB_PORT_STAT_SUSPEND 0x0004 |
| #define USB_PORT_STAT_OVERCURRENT 0x0008 |
| #define USB_PORT_STAT_RESET 0x0010 |
| #define USB_PORT_STAT_L1 0x0020 |
| /* bits 6 to 7 are reserved */ |
| #define USB_PORT_STAT_POWER 0x0100 |
| #define USB_PORT_STAT_LOW_SPEED 0x0200 |
| #define USB_PORT_STAT_HIGH_SPEED 0x0400 |
| #define USB_PORT_STAT_TEST 0x0800 |
| #define USB_PORT_STAT_INDICATOR 0x1000 |
| /* bits 13 to 15 are reserved */ |
| |
| /* |
| * Additions to wPortStatus bit field from USB 3.0 |
| * See USB 3.0 spec Table 10-10 |
| */ |
| #define USB_PORT_STAT_LINK_STATE 0x01e0 |
| #define USB_SS_PORT_STAT_POWER 0x0200 |
| #define USB_SS_PORT_STAT_SPEED 0x1c00 |
| #define USB_PORT_STAT_SPEED_5GBPS 0x0000 |
| /* Valid only if port is enabled */ |
| /* Bits that are the same from USB 2.0 */ |
| #define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ |
| USB_PORT_STAT_ENABLE | \ |
| USB_PORT_STAT_OVERCURRENT | \ |
| USB_PORT_STAT_RESET) |
| |
| /* |
| * Definitions for PORT_LINK_STATE values |
| * (bits 5-8) in wPortStatus |
| */ |
| #define USB_SS_PORT_LS_U0 0x0000 |
| #define USB_SS_PORT_LS_U1 0x0020 |
| #define USB_SS_PORT_LS_U2 0x0040 |
| #define USB_SS_PORT_LS_U3 0x0060 |
| #define USB_SS_PORT_LS_SS_DISABLED 0x0080 |
| #define USB_SS_PORT_LS_RX_DETECT 0x00a0 |
| #define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 |
| #define USB_SS_PORT_LS_POLLING 0x00e0 |
| #define USB_SS_PORT_LS_RECOVERY 0x0100 |
| #define USB_SS_PORT_LS_HOT_RESET 0x0120 |
| #define USB_SS_PORT_LS_COMP_MOD 0x0140 |
| #define USB_SS_PORT_LS_LOOPBACK 0x0160 |
| |
| /* |
| * wPortChange bit field |
| * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 |
| * Bits 0 to 5 shown, bits 6 to 15 are reserved |
| */ |
| #define USB_PORT_STAT_C_CONNECTION 0x0001 |
| #define USB_PORT_STAT_C_ENABLE 0x0002 |
| #define USB_PORT_STAT_C_SUSPEND 0x0004 |
| #define USB_PORT_STAT_C_OVERCURRENT 0x0008 |
| #define USB_PORT_STAT_C_RESET 0x0010 |
| #define USB_PORT_STAT_C_L1 0x0020 |
| /* |
| * USB 3.0 wPortChange bit fields |
| * See USB 3.0 spec Table 10-11 |
| */ |
| #define USB_PORT_STAT_C_BH_RESET 0x0020 |
| #define USB_PORT_STAT_C_LINK_STATE 0x0040 |
| #define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 |
| |
| /* |
| * wHubCharacteristics (masks) |
| * See USB 2.0 spec Table 11-13, offset 3 |
| */ |
| #define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ |
| #define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ |
| #define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ |
| #define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ |
| |
| #define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ |
| |
| #define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ |
| #define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ |
| #define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ |
| #define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ |
| |
| #define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ |
| #define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ |
| |
| struct usb_hub_status { |
| __le16 wHubStatus; |
| __le16 wHubChange; |
| } __attribute__ ((packed)); |
| |
| /* |
| * Hub Status & Hub Change bit masks |
| * See USB 2.0 spec Table 11-19 and Table 11-20 |
| * Bits 0 and 1 for wHubStatus and wHubChange |
| * Bits 2 to 15 are reserved for both |
| */ |
| #define HUB_STATUS_LOCAL_POWER 0x0001 |
| #define HUB_STATUS_OVERCURRENT 0x0002 |
| #define HUB_CHANGE_LOCAL_POWER 0x0001 |
| #define HUB_CHANGE_OVERCURRENT 0x0002 |
| |
| |
| /* |
| * Hub descriptor |
| * See USB 2.0 spec Table 11-13 |
| */ |
| |
| #define USB_DT_HUB (USB_TYPE_CLASS | 0x09) |
| #define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) |
| #define USB_DT_HUB_NONVAR_SIZE 7 |
| #define USB_DT_SS_HUB_SIZE 12 |
| |
| /* |
| * Hub Device descriptor |
| * USB Hub class device protocols |
| */ |
| |
| #define USB_HUB_PR_FS 0 /* Full speed hub */ |
| #define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ |
| #define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ |
| #define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ |
| #define USB_HUB_PR_SS 3 /* Super speed hub */ |
| |
| struct usb_hub_descriptor { |
| __u8 bDescLength; |
| __u8 bDescriptorType; |
| __u8 bNbrPorts; |
| __le16 wHubCharacteristics; |
| __u8 bPwrOn2PwrGood; |
| __u8 bHubContrCurrent; |
| |
| /* 2.0 and 3.0 hubs differ here */ |
| union { |
| struct { |
| /* add 1 bit for hub status change; round to bytes */ |
| __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; |
| __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; |
| } __attribute__ ((packed)) hs; |
| |
| struct { |
| __u8 bHubHdrDecLat; |
| __le16 wHubDelay; |
| __le16 DeviceRemovable; |
| } __attribute__ ((packed)) ss; |
| } u; |
| } __attribute__ ((packed)); |
| |
| /* port indicator status selectors, tables 11-7 and 11-25 */ |
| #define HUB_LED_AUTO 0 |
| #define HUB_LED_AMBER 1 |
| #define HUB_LED_GREEN 2 |
| #define HUB_LED_OFF 3 |
| |
| enum hub_led_mode { |
| INDICATOR_AUTO = 0, |
| INDICATOR_CYCLE, |
| /* software blinks for attention: software, hardware, reserved */ |
| INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, |
| INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, |
| INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF |
| } __attribute__ ((packed)); |
| |
| /* Transaction Translator Think Times, in bits */ |
| #define HUB_TTTT_8_BITS 0x00 |
| #define HUB_TTTT_16_BITS 0x20 |
| #define HUB_TTTT_24_BITS 0x40 |
| #define HUB_TTTT_32_BITS 0x60 |
| |
| #endif /* __LINUX_CH11_H */ |