b43: disable parity check on BCMA devices
Analyze of MMIO dumps from BCM43224, BCM43225, BCM4313 and BCM4331 has
shown that wl disables parity check for all that cards. This is required
for receiving any packets from the hardware.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index ce572ae..78c5c82 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -659,6 +659,7 @@
u32 value;
u32 addrext;
u32 trans = ring->dev->dma.translation;
+ bool parity = ring->dev->dma.parity;
if (ring->tx) {
if (ring->type == B43_DMA_64BIT) {
@@ -669,6 +670,8 @@
value = B43_DMA64_TXENABLE;
value |= (addrext << B43_DMA64_TXADDREXT_SHIFT)
& B43_DMA64_TXADDREXT_MASK;
+ if (!parity)
+ value |= B43_DMA64_TXPARITYDISABLE;
b43_dma_write(ring, B43_DMA64_TXCTL, value);
b43_dma_write(ring, B43_DMA64_TXRINGLO,
(ringbase & 0xFFFFFFFF));
@@ -684,6 +687,8 @@
value = B43_DMA32_TXENABLE;
value |= (addrext << B43_DMA32_TXADDREXT_SHIFT)
& B43_DMA32_TXADDREXT_MASK;
+ if (!parity)
+ value |= B43_DMA32_TXPARITYDISABLE;
b43_dma_write(ring, B43_DMA32_TXCTL, value);
b43_dma_write(ring, B43_DMA32_TXRING,
(ringbase & ~SSB_DMA_TRANSLATION_MASK)
@@ -702,6 +707,8 @@
value |= B43_DMA64_RXENABLE;
value |= (addrext << B43_DMA64_RXADDREXT_SHIFT)
& B43_DMA64_RXADDREXT_MASK;
+ if (!parity)
+ value |= B43_DMA64_RXPARITYDISABLE;
b43_dma_write(ring, B43_DMA64_RXCTL, value);
b43_dma_write(ring, B43_DMA64_RXRINGLO,
(ringbase & 0xFFFFFFFF));
@@ -720,6 +727,8 @@
value |= B43_DMA32_RXENABLE;
value |= (addrext << B43_DMA32_RXADDREXT_SHIFT)
& B43_DMA32_RXADDREXT_MASK;
+ if (!parity)
+ value |= B43_DMA32_RXPARITYDISABLE;
b43_dma_write(ring, B43_DMA32_RXCTL, value);
b43_dma_write(ring, B43_DMA32_RXRING,
(ringbase & ~SSB_DMA_TRANSLATION_MASK)
@@ -1064,6 +1073,13 @@
#endif
}
+ dma->parity = true;
+#ifdef CONFIG_B43_BCMA
+ /* TODO: find out which SSB devices need disabling parity */
+ if (dev->dev->bus_type == B43_BUS_BCMA)
+ dma->parity = false;
+#endif
+
err = -ENOMEM;
/* setup TX DMA channels. */
dma->tx_ring_AC_BK = b43_setup_dmaring(dev, 0, 1, type);