ASoC: Implement new DC servo readback mode for late WM8994 revisions
Later WM8994 devices implement a new DC servo readback mode with the
register used to access the offset moved to register 0x59. Implement
support for this and enable it on the appropriate devices.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 4cc2d56..84a84f4 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -18,6 +18,7 @@
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/mfd/wm8994/registers.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -116,14 +117,23 @@
{
struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
s8 offset;
- u16 reg, reg_l, reg_r, dcs_cfg;
+ u16 reg, reg_l, reg_r, dcs_cfg, dcs_reg;
+
+ switch (hubs->dcs_readback_mode) {
+ case 2:
+ dcs_reg = WM8994_DC_SERVO_4E;
+ break;
+ default:
+ dcs_reg = WM8993_DC_SERVO_3;
+ break;
+ }
/* If we're using a digital only path and have a previously
* callibrated DC servo offset stored then use that. */
if (hubs->class_w && hubs->class_w_dcs) {
dev_dbg(codec->dev, "Using cached DC servo offset %x\n",
hubs->class_w_dcs);
- snd_soc_write(codec, WM8993_DC_SERVO_3, hubs->class_w_dcs);
+ snd_soc_write(codec, dcs_reg, hubs->class_w_dcs);
wait_for_dc_servo(codec,
WM8993_DCS_TRIG_DAC_WR_0 |
WM8993_DCS_TRIG_DAC_WR_1);
@@ -154,8 +164,9 @@
reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
& WM8993_DCS_INTEG_CHAN_1_MASK;
break;
+ case 2:
case 1:
- reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+ reg = snd_soc_read(codec, dcs_reg);
reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
>> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
@@ -185,7 +196,7 @@
dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);
/* Do it */
- snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
+ snd_soc_write(codec, dcs_reg, dcs_cfg);
wait_for_dc_servo(codec,
WM8993_DCS_TRIG_DAC_WR_0 |
WM8993_DCS_TRIG_DAC_WR_1);