| /* | 
 |  * arch/i386/kernel/acpi/cstate.c | 
 |  * | 
 |  * Copyright (C) 2005 Intel Corporation | 
 |  * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> | 
 |  * 	- Added _PDC for SMP C-states on Intel CPUs | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/cpu.h> | 
 | #include <linux/sched.h> | 
 |  | 
 | #include <acpi/processor.h> | 
 | #include <asm/acpi.h> | 
 |  | 
 | /* | 
 |  * Initialize bm_flags based on the CPU cache properties | 
 |  * On SMP it depends on cache configuration | 
 |  * - When cache is not shared among all CPUs, we flush cache | 
 |  *   before entering C3. | 
 |  * - When cache is shared among all CPUs, we use bm_check | 
 |  *   mechanism as in UP case | 
 |  * | 
 |  * This routine is called only after all the CPUs are online | 
 |  */ | 
 | void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, | 
 | 					unsigned int cpu) | 
 | { | 
 | 	struct cpuinfo_x86 *c = cpu_data + cpu; | 
 |  | 
 | 	flags->bm_check = 0; | 
 | 	if (num_online_cpus() == 1) | 
 | 		flags->bm_check = 1; | 
 | 	else if (c->x86_vendor == X86_VENDOR_INTEL) { | 
 | 		/* | 
 | 		 * Today all CPUs that support C3 share cache. | 
 | 		 * TBD: This needs to look at cache shared map, once | 
 | 		 * multi-core detection patch makes to the base. | 
 | 		 */ | 
 | 		flags->bm_check = 1; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(acpi_processor_power_init_bm_check); | 
 |  | 
 | /* The code below handles cstate entry with monitor-mwait pair on Intel*/ | 
 |  | 
 | struct cstate_entry { | 
 | 	struct { | 
 | 		unsigned int eax; | 
 | 		unsigned int ecx; | 
 | 	} states[ACPI_PROCESSOR_MAX_POWER]; | 
 | }; | 
 | static struct cstate_entry *cpu_cstate_entry;	/* per CPU ptr */ | 
 |  | 
 | static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; | 
 |  | 
 | #define MWAIT_SUBSTATE_MASK	(0xf) | 
 | #define MWAIT_SUBSTATE_SIZE	(4) | 
 |  | 
 | #define CPUID_MWAIT_LEAF (5) | 
 | #define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1) | 
 | #define CPUID5_ECX_INTERRUPT_BREAK	(0x2) | 
 |  | 
 | #define MWAIT_ECX_INTERRUPT_BREAK	(0x1) | 
 |  | 
 | #define NATIVE_CSTATE_BEYOND_HALT	(2) | 
 |  | 
 | int acpi_processor_ffh_cstate_probe(unsigned int cpu, | 
 | 		struct acpi_processor_cx *cx, struct acpi_power_register *reg) | 
 | { | 
 | 	struct cstate_entry *percpu_entry; | 
 | 	struct cpuinfo_x86 *c = cpu_data + cpu; | 
 |  | 
 | 	cpumask_t saved_mask; | 
 | 	int retval; | 
 | 	unsigned int eax, ebx, ecx, edx; | 
 | 	unsigned int edx_part; | 
 | 	unsigned int cstate_type; /* C-state type and not ACPI C-state type */ | 
 | 	unsigned int num_cstate_subtype; | 
 |  | 
 | 	if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF ) | 
 | 		return -1; | 
 |  | 
 | 	if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT) | 
 | 		return -1; | 
 |  | 
 | 	percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); | 
 | 	percpu_entry->states[cx->index].eax = 0; | 
 | 	percpu_entry->states[cx->index].ecx = 0; | 
 |  | 
 | 	/* Make sure we are running on right CPU */ | 
 | 	saved_mask = current->cpus_allowed; | 
 | 	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu)); | 
 | 	if (retval) | 
 | 		return -1; | 
 |  | 
 | 	cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx); | 
 |  | 
 | 	/* Check whether this particular cx_type (in CST) is supported or not */ | 
 | 	cstate_type = (cx->address >> MWAIT_SUBSTATE_SIZE) + 1; | 
 | 	edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE); | 
 | 	num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK; | 
 |  | 
 | 	retval = 0; | 
 | 	if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) { | 
 | 		retval = -1; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */ | 
 | 	if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) || | 
 | 	    !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) { | 
 | 		retval = -1; | 
 | 		goto out; | 
 | 	} | 
 | 	percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK; | 
 |  | 
 | 	/* Use the hint in CST */ | 
 | 	percpu_entry->states[cx->index].eax = cx->address; | 
 |  | 
 | 	if (!mwait_supported[cstate_type]) { | 
 | 		mwait_supported[cstate_type] = 1; | 
 | 		printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d " | 
 | 		       "state\n", cx->type); | 
 | 	} | 
 |  | 
 | out: | 
 | 	set_cpus_allowed(current, saved_mask); | 
 | 	return retval; | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); | 
 |  | 
 | void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx) | 
 | { | 
 | 	unsigned int cpu = smp_processor_id(); | 
 | 	struct cstate_entry *percpu_entry; | 
 |  | 
 | 	percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); | 
 | 	mwait_idle_with_hints(percpu_entry->states[cx->index].eax, | 
 | 	                      percpu_entry->states[cx->index].ecx); | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter); | 
 |  | 
 | static int __init ffh_cstate_init(void) | 
 | { | 
 | 	struct cpuinfo_x86 *c = &boot_cpu_data; | 
 | 	if (c->x86_vendor != X86_VENDOR_INTEL) | 
 | 		return -1; | 
 |  | 
 | 	cpu_cstate_entry = alloc_percpu(struct cstate_entry); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit ffh_cstate_exit(void) | 
 | { | 
 | 	free_percpu(cpu_cstate_entry); | 
 | 	cpu_cstate_entry = NULL; | 
 | } | 
 |  | 
 | arch_initcall(ffh_cstate_init); | 
 | __exitcall(ffh_cstate_exit); |