| /* | 
 |  * drivers/mtd/maps/tqm834x.c | 
 |  * | 
 |  * MTD mapping driver for TQM834x boards | 
 |  * | 
 |  * Copyright 2005 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>. | 
 |  * | 
 |  * This file is licensed under the terms of the GNU General Public License | 
 |  * version 2.  This program is licensed "as is" without any warranty of any | 
 |  * kind, whether express or implied. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <asm/io.h> | 
 | #include <asm/ppcboot.h> | 
 |  | 
 | #include <linux/mtd/mtd.h> | 
 | #include <linux/mtd/map.h> | 
 | #include <linux/mtd/partitions.h> | 
 |  | 
 | #define FLASH_BANK_MAX	2 | 
 |  | 
 | extern unsigned char __res[]; | 
 |  | 
 | /* trivial struct to describe partition information */ | 
 | struct mtd_part_def | 
 | { | 
 | 	int nums; | 
 | 	unsigned char *type; | 
 | 	struct mtd_partition* mtd_part; | 
 | }; | 
 |  | 
 | static struct mtd_info* mtd_banks[FLASH_BANK_MAX]; | 
 | static struct map_info* map_banks[FLASH_BANK_MAX]; | 
 | static struct mtd_part_def part_banks[FLASH_BANK_MAX]; | 
 |  | 
 | static unsigned long num_banks; | 
 | static unsigned long start_scan_addr; | 
 |  | 
 | #ifdef CONFIG_MTD_PARTITIONS | 
 | /* | 
 |  * The following defines the partition layout of TQM834x boards. | 
 |  * | 
 |  * See include/linux/mtd/partitions.h for definition of the | 
 |  * mtd_partition structure. | 
 |  * | 
 |  * Assume minimal initial size of 4 MiB per bank, will be updated | 
 |  * later in init_tqm834x_mtd() routine. | 
 |  */ | 
 |  | 
 | /* Partition definition for the first flash bank which is always present. */ | 
 | static struct mtd_partition tqm834x_partitions_bank1[] = { | 
 | 	{ | 
 | 		.name	= "u-boot",		/* u-boot firmware	*/ | 
 | 		.offset	= 0x00000000, | 
 | 		.size	= 0x00040000,		/* 256 KiB		*/ | 
 | 		/*mask_flags: MTD_WRITEABLE,	 * force read-only	*/ | 
 | 	}, | 
 | 	{ | 
 | 		.name	= "env",		/* u-boot environment	*/ | 
 | 		.offset	= 0x00040000, | 
 | 		.size	= 0x00020000,		/* 128 KiB		*/ | 
 | 		/*mask_flags: MTD_WRITEABLE,	 * force read-only	*/ | 
 | 	}, | 
 | 	{ | 
 | 		.name	= "kernel",		/* linux kernel image	*/ | 
 | 		.offset	= 0x00060000, | 
 | 		.size	= 0x00100000,		/* 1 MiB		*/ | 
 | 		/*mask_flags: MTD_WRITEABLE,	 * force read-only	*/ | 
 | 	}, | 
 | 	{ | 
 | 		.name	= "initrd",		/* ramdisk image	*/ | 
 | 		.offset	= 0x00160000, | 
 | 		.size	= 0x00200000,		/* 2 MiB		*/ | 
 | 	}, | 
 | 	{ | 
 | 		.name	= "user",		/* user data		*/ | 
 | 		.offset	= 0x00360000, | 
 | 		.size	= 0x000a0000,		/* remaining space	*/ | 
 | 		/* NOTE: this parttion size is re-calcated in		*/ | 
 | 		/* init_tqm834x_mtd() to cover actual remaining space.	*/ | 
 | 	}, | 
 | }; | 
 |  | 
 | /* Partition definition for the second flash bank which may be present on some | 
 |  * TQM834x boards. | 
 |  */ | 
 | static struct mtd_partition tqm834x_partitions_bank2[] = { | 
 | 	{ | 
 | 		.name	= "jffs2",		/* jffs2 filesystem	*/ | 
 | 		.offset	= 0x00000000, | 
 | 		.size	= 0x00400000,		/* whole device		*/ | 
 | 		/* NOTE: this parttion size is re-calcated in		*/ | 
 | 		/* init_tqm834x_mtd() to cover actual device size.	*/ | 
 | 	}, | 
 | }; | 
 |  | 
 | #endif	/* CONFIG_MTD_PARTITIONS */ | 
 |  | 
 | static int __init init_tqm834x_mtd(void) | 
 | { | 
 | 	int idx = 0, ret = 0; | 
 | 	unsigned long flash_addr, flash_size, mtd_size = 0; | 
 |  | 
 | 	/* pointer to TQM834x board info data */ | 
 | 	bd_t *bd = (bd_t *)__res; | 
 | #ifdef CONFIG_MTD_CMDLINE_PARTS | 
 | 	int n; | 
 | 	char mtdid[4]; | 
 | 	const char *part_probes[] = { "cmdlinepart", NULL }; | 
 | #endif | 
 |  | 
 | 	flash_addr = bd->bi_flashstart; | 
 | 	flash_size = bd->bi_flashsize; | 
 |  | 
 | 	/* request maximum flash size address space */ | 
 | 	start_scan_addr = (unsigned long)ioremap(flash_addr, flash_size); | 
 | 	if (!start_scan_addr) { | 
 | 		printk("%s: Failed to ioremap address: 0x%lx\n", | 
 | 		       __FUNCTION__, flash_addr); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { | 
 | 		if (mtd_size >= flash_size) | 
 | 			break; | 
 |  | 
 | 		pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx); | 
 |  | 
 | 		map_banks[idx] = | 
 | 			(struct map_info *)kmalloc(sizeof(struct map_info), | 
 | 						   GFP_KERNEL); | 
 | 		if (map_banks[idx] == NULL) { | 
 | 			ret = -ENOMEM; | 
 | 			goto error_mem; | 
 | 		} | 
 | 		memset((void *)map_banks[idx], 0, sizeof(struct map_info)); | 
 | 		map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL); | 
 | 		if (map_banks[idx]->name == NULL) { | 
 | 			ret = -ENOMEM; | 
 | 			goto error_mem; | 
 | 		} | 
 | 		memset((void *)map_banks[idx]->name, 0, 16); | 
 |  | 
 | 		sprintf(map_banks[idx]->name, "TQM834x-%d", idx); | 
 | 		map_banks[idx]->size = flash_size; | 
 | 		map_banks[idx]->bankwidth = 4; | 
 |  | 
 | 		simple_map_init(map_banks[idx]); | 
 |  | 
 | 		map_banks[idx]->virt = (void __iomem *) | 
 | 			(start_scan_addr + ((idx > 0) ? | 
 | 			(mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0)); | 
 | 		map_banks[idx]->phys = | 
 | 			flash_addr + ((idx > 0) ? | 
 | 			(mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0); | 
 |  | 
 | 		/* start to probe flash chips */ | 
 | 		mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]); | 
 | 		if (mtd_banks[idx]) { | 
 | 			mtd_banks[idx]->owner = THIS_MODULE; | 
 | 			mtd_size += mtd_banks[idx]->size; | 
 | 			num_banks++; | 
 | 			pr_debug("%s: bank %ld, name: %s, size: %d bytes \n", | 
 | 				 __FUNCTION__, num_banks, | 
 | 				 mtd_banks[idx]->name, mtd_banks[idx]->size); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* no supported flash chips found */ | 
 | 	if (!num_banks) { | 
 | 		printk("TQM834x: No supported flash chips found!\n"); | 
 | 		ret = -ENXIO; | 
 | 		goto error_mem; | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_MTD_PARTITIONS | 
 | 	/* | 
 | 	 * Select static partition definitions | 
 | 	 */ | 
 | 	n = ARRAY_SIZE(tqm834x_partitions_bank1); | 
 | 	part_banks[0].mtd_part	= tqm834x_partitions_bank1; | 
 | 	part_banks[0].type	= "static image bank1"; | 
 | 	part_banks[0].nums	= n; | 
 |  | 
 | 	/* update last partition size to cover actual remaining space */ | 
 | 	tqm834x_partitions_bank1[n - 1].size = | 
 | 		mtd_banks[0]->size - | 
 | 		tqm834x_partitions_bank1[n - 1].offset; | 
 |  | 
 | 	/* check if we have second bank? */ | 
 | 	if (num_banks == 2) { | 
 | 		n = ARRAY_SIZE(tqm834x_partitions_bank2); | 
 | 		part_banks[1].mtd_part	= tqm834x_partitions_bank2; | 
 | 		part_banks[1].type	= "static image bank2"; | 
 | 		part_banks[1].nums	= n; | 
 |  | 
 | 		/* update last partition size to cover actual remaining space */ | 
 | 		tqm834x_partitions_bank2[n - 1].size = | 
 | 			mtd_banks[1]->size - | 
 | 			tqm834x_partitions_bank2[n - 1].offset; | 
 | 	} | 
 |  | 
 | 	for(idx = 0; idx < num_banks ; idx++) { | 
 | #ifdef CONFIG_MTD_CMDLINE_PARTS | 
 | 		sprintf(mtdid, "%d", idx); | 
 | 		n = parse_mtd_partitions(mtd_banks[idx], | 
 | 					 part_probes, | 
 | 					 &part_banks[idx].mtd_part, | 
 | 					 0); | 
 | 		pr_debug("%s: %d command line partitions on bank %s\n", | 
 | 			 __FUNCTION__, n, mtdid); | 
 | 		if (n > 0) { | 
 | 			part_banks[idx].type = "command line"; | 
 | 			part_banks[idx].nums = n; | 
 | 		} | 
 | #endif	/* CONFIG_MTD_CMDLINE_PARTS */ | 
 | 		if (part_banks[idx].nums == 0) { | 
 | 			printk(KERN_NOTICE | 
 | 			       "TQM834x flash bank %d: no partition info " | 
 | 			       "available, registering whole device\n", idx); | 
 | 			add_mtd_device(mtd_banks[idx]); | 
 | 		} else { | 
 | 			printk(KERN_NOTICE | 
 | 			       "TQM834x flash bank %d: Using %s partition " | 
 | 			       "definition\n", idx, part_banks[idx].type); | 
 | 			add_mtd_partitions(mtd_banks[idx], | 
 | 					   part_banks[idx].mtd_part, | 
 | 					   part_banks[idx].nums); | 
 | 		} | 
 | 	} | 
 | #else	/* ! CONFIG_MTD_PARTITIONS */ | 
 | 	printk(KERN_NOTICE "TQM834x flash: registering %d flash banks " | 
 | 			"at once\n", num_banks); | 
 |  | 
 | 	for(idx = 0 ; idx < num_banks ; idx++) | 
 | 		add_mtd_device(mtd_banks[idx]); | 
 |  | 
 | #endif	/* CONFIG_MTD_PARTITIONS */ | 
 |  | 
 | 	return 0; | 
 | error_mem: | 
 | 	for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { | 
 | 		if (map_banks[idx] != NULL) { | 
 | 			if (map_banks[idx]->name != NULL) { | 
 | 				kfree(map_banks[idx]->name); | 
 | 				map_banks[idx]->name = NULL; | 
 | 			} | 
 | 			kfree(map_banks[idx]); | 
 | 			map_banks[idx] = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	iounmap((void *)start_scan_addr); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit cleanup_tqm834x_mtd(void) | 
 | { | 
 | 	unsigned int idx = 0; | 
 | 	for(idx = 0 ; idx < num_banks ; idx++) { | 
 | 		/* destroy mtd_info previously allocated */ | 
 | 		if (mtd_banks[idx]) { | 
 | 			del_mtd_partitions(mtd_banks[idx]); | 
 | 			map_destroy(mtd_banks[idx]); | 
 | 		} | 
 |  | 
 | 		/* release map_info not used anymore */ | 
 | 		kfree(map_banks[idx]->name); | 
 | 		kfree(map_banks[idx]); | 
 | 	} | 
 |  | 
 | 	if (start_scan_addr) { | 
 | 		iounmap((void *)start_scan_addr); | 
 | 		start_scan_addr = 0; | 
 | 	} | 
 | } | 
 |  | 
 | module_init(init_tqm834x_mtd); | 
 | module_exit(cleanup_tqm834x_mtd); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Wolfgang Denk <wd@denx.de>"); | 
 | MODULE_DESCRIPTION("MTD map driver for TQM834x boards"); |