[SCSI] qla2xxx: Code changes to support new dynamic logging infrastructure.
The code is changed to support the new dynamic logging infrastructure.
Following are the levels added.
Default is 0 - no logging. 0x40000000 - Module Init & Probe.
0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.
0x08000000 - IO tracing. 0x04000000 - DPC Thread.
0x02000000 - Async events. 0x01000000 - Timer routines.
0x00800000 - User space. 0x00400000 - Task Management.
0x00200000 - AER/EEH. 0x00100000 - Multi Q.
0x00080000 - P3P Specific. 0x00040000 - Virtual Port.
0x00020000 - Buffer Dump. 0x00010000 - Misc.
0x7fffffff - For enabling all logs, can be too many logs.
Setting ql2xextended_error_logging module parameter to any of the above
value, will enable the debug for that particular level.
Do LOGICAL OR of the value to enable more than one level.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 3d03845..def6942 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -153,11 +153,10 @@
fc_port_t *fcport = sp->fcport;
struct srb_ctx *ctx = sp->ctx;
- DEBUG2(printk(KERN_WARNING
- "scsi(%ld:%x): Async-%s timeout - portid=%02x%02x%02x.\n",
- fcport->vha->host_no, sp->handle,
- ctx->name, fcport->d_id.b.domain,
- fcport->d_id.b.area, fcport->d_id.b.al_pa));
+ ql_dbg(ql_dbg_disc, fcport->vha, 0x2071,
+ "Async-%s timeout - portid=%02x%02x%02x.\n",
+ ctx->name, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
fcport->flags &= ~FCF_ASYNC_SENT;
if (ctx->type == SRB_LOGIN_CMD) {
@@ -211,11 +210,10 @@
if (rval != QLA_SUCCESS)
goto done_free_sp;
- DEBUG2(printk(KERN_DEBUG
- "scsi(%ld:%x): Async-login - loop-id=%x portid=%02x%02x%02x "
- "retries=%d.\n", fcport->vha->host_no, sp->handle, fcport->loop_id,
- fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa,
- fcport->login_retry));
+ ql_dbg(ql_dbg_disc, vha, 0x2072,
+ "Async-login - loopid=%x portid=%02x%02x%02x retries=%d.\n",
+ fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa, fcport->login_retry);
return rval;
done_free_sp:
@@ -259,10 +257,10 @@
if (rval != QLA_SUCCESS)
goto done_free_sp;
- DEBUG2(printk(KERN_DEBUG
- "scsi(%ld:%x): Async-logout - loop-id=%x portid=%02x%02x%02x.\n",
- fcport->vha->host_no, sp->handle, fcport->loop_id,
- fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa));
+ ql_dbg(ql_dbg_disc, vha, 0x2070,
+ "Async-logout - loop-id=%x portid=%02x%02x%02x.\n",
+ fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
return rval;
done_free_sp:
@@ -309,11 +307,10 @@
if (rval != QLA_SUCCESS)
goto done_free_sp;
- DEBUG2(printk(KERN_DEBUG
- "scsi(%ld:%x): Async-adisc - loop-id=%x portid=%02x%02x%02x.\n",
- fcport->vha->host_no, sp->handle, fcport->loop_id,
- fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa));
-
+ ql_dbg(ql_dbg_disc, vha, 0x206f,
+ "Async-adisc - loopid=%x portid=%02x%02x%02x.\n",
+ fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
return rval;
done_free_sp:
@@ -362,11 +359,10 @@
if (rval != QLA_SUCCESS)
goto done_free_sp;
- DEBUG2(printk(KERN_DEBUG
- "scsi(%ld:%x): Async-tmf - loop-id=%x portid=%02x%02x%02x.\n",
- fcport->vha->host_no, sp->handle, fcport->loop_id,
- fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa));
-
+ ql_dbg(ql_dbg_taskm, vha, 0x802f,
+ "Async-tmf loop-id=%x portid=%02x%02x%02x.\n",
+ fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
return rval;
done_free_sp:
@@ -471,9 +467,8 @@
flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID);
if ((rval != QLA_SUCCESS) || iocb->u.tmf.data) {
- DEBUG2_3_11(printk(KERN_WARNING
- "%s(%ld): TM IOCB failed (%x).\n",
- __func__, vha->host_no, rval));
+ ql_dbg(ql_dbg_taskm, vha, 0x8030,
+ "TM IOCB failed (%x).\n", rval);
}
return;
@@ -519,11 +514,12 @@
set_bit(0, ha->req_qid_map);
set_bit(0, ha->rsp_qid_map);
- qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
+ ql_log(ql_log_info, vha, 0x0040,
+ "Configuring PCI space...\n");
rval = ha->isp_ops->pci_config(vha);
if (rval) {
- DEBUG2(printk("scsi(%ld): Unable to configure PCI space.\n",
- vha->host_no));
+ ql_log(ql_log_warn, vha, 0x0044,
+ "Unable to configure PCI space.\n");
return (rval);
}
@@ -531,20 +527,21 @@
rval = qla2xxx_get_flash_info(vha);
if (rval) {
- DEBUG2(printk("scsi(%ld): Unable to validate FLASH data.\n",
- vha->host_no));
+ ql_log(ql_log_fatal, vha, 0x004f,
+ "Unable to validate FLASH data.\n");
return (rval);
}
ha->isp_ops->get_flash_version(vha, req->ring);
-
- qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
+ ql_log(ql_log_info, vha, 0x0061,
+ "Configure NVRAM parameters...\n");
ha->isp_ops->nvram_config(vha);
if (ha->flags.disable_serdes) {
/* Mask HBA via NVRAM settings? */
- qla_printk(KERN_INFO, ha, "Masking HBA WWPN "
+ ql_log(ql_log_info, vha, 0x0077,
+ "Masking HBA WWPN "
"%02x%02x%02x%02x%02x%02x%02x%02x (via NVRAM).\n",
vha->port_name[0], vha->port_name[1],
vha->port_name[2], vha->port_name[3],
@@ -553,7 +550,8 @@
return QLA_FUNCTION_FAILED;
}
- qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
+ ql_log(ql_log_info, vha, 0x0078,
+ "Verifying loaded RISC code...\n");
if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) {
rval = ha->isp_ops->chip_diag(vha);
@@ -567,7 +565,7 @@
if (IS_QLA84XX(ha)) {
ha->cs84xx = qla84xx_get_chip(vha);
if (!ha->cs84xx) {
- qla_printk(KERN_ERR, ha,
+ ql_log(ql_log_warn, vha, 0x00d0,
"Unable to configure ISP84XX.\n");
return QLA_FUNCTION_FAILED;
}
@@ -579,8 +577,8 @@
/* Issue verify 84xx FW IOCB to complete 84xx initialization */
rval = qla84xx_init_chip(vha);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_ERR, ha,
- "Unable to initialize ISP84XX.\n");
+ ql_log(ql_log_warn, vha, 0x00d4,
+ "Unable to initialize ISP84XX.\n");
qla84xx_put_chip(vha);
}
}
@@ -797,9 +795,7 @@
rval = QLA_FUNCTION_FAILED;
if (ha->flags.disable_risc_code_load) {
- DEBUG2(printk("scsi(%ld): RISC CODE NOT loaded\n",
- vha->host_no));
- qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n");
+ ql_log(ql_log_info, vha, 0x0079, "RISC CODE NOT loaded.\n");
/* Verify checksum of loaded RISC code. */
rval = qla2x00_verify_checksum(vha, ha->fw_srisc_address);
@@ -810,10 +806,9 @@
}
}
- if (rval) {
- DEBUG2_3(printk("scsi(%ld): **** Load RISC code ****\n",
- vha->host_no));
- }
+ if (rval)
+ ql_dbg(ql_dbg_init, vha, 0x007a,
+ "**** Load RISC code ****.\n");
return (rval);
}
@@ -1105,8 +1100,8 @@
/* Assume a failed state */
rval = QLA_FUNCTION_FAILED;
- DEBUG3(printk("scsi(%ld): Testing device at %lx.\n",
- vha->host_no, (u_long)®->flash_address));
+ ql_dbg(ql_dbg_init, vha, 0x007b,
+ "Testing device at %lx.\n", (u_long)®->flash_address);
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -1128,8 +1123,8 @@
if (!cnt)
goto chip_diag_failed;
- DEBUG3(printk("scsi(%ld): Reset register cleared by chip reset\n",
- vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x007c,
+ "Reset register cleared by chip reset.\n");
/* Reset RISC processor. */
WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
@@ -1150,7 +1145,7 @@
goto chip_diag_failed;
/* Check product ID of chip */
- DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x007d, "Checking product Id of chip.\n");
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
@@ -1158,8 +1153,9 @@
mb[4] = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 4));
if (mb[1] != PROD_ID_1 || (mb[2] != PROD_ID_2 && mb[2] != PROD_ID_2a) ||
mb[3] != PROD_ID_3) {
- qla_printk(KERN_WARNING, ha,
- "Wrong product ID = 0x%x,0x%x,0x%x\n", mb[1], mb[2], mb[3]);
+ ql_log(ql_log_warn, vha, 0x0062,
+ "Wrong product ID = 0x%x,0x%x,0x%x.\n",
+ mb[1], mb[2], mb[3]);
goto chip_diag_failed;
}
@@ -1178,8 +1174,7 @@
if (IS_QLA2200(ha) &&
RD_MAILBOX_REG(ha, reg, 7) == QLA2200A_RISC_ROM_VER) {
/* Limit firmware transfer size with a 2200A */
- DEBUG3(printk("scsi(%ld): Found QLA2200A chip.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x007e, "Found QLA2200A Chip.\n");
ha->device_type |= DT_ISP2200A;
ha->fw_transfer_size = 128;
@@ -1188,24 +1183,20 @@
/* Wrap Incoming Mailboxes Test. */
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- DEBUG3(printk("scsi(%ld): Checking mailboxes.\n", vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x007f, "Checking mailboxes.\n");
rval = qla2x00_mbx_reg_test(vha);
- if (rval) {
- DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
- vha->host_no));
- qla_printk(KERN_WARNING, ha,
- "Failed mailbox send register test\n");
- }
- else {
+ if (rval)
+ ql_log(ql_log_warn, vha, 0x0080,
+ "Failed mailbox send register test.\n");
+ else
/* Flag a successful rval */
rval = QLA_SUCCESS;
- }
spin_lock_irqsave(&ha->hardware_lock, flags);
chip_diag_failed:
if (rval)
- DEBUG2_3(printk("scsi(%ld): Chip diagnostics **** FAILED "
- "****\n", vha->host_no));
+ ql_log(ql_log_info, vha, 0x0081,
+ "Chip diagnostics **** FAILED ****.\n");
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -1232,10 +1223,8 @@
rval = qla2x00_mbx_reg_test(vha);
if (rval) {
- DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
- vha->host_no));
- qla_printk(KERN_WARNING, ha,
- "Failed mailbox send register test\n");
+ ql_log(ql_log_warn, vha, 0x0082,
+ "Failed mailbox send register test.\n");
} else {
/* Flag a successful rval */
rval = QLA_SUCCESS;
@@ -1257,8 +1246,8 @@
struct rsp_que *rsp = ha->rsp_q_map[0];
if (ha->fw_dump) {
- qla_printk(KERN_WARNING, ha,
- "Firmware dump previously allocated.\n");
+ ql_dbg(ql_dbg_init, vha, 0x00bd,
+ "Firmware dump already allocated.\n");
return;
}
@@ -1288,8 +1277,9 @@
tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
GFP_KERNEL);
if (!tc) {
- qla_printk(KERN_WARNING, ha, "Unable to allocate "
- "(%d KB) for FCE.\n", FCE_SIZE / 1024);
+ ql_log(ql_log_warn, vha, 0x00be,
+ "Unable to allocate (%d KB) for FCE.\n",
+ FCE_SIZE / 1024);
goto try_eft;
}
@@ -1297,16 +1287,15 @@
rval = qla2x00_enable_fce_trace(vha, tc_dma, FCE_NUM_BUFFERS,
ha->fce_mb, &ha->fce_bufs);
if (rval) {
- qla_printk(KERN_WARNING, ha, "Unable to initialize "
- "FCE (%d).\n", rval);
+ ql_log(ql_log_warn, vha, 0x00bf,
+ "Unable to initialize FCE (%d).\n", rval);
dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
tc_dma);
ha->flags.fce_enabled = 0;
goto try_eft;
}
-
- qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
- FCE_SIZE / 1024);
+ ql_log(ql_log_info, vha, 0x00c0,
+ "Allocate (%d KB) for FCE...\n", FCE_SIZE / 1024);
fce_size = sizeof(struct qla2xxx_fce_chain) + FCE_SIZE;
ha->flags.fce_enabled = 1;
@@ -1317,23 +1306,23 @@
tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
GFP_KERNEL);
if (!tc) {
- qla_printk(KERN_WARNING, ha, "Unable to allocate "
- "(%d KB) for EFT.\n", EFT_SIZE / 1024);
+ ql_log(ql_log_warn, vha, 0x00c1,
+ "Unable to allocate (%d KB) for EFT.\n",
+ EFT_SIZE / 1024);
goto cont_alloc;
}
memset(tc, 0, EFT_SIZE);
rval = qla2x00_enable_eft_trace(vha, tc_dma, EFT_NUM_BUFFERS);
if (rval) {
- qla_printk(KERN_WARNING, ha, "Unable to initialize "
- "EFT (%d).\n", rval);
+ ql_log(ql_log_warn, vha, 0x00c2,
+ "Unable to initialize EFT (%d).\n", rval);
dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
tc_dma);
goto cont_alloc;
}
-
- qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
- EFT_SIZE / 1024);
+ ql_log(ql_log_info, vha, 0x00c3,
+ "Allocated (%d KB) EFT ...\n", EFT_SIZE / 1024);
eft_size = EFT_SIZE;
ha->eft_dma = tc_dma;
@@ -1350,8 +1339,9 @@
ha->fw_dump = vmalloc(dump_size);
if (!ha->fw_dump) {
- qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
- "firmware dump!!!\n", dump_size / 1024);
+ ql_log(ql_log_warn, vha, 0x00c4,
+ "Unable to allocate (%d KB) for firmware dump.\n",
+ dump_size / 1024);
if (ha->fce) {
dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
@@ -1368,8 +1358,8 @@
}
return;
}
- qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware dump...\n",
- dump_size / 1024);
+ ql_log(ql_log_info, vha, 0x00c5,
+ "Allocated (%d KB) for firmware dump.\n", dump_size / 1024);
ha->fw_dump_len = dump_size;
ha->fw_dump->signature[0] = 'Q';
@@ -1398,23 +1388,21 @@
int rval;
uint16_t dc;
uint32_t dw;
- struct qla_hw_data *ha = vha->hw;
if (!IS_QLA81XX(vha->hw))
return QLA_SUCCESS;
rval = qla2x00_write_ram_word(vha, 0x7c00, 1);
if (rval != QLA_SUCCESS) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "Sync-MPI: Unable to acquire semaphore.\n"));
+ ql_log(ql_log_warn, vha, 0x0105,
+ "Unable to acquire semaphore.\n");
goto done;
}
pci_read_config_word(vha->hw->pdev, 0x54, &dc);
rval = qla2x00_read_ram_word(vha, 0x7a15, &dw);
if (rval != QLA_SUCCESS) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "Sync-MPI: Unable to read sync.\n"));
+ ql_log(ql_log_warn, vha, 0x0067, "Unable to read sync.\n");
goto done_release;
}
@@ -1426,15 +1414,14 @@
dw |= dc;
rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
if (rval != QLA_SUCCESS) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "Sync-MPI: Unable to gain sync.\n"));
+ ql_log(ql_log_warn, vha, 0x0114, "Unable to gain sync.\n");
}
done_release:
rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
if (rval != QLA_SUCCESS) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "Sync-MPI: Unable to release semaphore.\n"));
+ ql_log(ql_log_warn, vha, 0x006d,
+ "Unable to release semaphore.\n");
}
done:
@@ -1479,14 +1466,14 @@
/* Load firmware sequences */
rval = ha->isp_ops->load_risc(vha, &srisc_address);
if (rval == QLA_SUCCESS) {
- DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
- "code.\n", vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x00c9,
+ "Verifying Checksum of loaded RISC code.\n");
rval = qla2x00_verify_checksum(vha, srisc_address);
if (rval == QLA_SUCCESS) {
/* Start firmware execution. */
- DEBUG(printk("scsi(%ld): Checksum OK, start "
- "firmware.\n", vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x00ca,
+ "Starting firmware.\n");
rval = qla2x00_execute_fw(vha, srisc_address);
/* Retrieve firmware information. */
@@ -1522,9 +1509,9 @@
}
}
} else {
- DEBUG2(printk(KERN_INFO
- "scsi(%ld): ISP Firmware failed checksum.\n",
- vha->host_no));
+ ql_log(ql_log_fatal, vha, 0x00cd,
+ "ISP Firmware failed checksum.\n");
+ goto failed;
}
}
@@ -1549,7 +1536,7 @@
ha->flags.fac_supported = 1;
ha->fdt_block_size = size << 2;
} else {
- qla_printk(KERN_ERR, ha,
+ ql_log(ql_log_warn, vha, 0x00ce,
"Unsupported FAC firmware (%d.%02d.%02d).\n",
ha->fw_major_version, ha->fw_minor_version,
ha->fw_subminor_version);
@@ -1557,8 +1544,8 @@
}
failed:
if (rval) {
- DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
- vha->host_no));
+ ql_log(ql_log_fatal, vha, 0x00cf,
+ "Setup chip ****FAILED****.\n");
}
return (rval);
@@ -1608,10 +1595,11 @@
return;
/* Serial Link options. */
- DEBUG3(printk("scsi(%ld): Serial link options:\n",
- vha->host_no));
- DEBUG3(qla2x00_dump_buffer((uint8_t *)&ha->fw_seriallink_options,
- sizeof(ha->fw_seriallink_options)));
+ ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0115,
+ "Serial link options.\n");
+ ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0109,
+ (uint8_t *)&ha->fw_seriallink_options,
+ sizeof(ha->fw_seriallink_options));
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
if (ha->fw_seriallink_options[3] & BIT_2) {
@@ -1688,7 +1676,7 @@
le16_to_cpu(ha->fw_seriallink_options24[2]),
le16_to_cpu(ha->fw_seriallink_options24[3]));
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x0104,
"Unable to update Serial Link options (%x).\n", rval);
}
}
@@ -1746,8 +1734,9 @@
icb->rid = __constant_cpu_to_le16(rid);
if (ha->flags.msix_enabled) {
msix = &ha->msix_entries[1];
- DEBUG2_17(printk(KERN_INFO
- "Registering vector 0x%x for base que\n", msix->entry));
+ ql_dbg(ql_dbg_init, vha, 0x00fd,
+ "Registering vector 0x%x for base que.\n",
+ msix->entry);
icb->msix = cpu_to_le16(msix->entry);
}
/* Use alternate PCI bus number */
@@ -1764,8 +1753,8 @@
icb->firmware_options_2 &=
__constant_cpu_to_le32(~BIT_22);
ha->flags.disable_msix_handshake = 1;
- qla_printk(KERN_INFO, ha,
- "MSIX Handshake Disable Mode turned on\n");
+ ql_dbg(ql_dbg_init, vha, 0x00fe,
+ "MSIX Handshake Disable Mode turned on.\n");
} else {
icb->firmware_options_2 |=
__constant_cpu_to_le32(BIT_22);
@@ -1850,7 +1839,7 @@
/* Update any ISP specific firmware options before initialization. */
ha->isp_ops->update_fw_options(vha);
- DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x00d1, "Issue init firmware.\n");
if (ha->flags.npiv_supported) {
if (ha->operating_mode == LOOP)
@@ -1866,11 +1855,11 @@
rval = qla2x00_init_firmware(vha, ha->init_cb_size);
if (rval) {
- DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n",
- vha->host_no));
+ ql_log(ql_log_fatal, vha, 0x00d2,
+ "Init Firmware **** FAILED ****.\n");
} else {
- DEBUG3(printk("scsi(%ld): Init firmware -- success.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_init, vha, 0x00d3,
+ "Init Firmware -- success.\n");
}
return (rval);
@@ -1913,10 +1902,8 @@
/* Wait for ISP to finish LIP */
if (!vha->flags.init_done)
- qla_printk(KERN_INFO, ha, "Waiting for LIP to complete...\n");
-
- DEBUG3(printk("scsi(%ld): Waiting for LIP to complete...\n",
- vha->host_no));
+ ql_log(ql_log_info, vha, 0x801e,
+ "Waiting for LIP to complete.\n");
do {
rval = qla2x00_get_firmware_state(vha, state);
@@ -1925,30 +1912,35 @@
vha->device_flags &= ~DFLG_NO_CABLE;
}
if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) {
- DEBUG16(printk("scsi(%ld): fw_state=%x "
- "84xx=%x.\n", vha->host_no, state[0],
- state[2]));
+ ql_dbg(ql_dbg_taskm, vha, 0x801f,
+ "fw_state=%x 84xx=%x.\n", state[0],
+ state[2]);
if ((state[2] & FSTATE_LOGGED_IN) &&
(state[2] & FSTATE_WAITING_FOR_VERIFY)) {
- DEBUG16(printk("scsi(%ld): Sending "
- "verify iocb.\n", vha->host_no));
+ ql_dbg(ql_dbg_taskm, vha, 0x8028,
+ "Sending verify iocb.\n");
cs84xx_time = jiffies;
rval = qla84xx_init_chip(vha);
- if (rval != QLA_SUCCESS)
+ if (rval != QLA_SUCCESS) {
+ ql_log(ql_log_warn,
+ vha, 0x8043,
+ "Init chip failed.\n");
break;
+ }
/* Add time taken to initialize. */
cs84xx_time = jiffies - cs84xx_time;
wtime += cs84xx_time;
mtime += cs84xx_time;
- DEBUG16(printk("scsi(%ld): Increasing "
- "wait time by %ld. New time %ld\n",
- vha->host_no, cs84xx_time, wtime));
+ ql_dbg(ql_dbg_taskm, vha, 0x8042,
+ "Increasing wait time by %ld. "
+ "New time %ld.\n", cs84xx_time,
+ wtime);
}
} else if (state[0] == FSTATE_READY) {
- DEBUG(printk("scsi(%ld): F/W Ready - OK \n",
- vha->host_no));
+ ql_dbg(ql_dbg_taskm, vha, 0x8037,
+ "F/W Ready - OK.\n");
qla2x00_get_retry_cnt(vha, &ha->retry_count,
&ha->login_timeout, &ha->r_a_tov);
@@ -1965,7 +1957,7 @@
* other than Wait for Login.
*/
if (time_after_eq(jiffies, mtime)) {
- qla_printk(KERN_INFO, ha,
+ ql_log(ql_log_info, vha, 0x8038,
"Cable is unplugged...\n");
vha->device_flags |= DFLG_NO_CABLE;
@@ -1985,17 +1977,17 @@
/* Delay for a while */
msleep(500);
- DEBUG3(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
- vha->host_no, state[0], jiffies));
+ ql_dbg(ql_dbg_taskm, vha, 0x8039,
+ "fw_state=%x curr time=%lx.\n", state[0], jiffies);
} while (1);
- DEBUG(printk("scsi(%ld): fw_state=%x (%x, %x, %x, %x) curr time=%lx.\n",
- vha->host_no, state[0], state[1], state[2], state[3], state[4],
- jiffies));
+ ql_dbg(ql_dbg_taskm, vha, 0x803a,
+ "fw_state=%x (%x, %x, %x, %x) " "curr time=%lx.\n", state[0],
+ state[1], state[2], state[3], state[4], jiffies);
if (rval) {
- DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
- vha->host_no));
+ ql_log(ql_log_warn, vha, 0x803b,
+ "Firmware ready **** FAILED ****.\n");
}
return (rval);
@@ -2034,19 +2026,19 @@
if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) ||
IS_QLA8XXX_TYPE(ha) ||
(rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
- DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
- __func__, vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2008,
+ "Loop is in a transition state.\n");
} else {
- qla_printk(KERN_WARNING, ha,
- "ERROR -- Unable to get host loop ID.\n");
+ ql_log(ql_log_warn, vha, 0x2009,
+ "Unable to get host loop ID.\n");
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
return (rval);
}
if (topo == 4) {
- qla_printk(KERN_INFO, ha,
- "Cannot get topology - retrying.\n");
+ ql_log(ql_log_info, vha, 0x200a,
+ "Cannot get topology - retrying.\n");
return (QLA_FUNCTION_FAILED);
}
@@ -2059,31 +2051,27 @@
switch (topo) {
case 0:
- DEBUG3(printk("scsi(%ld): HBA in NL topology.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x200b, "HBA in NL topology.\n");
ha->current_topology = ISP_CFG_NL;
strcpy(connect_type, "(Loop)");
break;
case 1:
- DEBUG3(printk("scsi(%ld): HBA in FL topology.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x200c, "HBA in FL topology.\n");
ha->switch_cap = sw_cap;
ha->current_topology = ISP_CFG_FL;
strcpy(connect_type, "(FL_Port)");
break;
case 2:
- DEBUG3(printk("scsi(%ld): HBA in N P2P topology.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x200d, "HBA in N P2P topology.\n");
ha->operating_mode = P2P;
ha->current_topology = ISP_CFG_N;
strcpy(connect_type, "(N_Port-to-N_Port)");
break;
case 3:
- DEBUG3(printk("scsi(%ld): HBA in F P2P topology.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x200e, "HBA in F P2P topology.\n");
ha->switch_cap = sw_cap;
ha->operating_mode = P2P;
ha->current_topology = ISP_CFG_F;
@@ -2091,9 +2079,8 @@
break;
default:
- DEBUG3(printk("scsi(%ld): HBA in unknown topology %x. "
- "Using NL.\n",
- vha->host_no, topo));
+ ql_dbg(ql_dbg_disc, vha, 0x200f,
+ "HBA in unknown topology %x, using NL.\n", topo);
ha->current_topology = ISP_CFG_NL;
strcpy(connect_type, "(Loop)");
break;
@@ -2106,14 +2093,16 @@
vha->d_id.b.al_pa = al_pa;
if (!vha->flags.init_done)
- qla_printk(KERN_INFO, ha,
- "Topology - %s, Host Loop address 0x%x\n",
+ ql_log(ql_log_info, vha, 0x2010,
+ "Topology - %s, Host Loop address 0x%x.\n",
connect_type, vha->loop_id);
if (rval) {
- DEBUG2_3(printk("scsi(%ld): FAILED.\n", vha->host_no));
+ ql_log(ql_log_warn, vha, 0x2011,
+ "%s FAILED\n", __func__);
} else {
- DEBUG3(printk("scsi(%ld): exiting normally.\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2012,
+ "%s success\n", __func__);
}
return(rval);
@@ -2227,18 +2216,22 @@
for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
chksum += *ptr++;
- DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
- DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
+ ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010f,
+ "Contents of NVRAM.\n");
+ ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0110,
+ (uint8_t *)nv, ha->nvram_size);
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
nv->id[2] != 'P' || nv->id[3] != ' ' || nv->nvram_version < 1) {
/* Reset NVRAM data. */
- qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
- "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
- nv->nvram_version);
- qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
- "invalid -- WWPN) defaults.\n");
+ ql_log(ql_log_warn, vha, 0x0064,
+ "Inconisistent NVRAM "
+ "detected: checksum=0x%x id=%c version=0x%x.\n",
+ chksum, nv->id[0], nv->nvram_version);
+ ql_log(ql_log_warn, vha, 0x0065,
+ "Falling back to "
+ "functioning (yet invalid -- WWPN) defaults.\n");
/*
* Set default initialization control block.
@@ -2493,10 +2486,7 @@
if (ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = QLA_ZIO_MODE_6;
- DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer "
- "delay (%d us).\n", vha->host_no, ha->zio_mode,
- ha->zio_timer * 100));
- qla_printk(KERN_INFO, ha,
+ ql_log(ql_log_info, vha, 0x0068,
"ZIO mode %d enabled; timer delay (%d us).\n",
ha->zio_mode, ha->zio_timer * 100);
@@ -2507,8 +2497,8 @@
}
if (rval) {
- DEBUG2_3(printk(KERN_WARNING
- "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
+ ql_log(ql_log_warn, vha, 0x0069,
+ "NVRAM configuration failed.\n");
}
return (rval);
}
@@ -2579,15 +2569,15 @@
if (test_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags)) {
rval = qla2x00_configure_hba(vha);
if (rval != QLA_SUCCESS) {
- DEBUG(printk("scsi(%ld): Unable to configure HBA.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2013,
+ "Unable to configure HBA.\n");
return (rval);
}
}
save_flags = flags = vha->dpc_flags;
- DEBUG(printk("scsi(%ld): Configure loop -- dpc flags =0x%lx\n",
- vha->host_no, flags));
+ ql_dbg(ql_dbg_disc, vha, 0x2014,
+ "Configure loop -- dpc flags = 0x%lx.\n", flags);
/*
* If we have both an RSCN and PORT UPDATE pending then handle them
@@ -2624,15 +2614,21 @@
}
if (test_bit(LOCAL_LOOP_UPDATE, &flags)) {
- if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
+ if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
+ ql_dbg(ql_dbg_disc, vha, 0x2015,
+ "Loop resync needed, failing.\n");
rval = QLA_FUNCTION_FAILED;
+ }
else
rval = qla2x00_configure_local_loop(vha);
}
if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
- if (LOOP_TRANSITION(vha))
+ if (LOOP_TRANSITION(vha)) {
+ ql_dbg(ql_dbg_disc, vha, 0x201e,
+ "Needs RSCN update and loop transition.\n");
rval = QLA_FUNCTION_FAILED;
+ }
else
rval = qla2x00_configure_fabric(vha);
}
@@ -2643,16 +2639,17 @@
rval = QLA_FUNCTION_FAILED;
} else {
atomic_set(&vha->loop_state, LOOP_READY);
-
- DEBUG(printk("scsi(%ld): LOOP READY\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2069,
+ "LOOP READY.\n");
}
}
if (rval) {
- DEBUG2_3(printk("%s(%ld): *** FAILED ***\n",
- __func__, vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x206a,
+ "%s *** FAILED ***.\n", __func__);
} else {
- DEBUG3(printk("%s: exiting normally\n", __func__));
+ ql_dbg(ql_dbg_disc, vha, 0x206b,
+ "%s: exiting normally.\n", __func__);
}
/* Restore state if a resync event occurred during processing */
@@ -2700,8 +2697,10 @@
new_fcport = NULL;
entries = MAX_FIBRE_DEVICES;
- DEBUG3(printk("scsi(%ld): Getting FCAL position map\n", vha->host_no));
- DEBUG3(qla2x00_get_fcal_position_map(vha, NULL));
+ ql_dbg(ql_dbg_disc, vha, 0x2016,
+ "Getting FCAL position map.\n");
+ if (ql2xextended_error_logging & ql_dbg_disc)
+ qla2x00_get_fcal_position_map(vha, NULL);
/* Get list of logged in devices. */
memset(ha->gid_list, 0, GID_LIST_SIZE);
@@ -2710,14 +2709,17 @@
if (rval != QLA_SUCCESS)
goto cleanup_allocation;
- DEBUG3(printk("scsi(%ld): Entries in ID list (%d)\n",
- vha->host_no, entries));
- DEBUG3(qla2x00_dump_buffer((uint8_t *)ha->gid_list,
- entries * sizeof(struct gid_list_info)));
+ ql_dbg(ql_dbg_disc, vha, 0x2017,
+ "Entries in ID list (%d).\n", entries);
+ ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x2075,
+ (uint8_t *)ha->gid_list,
+ entries * sizeof(struct gid_list_info));
/* Allocate temporary fcport for any new fcports discovered. */
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
+ ql_log(ql_log_warn, vha, 0x2018,
+ "Memory allocation failed for fcport.\n");
rval = QLA_MEMORY_ALLOC_FAILED;
goto cleanup_allocation;
}
@@ -2731,9 +2733,9 @@
fcport->port_type != FCT_BROADCAST &&
(fcport->flags & FCF_FABRIC_DEVICE) == 0) {
- DEBUG(printk("scsi(%ld): Marking port lost, "
- "loop_id=0x%04x\n",
- vha->host_no, fcport->loop_id));
+ ql_dbg(ql_dbg_disc, vha, 0x2019,
+ "Marking port lost loop_id=0x%04x.\n",
+ fcport->loop_id);
qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
}
@@ -2774,12 +2776,12 @@
new_fcport->vp_idx = vha->vp_idx;
rval2 = qla2x00_get_port_database(vha, new_fcport, 0);
if (rval2 != QLA_SUCCESS) {
- DEBUG2(printk("scsi(%ld): Failed to retrieve fcport "
- "information -- get_port_database=%x, "
- "loop_id=0x%04x\n",
- vha->host_no, rval2, new_fcport->loop_id));
- DEBUG2(printk("scsi(%ld): Scheduling resync...\n",
- vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x201a,
+ "Failed to retrieve fcport information "
+ "-- get_port_database=%x, loop_id=0x%04x.\n",
+ rval2, new_fcport->loop_id);
+ ql_dbg(ql_dbg_disc, vha, 0x201b,
+ "Scheduling resync.\n");
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
continue;
}
@@ -2815,6 +2817,8 @@
fcport = new_fcport;
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
+ ql_log(ql_log_warn, vha, 0x201c,
+ "Failed to allocate memory for fcport.\n");
rval = QLA_MEMORY_ALLOC_FAILED;
goto cleanup_allocation;
}
@@ -2833,8 +2837,8 @@
kfree(new_fcport);
if (rval != QLA_SUCCESS) {
- DEBUG2(printk("scsi(%ld): Configure local loop error exit: "
- "rval=%x\n", vha->host_no, rval));
+ ql_dbg(ql_dbg_disc, vha, 0x201d,
+ "Configure local loop error exit: rval=%x.\n", rval);
}
return (rval);
@@ -2863,27 +2867,27 @@
rval = qla2x00_set_idma_speed(vha, fcport->loop_id, fcport->fp_speed,
mb);
if (rval != QLA_SUCCESS) {
- DEBUG2(printk("scsi(%ld): Unable to adjust iIDMA "
- "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n",
- vha->host_no, fcport->port_name[0], fcport->port_name[1],
+ ql_dbg(ql_dbg_disc, vha, 0x2004,
+ "Unable to adjust iIDMA "
+ "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x "
+ "%04x.\n", fcport->port_name[0], fcport->port_name[1],
fcport->port_name[2], fcport->port_name[3],
fcport->port_name[4], fcport->port_name[5],
fcport->port_name[6], fcport->port_name[7], rval,
- fcport->fp_speed, mb[0], mb[1]));
+ fcport->fp_speed, mb[0], mb[1]);
} else {
link_speed = link_speeds[LS_UNKNOWN];
if (fcport->fp_speed < 5)
link_speed = link_speeds[fcport->fp_speed];
else if (fcport->fp_speed == 0x13)
link_speed = link_speeds[5];
- DEBUG2(qla_printk(KERN_INFO, ha,
- "iIDMA adjusted to %s GB/s on "
- "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
- link_speed, fcport->port_name[0],
- fcport->port_name[1], fcport->port_name[2],
- fcport->port_name[3], fcport->port_name[4],
- fcport->port_name[5], fcport->port_name[6],
- fcport->port_name[7]));
+ ql_dbg(ql_dbg_disc, vha, 0x2005,
+ "iIDMA adjusted to %s GB/s "
+ "on %02x%02x%02x%02x%02x%02x%02x%02x.\n", link_speed,
+ fcport->port_name[0], fcport->port_name[1],
+ fcport->port_name[2], fcport->port_name[3],
+ fcport->port_name[4], fcport->port_name[5],
+ fcport->port_name[6], fcport->port_name[7]);
}
}
@@ -2892,7 +2896,6 @@
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
- struct qla_hw_data *ha = vha->hw;
unsigned long flags;
qla2x00_rport_del(fcport);
@@ -2904,8 +2907,8 @@
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
fcport->rport = rport = fc_remote_port_add(vha->host, 0, &rport_ids);
if (!rport) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate fc remote port!\n");
+ ql_log(ql_log_warn, vha, 0x2006,
+ "Unable to allocate fc remote port.\n");
return;
}
spin_lock_irqsave(fcport->vha->host->host_lock, flags);
@@ -2980,8 +2983,8 @@
loop_id = SNS_FL_PORT;
rval = qla2x00_get_port_name(vha, loop_id, vha->fabric_node_name, 1);
if (rval != QLA_SUCCESS) {
- DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL "
- "Port\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x201f,
+ "MBX_GET_PORT_NAME failed, No FL Port.\n");
vha->device_flags &= ~SWITCH_FOUND;
return (QLA_SUCCESS);
@@ -3008,32 +3011,32 @@
ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff,
0xfc, mb, BIT_1 | BIT_0);
if (mb[0] != MBS_COMMAND_COMPLETE) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
- "mb[2]=%x mb[6]=%x mb[7]=%x\n", loop_id,
- mb[0], mb[1], mb[2], mb[6], mb[7]));
+ ql_dbg(ql_dbg_disc, vha, 0x2042,
+ "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x "
+ "mb[6]=%x mb[7]=%x.\n", loop_id, mb[0], mb[1],
+ mb[2], mb[6], mb[7]);
return (QLA_SUCCESS);
}
if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) {
if (qla2x00_rft_id(vha)) {
/* EMPTY */
- DEBUG2(printk("scsi(%ld): Register FC-4 "
- "TYPE failed.\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2045,
+ "Register FC-4 TYPE failed.\n");
}
if (qla2x00_rff_id(vha)) {
/* EMPTY */
- DEBUG2(printk("scsi(%ld): Register FC-4 "
- "Features failed.\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2049,
+ "Register FC-4 Features failed.\n");
}
if (qla2x00_rnn_id(vha)) {
/* EMPTY */
- DEBUG2(printk("scsi(%ld): Register Node Name "
- "failed.\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x204f,
+ "Register Node Name failed.\n");
} else if (qla2x00_rsnn_nn(vha)) {
/* EMPTY */
- DEBUG2(printk("scsi(%ld): Register Symbolic "
- "Node Name failed.\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2053,
+ "Register Symobilic Node Name failed.\n");
}
}
@@ -3137,8 +3140,8 @@
}
if (rval) {
- DEBUG2(printk("scsi(%ld): Configure fabric error exit: "
- "rval=%d\n", vha->host_no, rval));
+ ql_dbg(ql_dbg_disc, vha, 0x2068,
+ "Configure fabric error exit rval=%d.\n", rval);
}
return (rval);
@@ -3180,8 +3183,8 @@
swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_KERNEL);
if (!swl) {
/*EMPTY*/
- DEBUG2(printk("scsi(%ld): GID_PT allocations failed, fallback "
- "on GA_NXT\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2054,
+ "GID_PT allocations failed, fallback on GA_NXT.\n");
} else {
if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) {
kfree(swl);
@@ -3206,6 +3209,8 @@
/* Allocate temporary fcport for any new fcports discovered. */
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
+ ql_log(ql_log_warn, vha, 0x205e,
+ "Failed to allocate memory for fcport.\n");
kfree(swl);
return (QLA_MEMORY_ALLOC_FAILED);
}
@@ -3252,9 +3257,9 @@
/* Send GA_NXT to the switch */
rval = qla2x00_ga_nxt(vha, new_fcport);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "SNS scan failed -- assuming zero-entry "
- "result...\n");
+ ql_log(ql_log_warn, vha, 0x2064,
+ "SNS scan failed -- assuming "
+ "zero-entry result.\n");
list_for_each_entry_safe(fcport, fcptemp,
new_fcports, list) {
list_del(&fcport->list);
@@ -3270,9 +3275,11 @@
wrap.b24 = new_fcport->d_id.b24;
first_dev = 0;
} else if (new_fcport->d_id.b24 == wrap.b24) {
- DEBUG2(printk("scsi(%ld): device wrap (%02x%02x%02x)\n",
- vha->host_no, new_fcport->d_id.b.domain,
- new_fcport->d_id.b.area, new_fcport->d_id.b.al_pa));
+ ql_dbg(ql_dbg_disc, vha, 0x2065,
+ "Device wrap (%02x%02x%02x).\n",
+ new_fcport->d_id.b.domain,
+ new_fcport->d_id.b.area,
+ new_fcport->d_id.b.al_pa);
break;
}
@@ -3377,6 +3384,8 @@
nxt_d_id.b24 = new_fcport->d_id.b24;
new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (new_fcport == NULL) {
+ ql_log(ql_log_warn, vha, 0x2066,
+ "Memory allocation failed for fcport.\n");
kfree(swl);
return (QLA_MEMORY_ALLOC_FAILED);
}
@@ -3506,10 +3515,10 @@
d_id.b.area = MSB(LSW(rscn_entry));
d_id.b.al_pa = LSB(LSW(rscn_entry));
- DEBUG(printk("scsi(%ld): RSCN queue entry[%d] = "
- "[%02x/%02x%02x%02x].\n",
- vha->host_no, vha->rscn_out_ptr, format, d_id.b.domain,
- d_id.b.area, d_id.b.al_pa));
+ ql_dbg(ql_dbg_disc, vha, 0x2020,
+ "RSCN queue entry[%d] = [%02x/%02x%02x%02x].\n",
+ vha->rscn_out_ptr, format, d_id.b.domain, d_id.b.area,
+ d_id.b.al_pa);
vha->rscn_out_ptr++;
if (vha->rscn_out_ptr == MAX_RSCN_COUNT)
@@ -3525,17 +3534,17 @@
if (rscn_entry != vha->rscn_queue[rscn_out_iter])
break;
- DEBUG(printk("scsi(%ld): Skipping duplicate RSCN queue "
- "entry found at [%d].\n", vha->host_no,
- rscn_out_iter));
+ ql_dbg(ql_dbg_disc, vha, 0x2021,
+ "Skipping duplicate RSCN queue entry found at "
+ "[%d].\n", rscn_out_iter);
vha->rscn_out_ptr = rscn_out_iter;
}
/* Queue overflow, set switch default case. */
if (vha->flags.rscn_queue_overflow) {
- DEBUG(printk("scsi(%ld): device_resync: rscn "
- "overflow.\n", vha->host_no));
+ ql_dbg(ql_dbg_disc, vha, 0x2022,
+ "device_resync: rscn overflow.\n");
format = 3;
vha->flags.rscn_queue_overflow = 0;
@@ -3664,10 +3673,11 @@
tmp_loopid = 0;
for (;;) {
- DEBUG(printk("scsi(%ld): Trying Fabric Login w/loop id 0x%04x "
- "for port %02x%02x%02x.\n",
- vha->host_no, fcport->loop_id, fcport->d_id.b.domain,
- fcport->d_id.b.area, fcport->d_id.b.al_pa));
+ ql_dbg(ql_dbg_disc, vha, 0x2000,
+ "Trying Fabric Login w/loop id 0x%04x for port "
+ "%02x%02x%02x.\n",
+ fcport->loop_id, fcport->d_id.b.domain,
+ fcport->d_id.b.area, fcport->d_id.b.al_pa);
/* Login fcport on switch. */
ha->isp_ops->fabric_login(vha, fcport->loop_id,
@@ -3685,10 +3695,11 @@
tmp_loopid = fcport->loop_id;
fcport->loop_id = mb[1];
- DEBUG(printk("Fabric Login: port in use - next "
- "loop id=0x%04x, port Id=%02x%02x%02x.\n",
+ ql_dbg(ql_dbg_disc, vha, 0x2001,
+ "Fabric Login: port in use - next loop "
+ "id=0x%04x, port id= %02x%02x%02x.\n",
fcport->loop_id, fcport->d_id.b.domain,
- fcport->d_id.b.area, fcport->d_id.b.al_pa));
+ fcport->d_id.b.area, fcport->d_id.b.al_pa);
} else if (mb[0] == MBS_COMMAND_COMPLETE) {
/*
@@ -3749,11 +3760,11 @@
/*
* unrecoverable / not handled error
*/
- DEBUG2(printk("%s(%ld): failed=%x port_id=%02x%02x%02x "
- "loop_id=%x jiffies=%lx.\n",
- __func__, vha->host_no, mb[0],
- fcport->d_id.b.domain, fcport->d_id.b.area,
- fcport->d_id.b.al_pa, fcport->loop_id, jiffies));
+ ql_dbg(ql_dbg_disc, vha, 0x2002,
+ "Failed=%x port_id=%02x%02x%02x loop_id=%x "
+ "jiffies=%lx.\n", mb[0], fcport->d_id.b.domain,
+ fcport->d_id.b.area, fcport->d_id.b.al_pa,
+ fcport->loop_id, jiffies);
*next_loopid = fcport->loop_id;
ha->isp_ops->fabric_logout(vha, fcport->loop_id,
@@ -3857,7 +3868,8 @@
return (QLA_FUNCTION_FAILED);
if (rval)
- DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
+ ql_dbg(ql_dbg_disc, vha, 0x206c,
+ "%s *** FAILED ***.\n", __func__);
return (rval);
}
@@ -3934,8 +3946,8 @@
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
- qla_printk(KERN_INFO, ha,
- "Performing ISP error recovery - ha= %p.\n", ha);
+ ql_dbg(ql_dbg_p3p, vha, 0xb002,
+ "Performing ISP error recovery - ha=%p.\n", ha);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
@@ -3969,8 +3981,8 @@
clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
ha->qla_stats.total_isp_aborts++;
- qla_printk(KERN_INFO, ha,
- "Performing ISP error recovery - ha= %p.\n", ha);
+ ql_log(ql_log_info, vha, 0x00af,
+ "Performing ISP error recovery - ha=%p.\n", ha);
/* For ISP82XX, reset_chip is just disabling interrupts.
* Driver waits for the completion of the commands.
@@ -4021,6 +4033,8 @@
/* Make sure for ISP 82XX IO DMA is complete */
if (IS_QLA82XX(ha)) {
qla82xx_chip_reset_cleanup(vha);
+ ql_log(ql_log_info, vha, 0x00b4,
+ "Done chip reset cleanup.\n");
/* Done waiting for pending commands.
* Reset the online flag.
@@ -4102,7 +4116,7 @@
ha->fce_dma, ha->fce_bufs, ha->fce_mb,
&ha->fce_bufs);
if (rval) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x8033,
"Unable to reinitialize FCE "
"(%d).\n", rval);
ha->flags.fce_enabled = 0;
@@ -4114,7 +4128,7 @@
rval = qla2x00_enable_eft_trace(vha,
ha->eft_dma, EFT_NUM_BUFFERS);
if (rval) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x8034,
"Unable to reinitialize EFT "
"(%d).\n", rval);
}
@@ -4123,9 +4137,9 @@
vha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
if (ha->isp_abort_cnt == 0) {
- qla_printk(KERN_WARNING, ha,
- "ISP error recovery failed - "
- "board disabled\n");
+ ql_log(ql_log_fatal, vha, 0x8035,
+ "ISP error recover failed - "
+ "board disabled.\n");
/*
* The next call disables the board
* completely.
@@ -4137,16 +4151,16 @@
status = 0;
} else { /* schedule another ISP abort */
ha->isp_abort_cnt--;
- DEBUG(printk("qla%ld: ISP abort - "
- "retry remaining %d\n",
- vha->host_no, ha->isp_abort_cnt));
+ ql_dbg(ql_dbg_taskm, vha, 0x8020,
+ "ISP abort - retry remaining %d.\n",
+ ha->isp_abort_cnt);
status = 1;
}
} else {
ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
- DEBUG(printk("qla2x00(%ld): ISP error recovery "
- "- retrying (%d) more times\n",
- vha->host_no, ha->isp_abort_cnt));
+ ql_dbg(ql_dbg_taskm, vha, 0x8021,
+ "ISP error recovery - retrying (%d) "
+ "more times.\n", ha->isp_abort_cnt);
set_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
status = 1;
}
@@ -4155,9 +4169,7 @@
}
if (!status) {
- DEBUG(printk(KERN_INFO
- "qla2x00_abort_isp(%ld): succeeded.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_taskm, vha, 0x8022, "%s succeeded.\n", __func__);
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
@@ -4174,8 +4186,7 @@
spin_unlock_irqrestore(&ha->vport_slock, flags);
} else {
- qla_printk(KERN_INFO, ha,
- "qla2x00_abort_isp: **** FAILED ****\n");
+ ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n");
}
return(status);
@@ -4216,8 +4227,8 @@
status = qla2x00_fw_ready(vha);
if (!status) {
- DEBUG(printk("%s(): Start configure loop, "
- "status = %d\n", __func__, status));
+ ql_dbg(ql_dbg_taskm, vha, 0x8031,
+ "Start configure loop status = %d.\n", status);
/* Issue a marker after FW becomes ready. */
qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
@@ -4239,9 +4250,8 @@
if ((vha->device_flags & DFLG_NO_CABLE))
status = 0;
- DEBUG(printk("%s(): Configure loop done, status = 0x%x\n",
- __func__,
- status));
+ ql_dbg(ql_dbg_taskm, vha, 0x8032,
+ "Configure loop done, status = 0x%x.\n", status);
}
return (status);
}
@@ -4261,13 +4271,13 @@
rsp->options &= ~BIT_0;
ret = qla25xx_init_rsp_que(base_vha, rsp);
if (ret != QLA_SUCCESS)
- DEBUG2_17(printk(KERN_WARNING
- "%s Rsp que:%d init failed\n", __func__,
- rsp->id));
+ ql_dbg(ql_dbg_init, base_vha, 0x00ff,
+ "%s Rsp que: %d init failed.\n",
+ __func__, rsp->id);
else
- DEBUG2_17(printk(KERN_INFO
- "%s Rsp que:%d inited\n", __func__,
- rsp->id));
+ ql_dbg(ql_dbg_init, base_vha, 0x0100,
+ "%s Rsp que: %d inited.\n",
+ __func__, rsp->id);
}
}
for (i = 1; i < ha->max_req_queues; i++) {
@@ -4277,13 +4287,13 @@
req->options &= ~BIT_0;
ret = qla25xx_init_req_que(base_vha, req);
if (ret != QLA_SUCCESS)
- DEBUG2_17(printk(KERN_WARNING
- "%s Req que:%d init failed\n", __func__,
- req->id));
+ ql_dbg(ql_dbg_init, base_vha, 0x0101,
+ "%s Req que: %d init failed.\n",
+ __func__, req->id);
else
- DEBUG2_17(printk(KERN_WARNING
- "%s Req que:%d inited\n", __func__,
- req->id));
+ ql_dbg(ql_dbg_init, base_vha, 0x0102,
+ "%s Req que: %d inited.\n",
+ __func__, req->id);
}
}
return ret;
@@ -4402,19 +4412,22 @@
for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
chksum += le32_to_cpu(*dptr++);
- DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
- DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
+ ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x006a,
+ "Contents of NVRAM\n");
+ ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010d,
+ (uint8_t *)nv, ha->nvram_size);
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
|| nv->id[3] != ' ' ||
nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
/* Reset NVRAM data. */
- qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
- "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
- le16_to_cpu(nv->nvram_version));
- qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
- "invalid -- WWPN) defaults.\n");
+ ql_log(ql_log_warn, vha, 0x006b,
+ "Inconisistent NVRAM detected: checksum=0x%x id=%c "
+ "version=0x%x.\n", chksum, nv->id[0], nv->nvram_version);
+ ql_log(ql_log_warn, vha, 0x006c,
+ "Falling back to functioning (yet invalid -- WWPN) "
+ "defaults.\n");
/*
* Set default initialization control block.
@@ -4592,10 +4605,7 @@
if (ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = QLA_ZIO_MODE_6;
- DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
- "(%d us).\n", vha->host_no, ha->zio_mode,
- ha->zio_timer * 100));
- qla_printk(KERN_INFO, ha,
+ ql_log(ql_log_info, vha, 0x006f,
"ZIO mode %d enabled; timer delay (%d us).\n",
ha->zio_mode, ha->zio_timer * 100);
@@ -4606,8 +4616,8 @@
}
if (rval) {
- DEBUG2_3(printk(KERN_WARNING
- "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
+ ql_log(ql_log_warn, vha, 0x0070,
+ "NVRAM configuration failed.\n");
}
return (rval);
}
@@ -4625,8 +4635,8 @@
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
- qla_printk(KERN_INFO, ha,
- "FW: Loading from flash (%x)...\n", faddr);
+ ql_dbg(ql_dbg_init, vha, 0x008b,
+ "Loading firmware from flash (%x).\n", faddr);
rval = QLA_SUCCESS;
@@ -4642,11 +4652,12 @@
dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
- qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image!\n");
- qla_printk(KERN_WARNING, ha,
- "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
- dcode[1], dcode[2], dcode[3]);
+ ql_log(ql_log_fatal, vha, 0x008c,
+ "Unable to verify the integrity of flash firmware "
+ "image.\n");
+ ql_log(ql_log_fatal, vha, 0x008d,
+ "Firmware data: %08x %08x %08x %08x.\n",
+ dcode[0], dcode[1], dcode[2], dcode[3]);
return QLA_FUNCTION_FAILED;
}
@@ -4665,9 +4676,10 @@
if (dlen > risc_size)
dlen = risc_size;
- DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
- "addr %x, number of dwords 0x%x, offset 0x%x.\n",
- vha->host_no, risc_addr, dlen, faddr));
+ ql_dbg(ql_dbg_init, vha, 0x008e,
+ "Loading risc segment@ risc addr %x "
+ "number of dwords 0x%x offset 0x%x.\n",
+ risc_addr, dlen, faddr);
qla24xx_read_flash_data(vha, dcode, faddr, dlen);
for (i = 0; i < dlen; i++)
@@ -4676,12 +4688,9 @@
rval = qla2x00_load_ram(vha, req->dma, risc_addr,
dlen);
if (rval) {
- DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
- "segment %d of firmware\n", vha->host_no,
- fragment));
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to load segment %d of "
- "firmware\n", fragment);
+ ql_log(ql_log_fatal, vha, 0x008f,
+ "Failed to load segment %d of firmware.\n",
+ fragment);
break;
}
@@ -4714,9 +4723,10 @@
/* Load firmware blob. */
blob = qla2x00_request_firmware(vha);
if (!blob) {
- qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
- qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
- "from: " QLA_FW_URL ".\n");
+ ql_log(ql_log_info, vha, 0x0083,
+ "Fimware image unavailable.\n");
+ ql_log(ql_log_info, vha, 0x0084,
+ "Firmware images can be retrieved from: "QLA_FW_URL ".\n");
return QLA_FUNCTION_FAILED;
}
@@ -4729,8 +4739,8 @@
/* Validate firmware image by checking version. */
if (blob->fw->size < 8 * sizeof(uint16_t)) {
- qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of firmware image (%Zd)!\n",
+ ql_log(ql_log_fatal, vha, 0x0085,
+ "Unable to verify integrity of firmware image (%Zd).\n",
blob->fw->size);
goto fail_fw_integrity;
}
@@ -4739,11 +4749,11 @@
if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
wcode[2] == 0 && wcode[3] == 0)) {
- qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of firmware image!\n");
- qla_printk(KERN_WARNING, ha,
- "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
- wcode[1], wcode[2], wcode[3]);
+ ql_log(ql_log_fatal, vha, 0x0086,
+ "Unable to verify integrity of firmware image.\n");
+ ql_log(ql_log_fatal, vha, 0x0087,
+ "Firmware data: %04x %04x %04x %04x.\n",
+ wcode[0], wcode[1], wcode[2], wcode[3]);
goto fail_fw_integrity;
}
@@ -4756,9 +4766,9 @@
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint16_t);
if (blob->fw->size < fwclen) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_fatal, vha, 0x0088,
"Unable to verify integrity of firmware image "
- "(%Zd)!\n", blob->fw->size);
+ "(%Zd).\n", blob->fw->size);
goto fail_fw_integrity;
}
@@ -4767,10 +4777,9 @@
wlen = (uint16_t)(ha->fw_transfer_size >> 1);
if (wlen > risc_size)
wlen = risc_size;
-
- DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
- "addr %x, number of words 0x%x.\n", vha->host_no,
- risc_addr, wlen));
+ ql_dbg(ql_dbg_init, vha, 0x0089,
+ "Loading risc segment@ risc addr %x number of "
+ "words 0x%x.\n", risc_addr, wlen);
for (i = 0; i < wlen; i++)
wcode[i] = swab16(fwcode[i]);
@@ -4778,12 +4787,9 @@
rval = qla2x00_load_ram(vha, req->dma, risc_addr,
wlen);
if (rval) {
- DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
- "segment %d of firmware\n", vha->host_no,
- fragment));
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to load segment %d of "
- "firmware\n", fragment);
+ ql_log(ql_log_fatal, vha, 0x008a,
+ "Failed to load segment %d of firmware.\n",
+ fragment);
break;
}
@@ -4819,15 +4825,17 @@
/* Load firmware blob. */
blob = qla2x00_request_firmware(vha);
if (!blob) {
- qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
- qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
- "from: " QLA_FW_URL ".\n");
+ ql_log(ql_log_warn, vha, 0x0090,
+ "Fimware image unavailable.\n");
+ ql_log(ql_log_warn, vha, 0x0091,
+ "Firmware images can be retrieved from: "
+ QLA_FW_URL ".\n");
return QLA_FUNCTION_FAILED;
}
- qla_printk(KERN_INFO, ha,
- "FW: Loading via request-firmware...\n");
+ ql_log(ql_log_info, vha, 0x0092,
+ "Loading via request-firmware.\n");
rval = QLA_SUCCESS;
@@ -4839,8 +4847,8 @@
/* Validate firmware image by checking version. */
if (blob->fw->size < 8 * sizeof(uint32_t)) {
- qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of firmware image (%Zd)!\n",
+ ql_log(ql_log_fatal, vha, 0x0093,
+ "Unable to verify integrity of firmware image (%Zd).\n",
blob->fw->size);
goto fail_fw_integrity;
}
@@ -4850,11 +4858,12 @@
dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
- qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of firmware image!\n");
- qla_printk(KERN_WARNING, ha,
- "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
- dcode[1], dcode[2], dcode[3]);
+ ql_log(ql_log_fatal, vha, 0x0094,
+ "Unable to verify integrity of firmware image (%Zd).\n",
+ blob->fw->size);
+ ql_log(ql_log_fatal, vha, 0x0095,
+ "Firmware data: %08x %08x %08x %08x.\n",
+ dcode[0], dcode[1], dcode[2], dcode[3]);
goto fail_fw_integrity;
}
@@ -4866,9 +4875,9 @@
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint32_t);
if (blob->fw->size < fwclen) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_fatal, vha, 0x0096,
"Unable to verify integrity of firmware image "
- "(%Zd)!\n", blob->fw->size);
+ "(%Zd).\n", blob->fw->size);
goto fail_fw_integrity;
}
@@ -4879,9 +4888,9 @@
if (dlen > risc_size)
dlen = risc_size;
- DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
- "addr %x, number of dwords 0x%x.\n", vha->host_no,
- risc_addr, dlen));
+ ql_dbg(ql_dbg_init, vha, 0x0097,
+ "Loading risc segment@ risc addr %x "
+ "number of dwords 0x%x.\n", risc_addr, dlen);
for (i = 0; i < dlen; i++)
dcode[i] = swab32(fwcode[i]);
@@ -4889,12 +4898,9 @@
rval = qla2x00_load_ram(vha, req->dma, risc_addr,
dlen);
if (rval) {
- DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
- "segment %d of firmware\n", vha->host_no,
- fragment));
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to load segment %d of "
- "firmware\n", fragment);
+ ql_log(ql_log_fatal, vha, 0x0098,
+ "Failed to load segment %d of firmware.\n",
+ fragment);
break;
}
@@ -4958,14 +4964,13 @@
if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
return rval;
- qla_printk(KERN_ERR, ha,
- "FW: Attempting to fallback to golden firmware...\n");
+ ql_log(ql_log_info, vha, 0x0099,
+ "Attempting to fallback to golden firmware.\n");
rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
if (rval != QLA_SUCCESS)
return rval;
- qla_printk(KERN_ERR, ha,
- "FW: Please update operational firmware...\n");
+ ql_log(ql_log_info, vha, 0x009a, "Update operational firmware.\n");
ha->flags.running_gold_fw = 1;
return rval;
@@ -4992,8 +4997,8 @@
continue;
if (qla2x00_setup_chip(vha) != QLA_SUCCESS)
continue;
- qla_printk(KERN_INFO, ha,
- "Attempting retry of stop-firmware command...\n");
+ ql_log(ql_log_info, vha, 0x8015,
+ "Attempting retry of stop-firmware command.\n");
ret = qla2x00_stop_firmware(vha);
}
}
@@ -5028,10 +5033,10 @@
/* Login to SNS first */
ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb, BIT_1);
if (mb[0] != MBS_COMMAND_COMPLETE) {
- DEBUG15(qla_printk(KERN_INFO, ha,
- "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
- "mb[2]=%x mb[6]=%x mb[7]=%x\n", NPH_SNS,
- mb[0], mb[1], mb[2], mb[6], mb[7]));
+ ql_dbg(ql_dbg_init, vha, 0x0103,
+ "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x "
+ "mb[6]=%x mb[7]=%x.\n",
+ NPH_SNS, mb[0], mb[1], mb[2], mb[6], mb[7]);
return (QLA_FUNCTION_FAILED);
}
@@ -5151,19 +5156,23 @@
for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
chksum += le32_to_cpu(*dptr++);
- DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
- DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
+ ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0111,
+ "Contents of NVRAM:\n");
+ ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0112,
+ (uint8_t *)nv, ha->nvram_size);
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
|| nv->id[3] != ' ' ||
nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
/* Reset NVRAM data. */
- qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
- "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
+ ql_log(ql_log_info, vha, 0x0073,
+ "Inconisistent NVRAM detected: checksum=0x%x id=%c "
+ "version=0x%x.\n", chksum, nv->id[0],
le16_to_cpu(nv->nvram_version));
- qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
- "invalid -- WWPN) defaults.\n");
+ ql_log(ql_log_info, vha, 0x0074,
+ "Falling back to functioning (yet invalid -- WWPN) "
+ "defaults.\n");
/*
* Set default initialization control block.
@@ -5355,12 +5364,10 @@
if (ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = QLA_ZIO_MODE_6;
- DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
- "(%d us).\n", vha->host_no, ha->zio_mode,
- ha->zio_timer * 100));
- qla_printk(KERN_INFO, ha,
+ ql_log(ql_log_info, vha, 0x0075,
"ZIO mode %d enabled; timer delay (%d us).\n",
- ha->zio_mode, ha->zio_timer * 100);
+ ha->zio_mode,
+ ha->zio_timer * 100);
icb->firmware_options_2 |= cpu_to_le32(
(uint32_t)ha->zio_mode);
@@ -5369,8 +5376,8 @@
}
if (rval) {
- DEBUG2_3(printk(KERN_WARNING
- "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
+ ql_log(ql_log_warn, vha, 0x0076,
+ "NVRAM configuration failed.\n");
}
return (rval);
}
@@ -5393,9 +5400,8 @@
status = qla2x00_fw_ready(vha);
if (!status) {
- qla_printk(KERN_INFO, ha,
- "%s(): Start configure loop, "
- "status = %d\n", __func__, status);
+ ql_log(ql_log_info, vha, 0x803c,
+ "Start configure loop, status =%d.\n", status);
/* Issue a marker after FW becomes ready. */
qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
@@ -5417,9 +5423,8 @@
if ((vha->device_flags & DFLG_NO_CABLE))
status = 0;
- qla_printk(KERN_INFO, ha,
- "%s(): Configure loop done, status = 0x%x\n",
- __func__, status);
+ ql_log(ql_log_info, vha, 0x803d,
+ "Configure loop done, status = 0x%x.\n", status);
}
if (!status) {
@@ -5455,9 +5460,9 @@
ha->fce_dma, ha->fce_bufs, ha->fce_mb,
&ha->fce_bufs);
if (rval) {
- qla_printk(KERN_WARNING, ha,
- "Unable to reinitialize FCE "
- "(%d).\n", rval);
+ ql_log(ql_log_warn, vha, 0x803e,
+ "Unable to reinitialize FCE (%d).\n",
+ rval);
ha->flags.fce_enabled = 0;
}
}
@@ -5467,17 +5472,16 @@
rval = qla2x00_enable_eft_trace(vha,
ha->eft_dma, EFT_NUM_BUFFERS);
if (rval) {
- qla_printk(KERN_WARNING, ha,
- "Unable to reinitialize EFT "
- "(%d).\n", rval);
+ ql_log(ql_log_warn, vha, 0x803f,
+ "Unable to reinitialize EFT (%d).\n",
+ rval);
}
}
}
if (!status) {
- DEBUG(printk(KERN_INFO
- "qla82xx_restart_isp(%ld): succeeded.\n",
- vha->host_no));
+ ql_dbg(ql_dbg_taskm, vha, 0x8040,
+ "qla82xx_restart_isp succeeded.\n");
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
@@ -5494,8 +5498,8 @@
spin_unlock_irqrestore(&ha->vport_slock, flags);
} else {
- qla_printk(KERN_INFO, ha,
- "qla82xx_restart_isp: **** FAILED ****\n");
+ ql_log(ql_log_warn, vha, 0x8041,
+ "qla82xx_restart_isp **** FAILED ****.\n");
}
return status;
@@ -5645,9 +5649,8 @@
if (ret == QLA_SUCCESS)
fcport->fcp_prio = priority;
else
- DEBUG2(printk(KERN_WARNING
- "scsi(%ld): Unable to activate fcp priority, "
- " ret=0x%x\n", vha->host_no, ret));
+ ql_dbg(ql_dbg_user, vha, 0x704f,
+ "Unable to activate fcp priority, ret=0x%x.\n", ret);
return ret;
}