treewide: transciever/transceiver spelling fixes

Just tyops.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index cd16231..b01696e 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -88,9 +88,9 @@
 #define UDCISR_INT_MASK	(UDCICR_FIFOERR | UDCICR_PKTCOMPL)
 
 #define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transceiver Interrupt
 					   Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transceiver Interrupt
 					   Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
 					   Interrupt Enable */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c71b037..bcbd1ab 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1955,7 +1955,7 @@
 	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
 	 *   - stops powering VBUS
 	 *
-	 * There are various transciever configurations.  Blackfin,
+	 * There are various transceiver configurations.  Blackfin,
 	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
 	 * external/discrete ones in various flavors (twl4030 family,
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c28225..ca9b690 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -660,7 +660,7 @@
 	int		ret = IRQ_NONE;
 	struct isp1301	*isp = _isp;
 
-	/* update ISP1301 transciever from OTG controller */
+	/* update ISP1301 transceiver from OTG controller */
 	if (otg_irq & OPRT_CHG) {
 		omap_writew(OPRT_CHG, OTG_IRQ_SRC);
 		isp1301_defer_work(isp, WORK_UPDATE_ISP);
@@ -755,7 +755,7 @@
 		omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
 		ret = IRQ_HANDLED;
 
-	/* switch driver; the transciever code activates it,
+	/* switch driver; the transceiver code activates it,
 	 * ungating the udc clock or resuming OHCI.
 	 */
 	} else if (otg_irq & DRIVER_SWITCH) {