serial: samsung: Remove NULL checking for baud clock
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d8b0aee..5668538 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -529,7 +529,7 @@
switch (level) {
case 3:
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ if (!IS_ERR(ourport->baudclk))
clk_disable(ourport->baudclk);
clk_disable(ourport->clk);
@@ -538,7 +538,7 @@
case 0:
clk_enable(ourport->clk);
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ if (!IS_ERR(ourport->baudclk))
clk_enable(ourport->baudclk);
break;
@@ -604,7 +604,6 @@
char clkname[MAX_CLK_NAME_LENGTH];
int calc_deviation, deviation = (1 << 30) - 1;
- *best_clk = NULL;
clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
ourport->info->def_clk_sel;
for (cnt = 0; cnt < info->num_clks; cnt++) {
@@ -613,7 +612,7 @@
sprintf(clkname, "clk_uart_baud%d", cnt);
clk = clk_get(ourport->port.dev, clkname);
- if (IS_ERR_OR_NULL(clk))
+ if (IS_ERR(clk))
continue;
rate = clk_get_rate(clk);
@@ -684,7 +683,7 @@
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct clk *clk = NULL;
+ struct clk *clk = ERR_PTR(-EINVAL);
unsigned long flags;
unsigned int baud, quot, clk_sel = 0;
unsigned int ulcon;
@@ -705,7 +704,7 @@
quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
quot = port->custom_divisor;
- if (!clk)
+ if (IS_ERR(clk))
return;
/* check to see if we need to change clock source */
@@ -713,9 +712,9 @@
if (ourport->baudclk != clk) {
s3c24xx_serial_setsource(port, clk_sel);
- if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+ if (!IS_ERR(ourport->baudclk)) {
clk_disable(ourport->baudclk);
- ourport->baudclk = NULL;
+ ourport->baudclk = ERR_PTR(-EINVAL);
}
clk_enable(clk);
@@ -1160,6 +1159,9 @@
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ if (IS_ERR(ourport->baudclk))
+ return -EINVAL;
+
return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
}
@@ -1200,6 +1202,7 @@
return -ENODEV;
}
+ ourport->baudclk = ERR_PTR(-EINVAL);
ourport->info = ourport->drv_data->info;
ourport->cfg = (pdev->dev.platform_data) ?
(struct s3c2410_uartcfg *)pdev->dev.platform_data :
@@ -1387,7 +1390,7 @@
sprintf(clk_name, "clk_uart_baud%d", clk_sel);
clk = clk_get(port->dev, clk_name);
- if (!IS_ERR(clk) && clk != NULL)
+ if (!IS_ERR(clk))
rate = clk_get_rate(clk);
else
rate = 1;