mISDN: Add watchdog functionality to hfcmulti driver
This patch was made by Titus Moldovan and provides IOCTL functions for enabling
and disabling the controller's built in watchdog. The use is optional.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 0b28141..ca153de 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -4013,11 +4013,41 @@
static int
channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
{
+ struct hfc_multi *hc = dch->hw;
int ret = 0;
+ int wd_mode, wd_cnt;
switch (cq->op) {
case MISDN_CTRL_GETOP:
- cq->op = 0;
+ cq->op = MISDN_CTRL_HFC_OP;
+ break;
+ case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */
+ wd_cnt = cq->p1 & 0xf;
+ wd_mode = !!(cq->p1 >> 4);
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG
+ "%s: MISDN_CTRL_HFC_WD_INIT mode %s counter 0x%x\n",
+ __func__, wd_mode ? "AUTO" : "MANUAL", wd_cnt);
+ /* set the watchdog timer */
+ HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4));
+ hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */;
+ /* init the watchdog register and reset the counter */
+ HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
+ if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+ /* enable the watchdog output for Speech-Design */
+ HFC_outb(hc, R_GPIO_SEL, V_GPIO_SEL7);
+ HFC_outb(hc, R_GPIO_EN1, V_GPIO_EN15);
+ HFC_outb(hc, R_GPIO_OUT1, 0);
+ HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15);
+ }
+ break;
+ case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n",
+ __func__);
+ HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
break;
default:
printk(KERN_WARNING "%s: unknown Op %x\n",