Merge with master.kernel.org:/home/rmk/linux-2.6-rmk.git
This adds the missing arch/arm/lib/bitops.h file.
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 040451e..53eb5cf 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -608,9 +608,11 @@
acpi_fadt.sci_int = fadt->sci_int;
#endif
+#ifdef CONFIG_ACPI_BUS
/* initialize rev and apic_phys_dest_mode for x86_64 genapic */
acpi_fadt.revision = fadt->revision;
acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode;
+#endif
#ifdef CONFIG_X86_PM_TIMER
/* detect the location of the ACPI PM Timer */
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index c1b2333..7dbf997 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:22:54 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:05:59 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -104,6 +106,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -116,9 +119,10 @@
#
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_AMIGA=m
CONFIG_PARPORT_MFC3=m
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
@@ -133,6 +137,7 @@
CONFIG_AMIGA_Z2RAM=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -152,6 +157,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -212,6 +218,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -225,7 +232,6 @@
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -273,6 +279,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -296,7 +304,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -394,11 +401,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -470,7 +475,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -564,17 +568,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -593,21 +586,43 @@
CONFIG_MOUSE_AMIGA=y
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDDLER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AMIGA=m
+# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -653,6 +668,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -680,6 +699,11 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_CIRRUS=m
@@ -688,6 +712,7 @@
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_AMIGA_AGA=y
CONFIG_FB_FM2=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -707,6 +732,7 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -722,10 +748,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -736,6 +758,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_AMIGA_BUILTIN_SERIAL=y
@@ -758,10 +785,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -916,13 +949,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -941,7 +980,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -959,6 +999,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 648361b..505a296 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:22:58 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:00 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -99,6 +101,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -118,6 +121,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -137,6 +141,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -171,6 +176,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -196,6 +202,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -219,7 +227,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -320,11 +327,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -396,7 +401,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -469,16 +473,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -496,6 +490,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -536,6 +540,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -581,10 +589,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -595,6 +599,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_DN_SERIAL=y
@@ -615,10 +624,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -773,13 +788,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -798,7 +819,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -816,6 +838,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 1fb25c0..617aa73 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:11 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:18 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -100,6 +102,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -112,8 +115,9 @@
#
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
@@ -125,6 +129,7 @@
#
CONFIG_ATARI_FLOPPY=y
# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -144,6 +149,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -201,6 +207,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -228,6 +235,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -251,7 +260,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -349,11 +357,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -425,7 +431,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -499,17 +504,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -529,6 +523,17 @@
CONFIG_INPUT_UINPUT=m
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -574,6 +579,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -601,9 +610,15 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -619,6 +634,7 @@
# Logo configuration
#
# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -634,10 +650,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -648,6 +660,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_ATARI_MFPSER=m
@@ -672,9 +689,15 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -828,13 +851,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -853,7 +882,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -871,6 +901,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index f1f2cf0..b501db5 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:15 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:19 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -99,6 +101,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -118,6 +121,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -137,6 +141,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -171,6 +176,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -196,6 +202,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -219,7 +227,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -320,11 +327,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -395,7 +400,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -468,16 +472,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -495,6 +489,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -535,6 +539,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -580,10 +588,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -594,6 +598,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_BVME6000_SCC=y
@@ -614,10 +623,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -772,13 +787,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -797,7 +818,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -815,6 +837,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 53dde43..2bf6cef 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:40 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:21 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -100,6 +102,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -119,6 +122,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -138,6 +142,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -172,6 +177,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -197,6 +203,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -220,7 +228,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -321,11 +328,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -397,7 +402,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -470,16 +474,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -497,6 +491,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -537,6 +541,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -582,10 +590,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -596,6 +600,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
@@ -614,10 +623,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -772,13 +787,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -797,7 +818,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -815,6 +837,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 2452dac..7074f85 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:44 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:24 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -101,6 +103,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -120,6 +123,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -139,6 +143,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -196,6 +201,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -223,6 +229,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -258,7 +266,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -356,11 +363,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -435,7 +440,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -512,16 +516,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -539,6 +533,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -579,6 +583,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -606,10 +614,16 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_VALKYRIE=y
CONFIG_FB_MAC=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -630,6 +644,7 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -643,10 +658,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -657,6 +668,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_MAC_SCC=y
@@ -679,10 +695,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -846,18 +868,24 @@
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
+CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -876,7 +904,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -894,6 +923,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index ea38e87..61f09bc 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:49 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:28 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -99,6 +101,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -118,6 +121,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -137,6 +141,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -171,6 +176,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -197,6 +203,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -220,7 +228,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -321,11 +328,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -397,7 +402,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -470,16 +474,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -497,6 +491,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -537,6 +541,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -564,8 +572,14 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -584,6 +598,7 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -597,10 +612,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -611,6 +622,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_MVME147_SCC=y
@@ -631,10 +647,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -791,13 +813,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -816,7 +844,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -834,6 +863,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index f931a64..69c0100 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:53 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:31 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -99,6 +101,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -118,6 +121,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -137,6 +141,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -171,6 +176,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -196,6 +202,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -219,7 +227,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -320,11 +327,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -396,7 +401,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -469,16 +473,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -496,6 +490,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -536,6 +540,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -563,8 +571,14 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -583,6 +597,7 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -596,10 +611,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -610,6 +621,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_MVME162_SCC=y
@@ -630,10 +646,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -790,13 +812,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -815,7 +843,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -833,6 +862,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 713020c..550ec260 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:57 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:34 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -101,6 +103,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -123,6 +126,7 @@
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -142,6 +146,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -200,6 +205,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -213,7 +219,6 @@
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -250,6 +255,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -273,7 +280,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -374,11 +380,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -450,7 +454,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -539,17 +542,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_Q40KBD=m
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -570,6 +562,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_Q40KBD=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -610,6 +613,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -637,9 +644,15 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_Q40=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -658,6 +671,7 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -673,10 +687,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -687,6 +697,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
@@ -705,10 +720,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -863,13 +884,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -888,7 +915,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -906,6 +934,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 33c4db6..5b5a619 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:24:01 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:37 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -87,6 +89,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -106,6 +109,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -125,6 +129,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -159,6 +164,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -185,6 +191,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -208,7 +216,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -309,11 +316,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -385,7 +390,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -459,16 +463,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -486,6 +480,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -526,6 +530,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -553,8 +561,14 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -573,6 +587,7 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -586,10 +601,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -600,6 +611,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
@@ -618,10 +634,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -779,13 +801,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -804,7 +832,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -822,6 +851,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index fe008c9..704e423 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:24:05 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:06:40 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -26,23 +28,23 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -98,6 +100,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@@ -117,6 +120,7 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -136,6 +140,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
@@ -170,6 +175,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -196,6 +202,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -219,7 +227,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
@@ -320,11 +327,9 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -396,7 +401,6 @@
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -469,16 +473,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -496,6 +490,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -536,6 +540,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -563,8 +571,14 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -583,6 +597,7 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -596,10 +611,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -610,6 +621,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
@@ -628,10 +644,16 @@
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
@@ -789,13 +811,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
#
# Security options
@@ -814,7 +842,8 @@
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -832,6 +861,10 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig
index 78f57d3..5b2296e 100644
--- a/arch/m68k/defconfig
+++ b/arch/m68k/defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-m68k
-# Sun Dec 26 11:23:36 2004
+# Linux kernel version: 2.6.12-rc2-m68k
+# Tue Apr 5 14:05:31 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
@@ -14,6 +15,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -25,22 +27,22 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -92,6 +94,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
@@ -112,6 +115,7 @@
#
CONFIG_AMIGA_FLOPPY=y
# CONFIG_AMIGA_Z2RAM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
@@ -130,6 +134,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -164,6 +169,7 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -207,7 +213,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -324,16 +329,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -353,6 +348,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
CONFIG_VT=y
@@ -393,6 +398,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -420,6 +429,11 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -428,6 +442,7 @@
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_AMIGA_AGA=y
# CONFIG_FB_FM2 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -440,6 +455,7 @@
# Logo configuration
#
# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -453,10 +469,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -467,6 +479,11 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
# Character devices
#
CONFIG_AMIGA_BUILTIN_SERIAL=y
@@ -483,6 +500,10 @@
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
@@ -544,7 +565,6 @@
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -608,7 +628,10 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
#
# Security options
@@ -622,6 +645,10 @@
# CONFIG_CRYPTO is not set
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
# CONFIG_CRC_CCITT is not set
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 567c91c..1d3aa58 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -352,11 +352,11 @@
err |= put_user(old_encode_dev(stat->rdev), &statbuf->st_rdev);
err |= put_user(stat->size, &statbuf->st_size);
err |= put_user(stat->atime.tv_sec, &statbuf->st_atime);
- err |= put_user(0, &statbuf->__unused1);
+ err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec);
err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime);
- err |= put_user(0, &statbuf->__unused2);
+ err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec);
err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime);
- err |= put_user(0, &statbuf->__unused3);
+ err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec);
err |= put_user(stat->blksize, &statbuf->st_blksize);
err |= put_user(stat->blocks, &statbuf->st_blocks);
err |= put_user(0, &statbuf->__unused4[0]);
@@ -365,6 +365,68 @@
return err;
}
+int cp_compat_stat64(struct kstat *stat, struct compat_stat64 __user *statbuf)
+{
+ int err;
+
+ err = put_user(huge_encode_dev(stat->dev), &statbuf->st_dev);
+ err |= put_user(stat->ino, &statbuf->st_ino);
+ err |= put_user(stat->mode, &statbuf->st_mode);
+ err |= put_user(stat->nlink, &statbuf->st_nlink);
+ err |= put_user(stat->uid, &statbuf->st_uid);
+ err |= put_user(stat->gid, &statbuf->st_gid);
+ err |= put_user(huge_encode_dev(stat->rdev), &statbuf->st_rdev);
+ err |= put_user(0, (unsigned long __user *) &statbuf->__pad3[0]);
+ err |= put_user(stat->size, &statbuf->st_size);
+ err |= put_user(stat->blksize, &statbuf->st_blksize);
+ err |= put_user(0, (unsigned int __user *) &statbuf->__pad4[0]);
+ err |= put_user(0, (unsigned int __user *) &statbuf->__pad4[4]);
+ err |= put_user(stat->blocks, &statbuf->st_blocks);
+ err |= put_user(stat->atime.tv_sec, &statbuf->st_atime);
+ err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec);
+ err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime);
+ err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec);
+ err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime);
+ err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec);
+ err |= put_user(0, &statbuf->__unused4);
+ err |= put_user(0, &statbuf->__unused5);
+
+ return err;
+}
+
+asmlinkage long compat_sys_stat64(char __user * filename,
+ struct compat_stat64 __user *statbuf)
+{
+ struct kstat stat;
+ int error = vfs_stat(filename, &stat);
+
+ if (!error)
+ error = cp_compat_stat64(&stat, statbuf);
+ return error;
+}
+
+asmlinkage long compat_sys_lstat64(char __user * filename,
+ struct compat_stat64 __user *statbuf)
+{
+ struct kstat stat;
+ int error = vfs_lstat(filename, &stat);
+
+ if (!error)
+ error = cp_compat_stat64(&stat, statbuf);
+ return error;
+}
+
+asmlinkage long compat_sys_fstat64(unsigned int fd,
+ struct compat_stat64 __user * statbuf)
+{
+ struct kstat stat;
+ int error = vfs_fstat(fd, &stat);
+
+ if (!error)
+ error = cp_compat_stat64(&stat, statbuf);
+ return error;
+}
+
asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
{
return sys_sysfs(option, arg1, arg2);
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index a4ccb65..a5e36a4 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -32,7 +32,7 @@
.word sys32_umount, sys32_setgid16, sys32_getgid16, sys32_signal, sys32_geteuid16
/*50*/ .word sys32_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
.word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve
-/*60*/ .word sys32_umask, sys_chroot, compat_sys_newfstat, sys_fstat64, sys_getpagesize
+/*60*/ .word sys32_umask, sys_chroot, compat_sys_newfstat, compat_sys_fstat64, sys_getpagesize
.word sys32_msync, sys_vfork, sys32_pread64, sys32_pwrite64, sys_geteuid
/*70*/ .word sys_getegid, sys_mmap, sys_setreuid, sys_munmap, sys_mprotect
.word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys32_getgroups16
@@ -46,8 +46,8 @@
.word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
/*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod
.word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate
-/*130*/ .word sys_ftruncate, sys_flock, sys_lstat64, sys_nis_syscall, sys_nis_syscall
- .word sys_nis_syscall, sys32_mkdir, sys_rmdir, sys32_utimes, sys_stat64
+/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
+ .word sys_nis_syscall, sys32_mkdir, sys_rmdir, sys32_utimes, compat_sys_stat64
/*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
/*150*/ .word sys_nis_syscall, sys_nis_syscall, sys_nis_syscall, sys_poll, sys_getdents64
@@ -98,7 +98,7 @@
.word sys_umount, sys_setgid, sys_getgid, sys_signal, sys_geteuid
/*50*/ .word sys_getegid, sys_acct, sys_memory_ordering, sys_nis_syscall, sys_ioctl
.word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
-/*60*/ .word sys_umask, sys_chroot, sys_newfstat, sys_nis_syscall, sys_getpagesize
+/*60*/ .word sys_umask, sys_chroot, sys_newfstat, sys_stat64, sys_getpagesize
.word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall
/*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect
.word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups
@@ -112,8 +112,8 @@
.word sys_nis_syscall, sys_gettimeofday, sys_getrusage, sys_getsockopt, sys_getcwd
/*120*/ .word sys_readv, sys_writev, sys_settimeofday, sys_fchown, sys_fchmod
.word sys_recvfrom, sys_setreuid, sys_setregid, sys_rename, sys_truncate
-/*130*/ .word sys_ftruncate, sys_flock, sys_nis_syscall, sys_sendto, sys_shutdown
- .word sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_nis_syscall
+/*130*/ .word sys_ftruncate, sys_flock, sys_lstat64, sys_sendto, sys_shutdown
+ .word sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64
/*140*/ .word sys_sendfile64, sys_getpeername, sys_futex, sys_gettid, sys_getrlimit
.word sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write
/*150*/ .word sys_getsockname, sys_nis_syscall, sys_nis_syscall, sys_poll, sys_getdents64
diff --git a/drivers/block/scsi_ioctl.c b/drivers/block/scsi_ioctl.c
index 689527a..681871c 100644
--- a/drivers/block/scsi_ioctl.c
+++ b/drivers/block/scsi_ioctl.c
@@ -328,11 +328,6 @@
return 0;
}
-#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
-#define START_STOP_TIMEOUT (60 * HZ)
-#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
-#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
-#define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
#define OMAX_SB_LEN 16 /* For backward compatibility */
static int sg_scsi_ioctl(struct file *file, request_queue_t *q,
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 5fc5004..1fb5cdf 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -54,6 +54,9 @@
extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
+static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
+ unsigned long arg);
+
static spinlock_t i2o_config_lock;
#define MODINC(x,y) ((x) = ((x) + 1) % (y))
@@ -538,8 +541,7 @@
}
#ifdef CONFIG_COMPAT
-static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg,
- struct file *file)
+static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg)
{
struct i2o_cmd_passthru32 __user *cmd;
struct i2o_controller *c;
@@ -752,7 +754,26 @@
return rcode;
}
-#else
+static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+ int ret;
+ lock_kernel();
+ switch (cmd) {
+ case I2OGETIOPS:
+ ret = i2o_cfg_ioctl(NULL, file, cmd, arg);
+ break;
+ case I2OPASSTHRU32:
+ ret = i2o_cfg_passthru32(file, cmd, arg);
+ break;
+ default:
+ ret = -ENOIOCTLCMD;
+ break;
+ }
+ unlock_kernel();
+ return ret;
+}
+
+#endif
static int i2o_cfg_passthru(unsigned long arg)
{
@@ -958,7 +979,6 @@
kfree(reply);
return rcode;
}
-#endif
/*
* IOCTL Handler
@@ -1013,11 +1033,9 @@
ret = i2o_cfg_evt_get(arg, fp);
break;
-#ifndef CONFIG_COMPAT
case I2OPASSTHRU:
ret = i2o_cfg_passthru(arg);
break;
-#endif
default:
osm_debug("unknown ioctl called!\n");
@@ -1105,6 +1123,9 @@
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = i2o_cfg_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = i2o_cfg_compat_ioctl,
+#endif
.open = cfg_open,
.release = cfg_release,
.fasync = cfg_fasync,
@@ -1134,19 +1155,11 @@
misc_deregister(&i2o_miscdev);
return -EBUSY;
}
-#ifdef CONFIG_COMPAT
- register_ioctl32_conversion(I2OPASSTHRU32, i2o_cfg_passthru32);
- register_ioctl32_conversion(I2OGETIOPS, (void *)sys_ioctl);
-#endif
return 0;
}
static void i2o_config_exit(void)
{
-#ifdef CONFIG_COMPAT
- unregister_ioctl32_conversion(I2OPASSTHRU32);
- unregister_ioctl32_conversion(I2OGETIOPS);
-#endif
misc_deregister(&i2o_miscdev);
i2o_driver_unregister(&i2o_config_driver);
}
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 6a43322..a393cf4 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -89,10 +89,10 @@
("FCP (SCSI over Fibre Channel) HBA driver for IBM eServer zSeries");
MODULE_LICENSE("GPL");
-module_param(device, charp, 0);
+module_param(device, charp, 0400);
MODULE_PARM_DESC(device, "specify initial device");
-module_param(loglevel, uint, 0);
+module_param(loglevel, uint, 0400);
MODULE_PARM_DESC(loglevel,
"log levels, 8 nibbles: "
"FC ERP QDIO CIO Config FSF SCSI Other, "
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 53fcccb..0afa1c4 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -70,7 +70,7 @@
/********************* GENERAL DEFINES *********************************/
/* zfcp version number, it consists of major, minor, and patch-level number */
-#define ZFCP_VERSION "4.2.0"
+#define ZFCP_VERSION "4.3.0"
/**
* zfcp_sg_to_address - determine kernel address from struct scatterlist
@@ -851,6 +851,9 @@
wwn_t wwnn; /* WWNN */
wwn_t wwpn; /* WWPN */
fc_id_t s_id; /* N_Port ID */
+ wwn_t peer_wwnn; /* P2P peer WWNN */
+ wwn_t peer_wwpn; /* P2P peer WWPN */
+ fc_id_t peer_d_id; /* P2P peer D_ID */
struct ccw_device *ccw_device; /* S/390 ccw device */
u8 fc_service_class;
u32 fc_topology; /* FC topology */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index cfc0d8c..53ebc1cd 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -2568,6 +2568,23 @@
case ZFCP_ERP_STEP_UNINITIALIZED:
case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
case ZFCP_ERP_STEP_PORT_CLOSING:
+ if (adapter->fc_topology == FSF_TOPO_P2P) {
+ if (port->wwpn != adapter->peer_wwpn) {
+ ZFCP_LOG_NORMAL("Failed to open port 0x%016Lx "
+ "on adapter %s.\nPeer WWPN "
+ "0x%016Lx does not match\n",
+ port->wwpn,
+ zfcp_get_busid_by_adapter(adapter),
+ adapter->peer_wwpn);
+ zfcp_erp_port_failed(port);
+ retval = ZFCP_ERP_FAILED;
+ break;
+ }
+ port->d_id = adapter->peer_d_id;
+ atomic_set_mask(ZFCP_STATUS_PORT_DID_DID, &port->status);
+ retval = zfcp_erp_port_strategy_open_port(erp_action);
+ break;
+ }
if (!(adapter->nameserver_port)) {
retval = zfcp_nameserver_enqueue(adapter);
if (retval != 0) {
@@ -3516,8 +3533,9 @@
debug_text_event(adapter->erp_dbf, 3, "a_access_unblock");
debug_event(adapter->erp_dbf, 3, &adapter->name, 8);
- zfcp_erp_port_access_changed(adapter->nameserver_port);
read_lock_irqsave(&zfcp_data.config_lock, flags);
+ if (adapter->nameserver_port)
+ zfcp_erp_port_access_changed(adapter->nameserver_port);
list_for_each_entry(port, &adapter->port_list_head, list)
if (port != adapter->nameserver_port)
zfcp_erp_port_access_changed(port);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 578b9fb..148b11c 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2107,6 +2107,9 @@
bottom->low_qtcb_version, bottom->high_qtcb_version);
adapter->fsf_lic_version = bottom->lic_version;
adapter->supported_features = bottom->supported_features;
+ adapter->peer_wwpn = 0;
+ adapter->peer_wwnn = 0;
+ adapter->peer_d_id = 0;
if (xchg_ok) {
adapter->wwnn = bottom->nport_serv_param.wwnn;
@@ -2124,13 +2127,19 @@
adapter->hydra_version = 0;
}
+ if (adapter->fc_topology == FSF_TOPO_P2P) {
+ adapter->peer_d_id = bottom->peer_d_id & ZFCP_DID_MASK;
+ adapter->peer_wwpn = bottom->plogi_payload.wwpn;
+ adapter->peer_wwnn = bottom->plogi_payload.wwnn;
+ }
+
if(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT){
adapter->hardware_version = bottom->hardware_version;
memcpy(adapter->serial_number, bottom->serial_number, 17);
EBCASC(adapter->serial_number, sizeof(adapter->serial_number));
}
- ZFCP_LOG_INFO("The adapter %s reported the following characteristics:\n"
+ ZFCP_LOG_NORMAL("The adapter %s reported the following characteristics:\n"
"WWNN 0x%016Lx, "
"WWPN 0x%016Lx, "
"S_ID 0x%08x,\n"
@@ -2194,14 +2203,18 @@
switch (adapter->fc_topology) {
case FSF_TOPO_P2P:
ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n");
- ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel "
- "configuration detected at adapter %s "
- "unsupported, shutting down adapter\n",
- zfcp_get_busid_by_adapter(adapter));
+ ZFCP_LOG_NORMAL("Point-to-Point fibrechannel "
+ "configuration detected at adapter %s\n"
+ "Peer WWNN 0x%016llx, "
+ "peer WWPN 0x%016llx, "
+ "peer d_id 0x%06x\n",
+ zfcp_get_busid_by_adapter(adapter),
+ adapter->peer_wwnn,
+ adapter->peer_wwpn,
+ adapter->peer_d_id);
debug_text_event(fsf_req->adapter->erp_dbf, 0,
"top-p-to-p");
- zfcp_erp_adapter_shutdown(adapter, 0);
- return -EIO;
+ break;
case FSF_TOPO_AL:
ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n");
ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel "
@@ -2226,6 +2239,7 @@
"of a type known to the zfcp "
"driver, shutting down adapter\n",
zfcp_get_busid_by_adapter(adapter));
+ adapter->fc_topology = FSF_TOPO_ERROR;
debug_text_exception(fsf_req->adapter->erp_dbf, 0,
"unknown-topo");
zfcp_erp_adapter_shutdown(adapter, 0);
@@ -4281,6 +4295,7 @@
bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE);
zfcp_cmd_dbf_event_fsf("undeffcp", fsf_req, NULL, 0);
set_host_byte(&scpnt->result, DID_ERROR);
+ goto skip_fsfstatus;
}
}
@@ -4334,7 +4349,7 @@
scpnt->resid = fcp_rsp_iu->fcp_resid;
if (scpnt->request_bufflen - scpnt->resid < scpnt->underflow)
- scpnt->result |= DID_ERROR << 16;
+ set_host_byte(&scpnt->result, DID_ERROR);
}
skip_fsfstatus:
@@ -4607,6 +4622,13 @@
if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) {
switch (header->fsf_status_qual.word[0]) {
+ case FSF_SQ_CFDC_HARDENED_ON_SE:
+ ZFCP_LOG_NORMAL(
+ "CFDC on the adapter %s has being "
+ "hardened on primary and secondary SE\n",
+ zfcp_get_busid_by_adapter(adapter));
+ break;
+
case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE:
ZFCP_LOG_NORMAL(
"CFDC of the adapter %s could not "
diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h
index 5889956..07140df 100644
--- a/drivers/s390/scsi/zfcp_fsf.h
+++ b/drivers/s390/scsi/zfcp_fsf.h
@@ -129,6 +129,7 @@
#define FSF_SQ_NO_RETRY_POSSIBLE 0x07
/* FSF status qualifier for CFDC commands */
+#define FSF_SQ_CFDC_HARDENED_ON_SE 0x00000000
#define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE 0x00000001
#define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2 0x00000002
/* CFDC subtable codes */
@@ -357,7 +358,6 @@
u8 class3_serv_param[16];
u8 class4_serv_param[16];
u8 vendor_version_level[16];
- u8 res1[16];
} __attribute__ ((packed));
struct fsf_plogi {
@@ -415,11 +415,13 @@
u8 res2[12];
u32 s_id;
struct fsf_nport_serv_param nport_serv_param;
+ u8 reserved_nport_serv_param[16];
u8 res3[8];
u32 adapter_ports;
u32 hardware_version;
u8 serial_number[32];
- u8 res4[272];
+ struct fsf_nport_serv_param plogi_payload;
+ u8 res4[160];
} __attribute__ ((packed));
struct fsf_qtcb_bottom_port {
diff --git a/drivers/s390/scsi/zfcp_sysfs_adapter.c b/drivers/s390/scsi/zfcp_sysfs_adapter.c
index ff28ade..23e2dca 100644
--- a/drivers/s390/scsi/zfcp_sysfs_adapter.c
+++ b/drivers/s390/scsi/zfcp_sysfs_adapter.c
@@ -65,6 +65,9 @@
ZFCP_DEFINE_ADAPTER_ATTR(wwnn, "0x%016llx\n", adapter->wwnn);
ZFCP_DEFINE_ADAPTER_ATTR(wwpn, "0x%016llx\n", adapter->wwpn);
ZFCP_DEFINE_ADAPTER_ATTR(s_id, "0x%06x\n", adapter->s_id);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_wwnn, "0x%016llx\n", adapter->peer_wwnn);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_wwpn, "0x%016llx\n", adapter->peer_wwpn);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_d_id, "0x%06x\n", adapter->peer_d_id);
ZFCP_DEFINE_ADAPTER_ATTR(card_version, "0x%04x\n", adapter->hydra_version);
ZFCP_DEFINE_ADAPTER_ATTR(lic_version, "0x%08x\n", adapter->fsf_lic_version);
ZFCP_DEFINE_ADAPTER_ATTR(fc_link_speed, "%d Gb/s\n", adapter->fc_link_speed);
@@ -255,6 +258,9 @@
&dev_attr_wwnn.attr,
&dev_attr_wwpn.attr,
&dev_attr_s_id.attr,
+ &dev_attr_peer_wwnn.attr,
+ &dev_attr_peer_wwpn.attr,
+ &dev_attr_peer_d_id.attr,
&dev_attr_card_version.attr,
&dev_attr_lic_version.attr,
&dev_attr_fc_link_speed.attr,
diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index 8ead55f..2341d27 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -280,6 +280,7 @@
#endif
#include "scsi.h"
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
#include "53c7xx.h"
#include <linux/stat.h>
@@ -1721,9 +1722,9 @@
printk ("scsi%d : test 2 INQUIRY to target %d, lun 0 : %s\n",
host->host_no, i, data + 8);
printk ("scsi%d : status ", host->host_no);
- print_status (status);
+ scsi_print_status (status);
printk ("\nscsi%d : message ", host->host_no);
- print_msg (&msg);
+ scsi_print_msg (&msg);
printk ("\n");
} else if (hostdata->test_completed == 3) {
printk("scsi%d : test 2 no connection with target %d\n",
@@ -2312,7 +2313,7 @@
printk ("scsi%d : received message", host->host_no);
if (c)
printk (" from target %d lun %d ", c->device->id, c->device->lun);
- print_msg ((unsigned char *) hostdata->msg_buf);
+ scsi_print_msg ((unsigned char *) hostdata->msg_buf);
printk("\n");
}
@@ -3204,7 +3205,7 @@
case WRITE_10:
#if 0
printk("scsi%d : command is ", host->host_no);
- print_command(cmd->cmnd);
+ __scsi_print_command(cmd->cmnd);
#endif
#if 0
printk ("scsi%d : %d scatter/gather segments\n", host->host_no,
@@ -3232,7 +3233,7 @@
*/
default:
printk("scsi%d : datain+dataout for command ", host->host_no);
- print_command(cmd->cmnd);
+ __scsi_print_command(cmd->cmnd);
datain = dataout = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
}
@@ -3938,7 +3939,7 @@
if (cmd) {
printk("scsi%d : target %d, lun %d, command ",
host->host_no, cmd->cmd->device->id, cmd->cmd->device->lun);
- print_command (cmd->cmd->cmnd);
+ __scsi_print_command (cmd->cmd->cmnd);
printk("scsi%d : dsp = 0x%x (virt 0x%p)\n", host->host_no,
NCR53c7x0_read32(DSP_REG),
bus_to_virt(NCR53c7x0_read32(DSP_REG)));
@@ -4208,7 +4209,7 @@
if (hostdata->options & OPTION_DEBUG_INTR) {
printk ("scsi%d : command complete : pid %lu, id %d,lun %d result 0x%x ",
host->host_no, tmp->pid, tmp->device->id, tmp->device->lun, tmp->result);
- print_command (tmp->cmnd);
+ __scsi_print_command (tmp->cmnd);
}
tmp->scsi_done(tmp);
@@ -4297,7 +4298,7 @@
printk("scsi%d : interrupt for pid %lu, id %d, lun %d ",
host->host_no, cmd->cmd->pid, (int) cmd->cmd->device->id,
(int) cmd->cmd->device->lun);
- print_command (cmd->cmd->cmnd);
+ __scsi_print_command (cmd->cmd->cmnd);
} else {
printk("scsi%d : no active command\n", host->host_no);
}
@@ -5539,7 +5540,7 @@
i > 0 && !check_address ((unsigned long) ptr, 1);
ptr += len, i -= len) {
printk(" ");
- len = print_msg (ptr);
+ len = scsi_print_msg (ptr);
printk("\n");
if (!len)
break;
@@ -5554,7 +5555,7 @@
if (cmd) {
printk(" result = 0x%x, target = %d, lun = %d, cmd = ",
cmd->result, cmd->device->id, cmd->device->lun);
- print_command(cmd->cmnd);
+ __scsi_print_command(cmd->cmnd);
} else
printk("\n");
printk(" + %d : dsa_next = 0x%x\n", hostdata->dsa_next,
@@ -6028,7 +6029,7 @@
virt_to_bus(event.dsa), event.dsa);
if (event.pid != -1) {
printk (" event for pid %ld ", event.pid);
- print_command (event.cmnd);
+ __scsi_print_command (event.cmnd);
}
}
}
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 41b5197..15e4b12 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2958,13 +2958,6 @@
struct BusLogic_CCB *CCB;
BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested);
/*
- If this Command has already completed, then no Abort is necessary.
- */
- if (Command->serial_number != Command->serial_number_at_timeout) {
- BusLogic_Warning("Unable to Abort Command to Target %d - " "Already Completed\n", HostAdapter, TargetID);
- return SUCCESS;
- }
- /*
Attempt to find an Active CCB for this Command. If no Active CCB for this
Command is found, then no Abort is necessary.
*/
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 5e71a0b..770fa84 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -86,6 +86,7 @@
* 5. Test linked command handling code after Eric is ready with
* the high level code.
*/
+#include <scsi/scsi_dbg.h>
#if (NDEBUG & NDEBUG_LISTS)
#define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); }
@@ -2371,7 +2372,7 @@
* 3..length+1 arguments
*
* Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since print_msg() wants the whole thing.
+ * byte, since scsi_print_msg() wants the whole thing.
*/
extended_msg[0] = EXTENDED_MESSAGE;
/* Accept first byte by clearing ACK */
@@ -2418,7 +2419,7 @@
default:
if (!tmp) {
printk("scsi%d: rejecting message ", instance->host_no);
- print_msg(extended_msg);
+ scsi_print_msg(extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
printk("scsi%d: rejecting unknown message %02x from target %d, lun %d\n", instance->host_no, tmp, cmd->device->id, cmd->device->lun);
@@ -2552,7 +2553,7 @@
if (!(msg[0] & 0x80)) {
printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no);
- print_msg(msg);
+ scsi_print_msg(msg);
abort = 1;
} else {
/* Accept message by clearing ACK */
@@ -2677,7 +2678,7 @@
Scsi_Cmnd *tmp, **prev;
printk(KERN_WARNING "scsi%d : aborting command\n", instance->host_no);
- print_Scsi_Cmnd(cmd);
+ scsi_print_command(cmd);
NCR5380_print_status(instance);
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 9962c51..04cb5c4 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9198,16 +9198,13 @@
s->use_sg, s->sglist_len, s->abort_reason);
printk(
-" serial_number 0x%x, serial_number_at_timeout 0x%x, retries %d, allowed %d\n",
- (unsigned) s->serial_number, (unsigned) s->serial_number_at_timeout,
- s->retries, s->allowed);
+" serial_number 0x%x, retries %d, allowed %d\n",
+ (unsigned) s->serial_number, s->retries, s->allowed);
printk(
" timeout_per_command %d, timeout_total %d, timeout %d\n",
s->timeout_per_command, s->timeout_total, s->timeout);
- printk(" internal_timeout %u\n", s->internal_timeout);
-
printk(
" scsi_done 0x%lx, done 0x%lx, host_scribble 0x%lx, result 0x%x\n",
(ulong) s->scsi_done, (ulong) s->done,
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index d7b8efe..88d119f 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -257,6 +257,7 @@
#include <scsi/scsicam.h>
#include "scsi.h"
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
#include "aha152x.h"
@@ -986,7 +987,7 @@
if (HOSTDATA(shpnt)->debug & debug_queue) {
printk(INFO_LEAD "queue: %p; cmd_len=%d pieces=%d size=%u cmnd=",
CMDINFO(SCpnt), SCpnt, SCpnt->cmd_len, SCpnt->use_sg, SCpnt->request_bufflen);
- print_command(SCpnt->cmnd);
+ __scsi_print_command(SCpnt->cmnd);
}
#endif
@@ -1560,7 +1561,7 @@
#if 0
if(HOSTDATA(shpnt)->debug & debug_eh) {
printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
- print_sense("bh", DONE_SC);
+ scsi_print_sense("bh", DONE_SC);
}
#endif
@@ -1846,7 +1847,7 @@
#if defined(AHA152X_DEBUG)
if (HOSTDATA(shpnt)->debug & debug_msgi) {
printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0));
- print_msg(&MSGI(0));
+ scsi_print_msg(&MSGI(0));
printk("\n");
}
#endif
@@ -1934,7 +1935,7 @@
break;
printk(INFO_LEAD, CMDINFO(CURRENT_SC));
- print_msg(&MSGI(0));
+ scsi_print_msg(&MSGI(0));
printk("\n");
ticks = (MSGI(3) * 4 + 49) / 50;
@@ -2032,7 +2033,7 @@
int i;
printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC));
- for (i=0; i<MSGOLEN; i+=print_msg(&MSGO(i)), printk(" "))
+ for (i=0; i<MSGOLEN; i+=scsi_print_msg(&MSGO(i)), printk(" "))
;
printk(")\n");
}
@@ -2104,7 +2105,7 @@
#if defined(AHA152X_DEBUG)
if (HOSTDATA(shpnt)->debug & debug_cmd) {
printk(DEBUG_LEAD "cmd_init: ", CMDINFO(CURRENT_SC));
- print_command(CURRENT_SC->cmnd);
+ __scsi_print_command(CURRENT_SC->cmnd);
}
#endif
@@ -2158,7 +2159,7 @@
#if defined(AHA152X_DEBUG)
if (HOSTDATA(shpnt)->debug & debug_status) {
printk(DEBUG_LEAD "inbound status %02x ", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.Status);
- print_status(CURRENT_SC->SCp.Status);
+ scsi_print_status(CURRENT_SC->SCp.Status);
printk("\n");
}
#endif
@@ -2925,7 +2926,7 @@
printk(KERN_DEBUG "0x%08x: target=%d; lun=%d; cmnd=(",
(unsigned int) ptr, ptr->device->id, ptr->device->lun);
- print_command(ptr->cmnd);
+ __scsi_print_command(ptr->cmnd);
printk(KERN_DEBUG "); request_bufflen=%d; resid=%d; phase |",
ptr->request_bufflen, ptr->resid);
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 24dd0b8..be2caec 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -150,6 +150,7 @@
#include <asm/ecard.h>
#include "../scsi.h"
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
#include "acornscsi.h"
#include "msgqueue.h"
@@ -866,7 +867,7 @@
default:
printk(KERN_ERR "scsi%d.H: incomplete data transfer detected: result=%08X command=",
host->host->host_no, SCpnt->result);
- print_command(SCpnt->cmnd);
+ __scsi_print_command(SCpnt->cmnd);
acornscsi_dumpdma(host, "done");
acornscsi_dumplog(host, SCpnt->device->id);
SCpnt->result &= 0xffff;
@@ -1369,7 +1370,7 @@
host->scsi.last_message = msg->msg[0];
#if (DEBUG & DEBUG_MESSAGES)
- print_msg(msg->msg);
+ scsi_print_msg(msg->msg);
#endif
break;
@@ -1391,7 +1392,7 @@
while ((msg = msgqueue_getmsg(&host->scsi.msgs, msgnr++)) != NULL) {
unsigned int i;
#if (DEBUG & DEBUG_MESSAGES)
- print_msg(msg);
+ scsi_print_msg(msg);
#endif
i = 0;
if (acornscsi_write_pio(host, msg->msg, &i, msg->length, 1000000))
@@ -1487,7 +1488,7 @@
#if (DEBUG & DEBUG_MESSAGES)
printk("scsi%d.%c: message in: ",
host->host->host_no, acornscsi_target(host));
- print_msg(message);
+ scsi_print_msg(message);
printk("\n");
#endif
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 5411e85..0a172c1 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -52,6 +52,7 @@
#include <asm/ecard.h>
#include "../scsi.h"
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
#include "fas216.h"
#include "scsi.h"
@@ -309,7 +310,7 @@
va_end(args);
printk(" CDB: ");
- print_command(SCpnt->cmnd);
+ __scsi_print_command(SCpnt->cmnd);
}
static void
@@ -2081,7 +2082,7 @@
info->host->host_no, '0' + SCpnt->device->id,
SCpnt->result, info->scsi.SCp.ptr,
info->scsi.SCp.this_residual);
- print_command(SCpnt->cmnd);
+ __scsi_print_command(SCpnt->cmnd);
SCpnt->result &= ~(255 << 16);
SCpnt->result |= DID_BAD_TARGET << 16;
goto request_sense;
@@ -2170,7 +2171,7 @@
info->host->host_no, '0' + SCpnt->device->id,
info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
info->scsi.SCp.ptr = NULL;
- print_command(SCpnt->cmnd);
+ __scsi_print_command(SCpnt->cmnd);
}
/*
@@ -2426,7 +2427,7 @@
info->stats.aborts += 1;
printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no);
- print_command(SCpnt->data_cmnd);
+ __scsi_print_command(SCpnt->data_cmnd);
print_debug_list();
fas216_dumpstate(info);
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 2f1b3f4..48e1c4d 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -108,7 +108,7 @@
#if 0 //def BELT_AND_BRACES
printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for "
"command ", SCpnt->host->host_no, '0' + SCpnt->target);
- print_command(SCpnt->cmnd);
+ __scsi_print_command(SCpnt->cmnd);
#endif
SCpnt->SCp.ptr = NULL;
}
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 5d1e78e..2c12be7 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -73,6 +73,7 @@
* 1. Test linked command handling code after Eric is ready with
* the high level code.
*/
+#include <scsi/scsi_dbg.h>
#if (NDEBUG & NDEBUG_LISTS)
#define LIST(x,y) \
@@ -2354,7 +2355,7 @@
* 3..length+1 arguments
*
* Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since print_msg() wants the whole thing.
+ * byte, since scsi_print_msg() wants the whole thing.
*/
extended_msg[0] = EXTENDED_MESSAGE;
/* Accept first byte by clearing ACK */
@@ -2407,7 +2408,7 @@
default:
if (!tmp) {
printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
- print_msg (extended_msg);
+ scsi_print_msg (extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
printk(KERN_DEBUG "scsi%d: rejecting unknown "
@@ -2540,7 +2541,7 @@
if (!(msg[0] & 0x80)) {
printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
- print_msg(msg);
+ scsi_print_msg(msg);
do_abort(instance);
return;
}
@@ -2646,7 +2647,7 @@
unsigned long flags;
printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- print_Scsi_Cmnd (cmd);
+ scsi_print_command(cmd);
NCR5380_print_status (instance);
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index d625fde..ec16173 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -372,7 +372,7 @@
/**
*
- * print_status - print scsi status description
+ * scsi_print_status - print scsi status description
* @scsi_status: scsi status value
*
* If the status is recognized, the description is printed.
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index e46096d..47c263e 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -833,13 +833,6 @@
if (!ha->active)
return (FAILED);
- if (SC->serial_number != SC->serial_number_at_timeout) {
- /* HMM, looks like a bogus command */
- DEBUG(1, "Abort called with bogus scsi command");
-
- return (FAILED);
- }
-
/* See if the command is on the copp queue */
item = ha->copp_waitlist.head;
while ((item) && (item->scsi_cmd != SC))
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 7ae1323..2a0e42e 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -7486,24 +7486,14 @@
struct scsi_cmnd *done_list;
#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
- printk("ncr53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n",
- cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout);
+ printk("ncr53c8xx_abort: pid=%lu serial_number=%ld\n",
+ cmd->pid, cmd->serial_number);
#else
printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid);
#endif
NCR_LOCK_NCB(np, flags);
-#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
- /*
- * We have to just ignore abort requests in some situations.
- */
- if (cmd->serial_number != cmd->serial_number_at_timeout) {
- sts = SCSI_ABORT_NOT_RUNNING;
- goto out;
- }
-#endif
-
sts = ncr_abort_command(np, cmd);
out:
done_list = np->done_list;
diff --git a/drivers/scsi/pci2000.c b/drivers/scsi/pci2000.c
index 60ce1cc..d58f303 100644
--- a/drivers/scsi/pci2000.c
+++ b/drivers/scsi/pci2000.c
@@ -438,8 +438,8 @@
if ( bus )
{
DEB (if(*cdb) printk ("\nCDB: %X- %X %X %X %X %X %X %X %X %X %X ", SCpnt->cmd_len, cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9]));
- DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d, internal_timout: %d", SCpnt->timeout_per_command,
- SCpnt->timeout_total, SCpnt->timeout, SCpnt->internal_timeout));
+ DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d", SCpnt->timeout_per_command,
+ SCpnt->timeout_total, SCpnt->timeout));
outl (SCpnt->timeout_per_command, padapter->mb1);
outb_p (CMD_SCSI_TIMEOUT, padapter->cmd);
if ( WaitReady (padapter) )
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index dcc33da..0e8ebbc 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1050,10 +1050,8 @@
for (i = 0; i < cmd->cmd_len; i++) {
printk("0x%02x ", cmd->cmnd[i]);
}
- printk("\n seg_cnt=%d, allowed=%d, retries=%d, "
- "serial_number_at_timeout=0x%lx\n",
- cmd->use_sg, cmd->allowed, cmd->retries,
- cmd->serial_number_at_timeout);
+ printk("\n seg_cnt=%d, allowed=%d, retries=%d\n",
+ cmd->use_sg, cmd->allowed, cmd->retries);
printk(" request buffer=0x%p, request buffer len=0x%x\n",
cmd->request_buffer, cmd->request_bufflen);
printk(" tag=%d, transfersize=0x%x\n",
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2e7ab3a..05d2bd0 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -489,7 +489,7 @@
scsi_print_command(cmd);
if (status_byte(cmd->result) & CHECK_CONDITION) {
/*
- * XXX The print_sense formatting/prefix
+ * XXX The scsi_print_sense formatting/prefix
* doesn't match this function.
*/
scsi_print_sense("", cmd);
@@ -686,7 +686,6 @@
cmd->request = sreq->sr_request;
memcpy(cmd->data_cmnd, sreq->sr_cmnd, sizeof(cmd->data_cmnd));
cmd->serial_number = 0;
- cmd->serial_number_at_timeout = 0;
cmd->bufflen = sreq->sr_bufflen;
cmd->buffer = sreq->sr_buffer;
cmd->retries = 0;
@@ -716,7 +715,6 @@
/*
* Start the timer ticking.
*/
- cmd->internal_timeout = NORMAL_TIMEOUT;
cmd->abort_reason = 0;
cmd->result = 0;
@@ -766,7 +764,6 @@
* Set the serial numbers back to zero
*/
cmd->serial_number = 0;
- cmd->serial_number_at_timeout = 0;
cmd->state = SCSI_STATE_BHQUEUE;
cmd->owner = SCSI_OWNER_BH_HANDLER;
diff --git a/drivers/scsi/scsi.h b/drivers/scsi/scsi.h
index cb6b5fb..e2360c2 100644
--- a/drivers/scsi/scsi.h
+++ b/drivers/scsi/scsi.h
@@ -23,7 +23,6 @@
#include <linux/config.h> /* for CONFIG_SCSI_LOGGING */
#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_request.h>
@@ -61,48 +60,6 @@
#define scsi_to_pci_dma_dir(scsi_dir) ((int)(scsi_dir))
#define scsi_to_sbus_dma_dir(scsi_dir) ((int)(scsi_dir))
-/*
- * Old names for debug prettyprinting functions.
- */
-static inline void print_Scsi_Cmnd(struct scsi_cmnd *cmd)
-{
- return scsi_print_command(cmd);
-}
-static inline void print_command(unsigned char *cdb)
-{
- return __scsi_print_command(cdb);
-}
-static inline void print_sense(const char *devclass, struct scsi_cmnd *cmd)
-{
- return scsi_print_sense(devclass, cmd);
-}
-static inline void print_req_sense(const char *devclass, struct scsi_request *req)
-{
- return scsi_print_req_sense(devclass, req);
-}
-static inline void print_driverbyte(int scsiresult)
-{
- return scsi_print_driverbyte(scsiresult);
-}
-static inline void print_hostbyte(int scsiresult)
-{
- return scsi_print_hostbyte(scsiresult);
-}
-static inline void print_status(unsigned char status)
-{
- return scsi_print_status(status);
-}
-static inline int print_msg(const unsigned char *msg)
-{
- return scsi_print_msg(msg);
-}
-
-/*
- * This is the crap from the old error handling code. We have it in a special
- * place so that we can more easily delete it later on.
- */
-#include "scsi_obsolete.h"
-
/* obsolete typedef junk. */
#include "scsi_typedefs.h"
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 9bc597b..203a081 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -79,11 +79,6 @@
*/
scmd->owner = SCSI_OWNER_ERROR_HANDLER;
scmd->state = SCSI_STATE_FAILED;
- /*
- * Set the serial_number_at_timeout to the current
- * serial_number
- */
- scmd->serial_number_at_timeout = scmd->serial_number;
list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
set_bit(SHOST_RECOVERY, &shost->shost_state);
shost->host_failed++;
@@ -1061,7 +1056,6 @@
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
__FUNCTION__));
scmd->owner = SCSI_OWNER_LOWLEVEL;
- scmd->serial_number_at_timeout = scmd->serial_number;
if (!scmd->device->host->hostt->eh_bus_reset_handler)
return FAILED;
@@ -1093,7 +1087,6 @@
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
__FUNCTION__));
scmd->owner = SCSI_OWNER_LOWLEVEL;
- scmd->serial_number_at_timeout = scmd->serial_number;
if (!scmd->device->host->hostt->eh_host_reset_handler)
return FAILED;
@@ -1313,6 +1306,9 @@
case DID_IMM_RETRY:
return NEEDS_RETRY;
+ case DID_REQUEUE:
+ return ADD_TO_MLQUEUE;
+
case DID_ERROR:
if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
status_byte(scmd->result) == RESERVATION_CONFLICT)
@@ -1839,7 +1835,6 @@
scmd->bufflen = 0;
scmd->request_buffer = NULL;
scmd->request_bufflen = 0;
- scmd->internal_timeout = NORMAL_TIMEOUT;
scmd->abort_reason = DID_ABORT;
scmd->cmd_len = 0;
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index 68c9728..7a6b530 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -27,11 +27,6 @@
#define NORMAL_RETRIES 5
#define IOCTL_NORMAL_TIMEOUT (10 * HZ)
-#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
-#define START_STOP_TIMEOUT (60 * HZ)
-#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
-#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
-#define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) /* ZIP-250 on parallel port takes as long! */
#define MAX_BUF PAGE_SIZE
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 7cbc412..619d3fb 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -298,7 +298,6 @@
{
cmd->owner = SCSI_OWNER_MIDLEVEL;
cmd->serial_number = 0;
- cmd->serial_number_at_timeout = 0;
cmd->abort_reason = 0;
memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
@@ -320,7 +319,6 @@
memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd));
cmd->buffer = cmd->request_buffer;
cmd->bufflen = cmd->request_bufflen;
- cmd->internal_timeout = NORMAL_TIMEOUT;
cmd->abort_reason = 0;
return 1;
diff --git a/drivers/scsi/scsi_obsolete.h b/drivers/scsi/scsi_obsolete.h
deleted file mode 100644
index abeacb9..0000000
--- a/drivers/scsi/scsi_obsolete.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * scsi_obsolete.h Copyright (C) 1997 Eric Youngdale
- *
- */
-
-#ifndef _SCSI_OBSOLETE_H
-#define _SCSI_OBSOLETE_H
-
-/*
- * These are the return codes for the abort and reset functions. The mid-level
- * code uses these to decide what to do next. Each of the low level abort
- * and reset functions must correctly indicate what it has done.
- * The descriptions are written from the point of view of the mid-level code,
- * so that the return code is telling the mid-level drivers exactly what
- * the low level driver has already done, and what remains to be done.
- */
-
-/* We did not do anything.
- * Wait some more for this command to complete, and if this does not work,
- * try something more serious. */
-#define SCSI_ABORT_SNOOZE 0
-
-/* This means that we were able to abort the command. We have already
- * called the mid-level done function, and do not expect an interrupt that
- * will lead to another call to the mid-level done function for this command */
-#define SCSI_ABORT_SUCCESS 1
-
-/* We called for an abort of this command, and we should get an interrupt
- * when this succeeds. Thus we should not restore the timer for this
- * command in the mid-level abort function. */
-#define SCSI_ABORT_PENDING 2
-
-/* Unable to abort - command is currently on the bus. Grin and bear it. */
-#define SCSI_ABORT_BUSY 3
-
-/* The command is not active in the low level code. Command probably
- * finished. */
-#define SCSI_ABORT_NOT_RUNNING 4
-
-/* Something went wrong. The low level driver will indicate the correct
- * error condition when it calls scsi_done, so the mid-level abort function
- * can simply wait until this comes through */
-#define SCSI_ABORT_ERROR 5
-
-/* We do not know how to reset the bus, or we do not want to. Bummer.
- * Anyway, just wait a little more for the command in question, and hope that
- * it eventually finishes. If it never finishes, the SCSI device could
- * hang, so use this with caution. */
-#define SCSI_RESET_SNOOZE 0
-
-/* We do not know how to reset the bus, or we do not want to. Bummer.
- * We have given up on this ever completing. The mid-level code will
- * request sense information to decide how to proceed from here. */
-#define SCSI_RESET_PUNT 1
-
-/* This means that we were able to reset the bus. We have restarted all of
- * the commands that should be restarted, and we should be able to continue
- * on normally from here. We do not expect any interrupts that will return
- * DID_RESET to any of the other commands in the host_queue, and the mid-level
- * code does not need to do anything special to keep the commands alive.
- * If a hard reset was performed then all outstanding commands on the
- * bus have been restarted. */
-#define SCSI_RESET_SUCCESS 2
-
-/* We called for a reset of this bus, and we should get an interrupt
- * when this succeeds. Each command should get its own status
- * passed up to scsi_done, but this has not happened yet.
- * If a hard reset was performed, then we expect an interrupt
- * for *each* of the outstanding commands that will have the
- * effect of restarting the commands.
- */
-#define SCSI_RESET_PENDING 3
-
-/* We did a reset, but do not expect an interrupt to signal DID_RESET.
- * This tells the upper level code to request the sense info, and this
- * should keep the command alive. */
-#define SCSI_RESET_WAKEUP 4
-
-/* The command is not active in the low level code. Command probably
- finished. */
-#define SCSI_RESET_NOT_RUNNING 5
-
-/* Something went wrong, and we do not know how to fix it. */
-#define SCSI_RESET_ERROR 6
-
-#define SCSI_RESET_SYNCHRONOUS 0x01
-#define SCSI_RESET_ASYNCHRONOUS 0x02
-#define SCSI_RESET_SUGGEST_BUS_RESET 0x04
-#define SCSI_RESET_SUGGEST_HOST_RESET 0x08
-/*
- * This is a bitmask that is ored with one of the above codes.
- * It tells the mid-level code that we did a hard reset.
- */
-#define SCSI_RESET_BUS_RESET 0x100
-/*
- * This is a bitmask that is ored with one of the above codes.
- * It tells the mid-level code that we did a host adapter reset.
- */
-#define SCSI_RESET_HOST_RESET 0x200
-/*
- * Used to mask off bits and to obtain the basic action that was
- * performed.
- */
-#define SCSI_RESET_ACTION 0xff
-
-#endif /* SCSI_OBSOLETE_H */
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index aca3b39..c01580df 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -30,11 +30,6 @@
#define SCSI_REQ_MAGIC 0x75F6D354
/*
- * Flag bit for the internal_timeout array
- */
-#define NORMAL_TIMEOUT 0
-
-/*
* Scsi Error Handler Flags
*/
#define scsi_eh_eflags_chk(scp, flags) \
diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c
index b362ff2..4c95abb 100644
--- a/drivers/scsi/seagate.c
+++ b/drivers/scsi/seagate.c
@@ -103,6 +103,7 @@
#include <asm/uaccess.h>
#include "scsi.h"
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
#include "seagate.h"
@@ -746,7 +747,7 @@
#if (DEBUG & PRINT_COMMAND)
printk("scsi%d : target = %d, command = ", hostno, target);
- print_command((unsigned char *) cmnd);
+ __scsi_print_command((unsigned char *) cmnd);
#endif
#if (DEBUG & PHASE_RESELECT)
@@ -1553,7 +1554,7 @@
printk("\n");
#endif
printk("scsi%d : status = ", hostno);
- print_status(status);
+ scsi_print_status(status);
printk(" message = %02x\n", message);
#endif
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index fd72d73..cf6b1f0 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -51,6 +51,7 @@
#include <linux/delay.h>
#include "scsi.h"
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_ioctl.h>
@@ -1311,7 +1312,7 @@
if ((sdp->sgdebug > 0) &&
((CHECK_CONDITION == srp->header.masked_status) ||
(COMMAND_TERMINATED == srp->header.masked_status)))
- print_req_sense("sg_cmd_done", SRpnt);
+ scsi_print_req_sense("sg_cmd_done", SRpnt);
/* Following if statement is a patch supplied by Eric Youngdale */
if (driver_byte(SRpnt->sr_result) != 0
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 9081139..7e19589 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -69,6 +69,7 @@
* finally replaced that by the *_PRINTK() macros.
*
*/
+#include <scsi/scsi_dbg.h>
/*
* Further development / testing that should be done :
@@ -2377,7 +2378,7 @@
* 3..length+1 arguments
*
* Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since print_msg() wants the whole thing.
+ * byte, since scsi_print_msg() wants the whole thing.
*/
extended_msg[0] = EXTENDED_MESSAGE;
/* Accept first byte by clearing ACK */
@@ -2430,7 +2431,7 @@
default:
if (!tmp) {
printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
- print_msg (extended_msg);
+ scsi_print_msg (extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
printk(KERN_DEBUG "scsi%d: rejecting unknown "
@@ -2565,7 +2566,7 @@
if (!(msg[0] & 0x80)) {
printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
- print_msg(msg);
+ scsi_print_msg(msg);
do_abort(instance);
return;
}
@@ -2691,7 +2692,7 @@
unsigned long flags;
printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- print_Scsi_Cmnd (cmd);
+ scsi_print_command(cmd);
NCR5380_print_status (instance);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index a1dff6d..5ff83d2 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -799,12 +799,6 @@
dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname);
-#if 0
- /* This one should be the result of some race, thus to ignore */
- if (cmd->serial_number != cmd->serial_number_at_timeout)
- goto prepare;
-#endif
-
/* This one is queued in some place -> to wait for completion */
FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 7484916..a00095c 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -945,7 +945,7 @@
config.mscp[mscp_index].SCint, SCpnt);
#endif
if (config.mscp[mscp_index].SCint == 0)
- return SCSI_ABORT_NOT_RUNNING;
+ return FAILURE;
if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort");
config.mscp[mscp_index].SCint = NULL;
@@ -1020,7 +1020,7 @@
#endif
spin_unlock_irqrestore(host->host_lock, flags);
- return SCSI_RESET_SUCCESS;
+ return SUCCESS;
}
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index de0d32f..cab89a9 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -335,7 +335,7 @@
mts_urb_abort(desc);
- return SCSI_ABORT_PENDING;
+ return FAILURE;
}
static int mts_scsi_host_reset (Scsi_Cmnd *srb)
diff --git a/fs/compat.c b/fs/compat.c
index a912bdf..67c0b94 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -31,6 +31,7 @@
#include <linux/smb.h>
#include <linux/smb_mount.h>
#include <linux/ncp_mount.h>
+#include <linux/nfs4_mount.h>
#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
@@ -806,10 +807,79 @@
return raw_data;
}
+struct compat_nfs_string {
+ compat_uint_t len;
+ compat_uptr_t __user data;
+};
+
+static inline void compat_nfs_string(struct nfs_string *dst,
+ struct compat_nfs_string *src)
+{
+ dst->data = compat_ptr(src->data);
+ dst->len = src->len;
+}
+
+struct compat_nfs4_mount_data_v1 {
+ compat_int_t version;
+ compat_int_t flags;
+ compat_int_t rsize;
+ compat_int_t wsize;
+ compat_int_t timeo;
+ compat_int_t retrans;
+ compat_int_t acregmin;
+ compat_int_t acregmax;
+ compat_int_t acdirmin;
+ compat_int_t acdirmax;
+ struct compat_nfs_string client_addr;
+ struct compat_nfs_string mnt_path;
+ struct compat_nfs_string hostname;
+ compat_uint_t host_addrlen;
+ compat_uptr_t __user host_addr;
+ compat_int_t proto;
+ compat_int_t auth_flavourlen;
+ compat_uptr_t __user auth_flavours;
+};
+
+static int do_nfs4_super_data_conv(void *raw_data)
+{
+ int version = *(compat_uint_t *) raw_data;
+
+ if (version == 1) {
+ struct compat_nfs4_mount_data_v1 *raw = raw_data;
+ struct nfs4_mount_data *real = raw_data;
+
+ /* copy the fields backwards */
+ real->auth_flavours = compat_ptr(raw->auth_flavours);
+ real->auth_flavourlen = raw->auth_flavourlen;
+ real->proto = raw->proto;
+ real->host_addr = compat_ptr(raw->host_addr);
+ real->host_addrlen = raw->host_addrlen;
+ compat_nfs_string(&real->hostname, &raw->hostname);
+ compat_nfs_string(&real->mnt_path, &raw->mnt_path);
+ compat_nfs_string(&real->client_addr, &raw->client_addr);
+ real->acdirmax = raw->acdirmax;
+ real->acdirmin = raw->acdirmin;
+ real->acregmax = raw->acregmax;
+ real->acregmin = raw->acregmin;
+ real->retrans = raw->retrans;
+ real->timeo = raw->timeo;
+ real->wsize = raw->wsize;
+ real->rsize = raw->rsize;
+ real->flags = raw->flags;
+ real->version = raw->version;
+ }
+ else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
extern int copy_mount_options (const void __user *, unsigned long *);
#define SMBFS_NAME "smbfs"
#define NCPFS_NAME "ncpfs"
+#define NFS4_NAME "nfs4"
asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name,
char __user * type, unsigned long flags,
@@ -845,6 +915,9 @@
do_smb_super_data_conv((void *)data_page);
} else if (!strcmp((char *)type_page, NCPFS_NAME)) {
do_ncp_super_data_conv((void *)data_page);
+ } else if (!strcmp((char *)type_page, NFS4_NAME)) {
+ if (do_nfs4_super_data_conv((void *) data_page))
+ goto out4;
}
}
@@ -853,6 +926,7 @@
flags, (void*)data_page);
unlock_kernel();
+ out4:
free_page(data_page);
out3:
free_page(dev_page);
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index d1f63ca..8467084 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -79,7 +79,7 @@
#define __NR_umask 60 /* Common */
#define __NR_chroot 61 /* Common */
#define __NR_fstat 62 /* Common */
-#define __NR_fstat64 63 /* Linux sparc32 Specific */
+#define __NR_fstat64 63 /* Linux Specific */
#define __NR_getpagesize 64 /* Common */
#define __NR_msync 65 /* Common in newer 1.3.x revs... */
#define __NR_vfork 66 /* Common */
@@ -148,14 +148,14 @@
#define __NR_truncate 129 /* Common */
#define __NR_ftruncate 130 /* Common */
#define __NR_flock 131 /* Common */
-#define __NR_lstat64 132 /* Linux sparc32 Specific */
+#define __NR_lstat64 132 /* Linux Specific */
#define __NR_sendto 133 /* Common */
#define __NR_shutdown 134 /* Common */
#define __NR_socketpair 135 /* Common */
#define __NR_mkdir 136 /* Common */
#define __NR_rmdir 137 /* Common */
#define __NR_utimes 138 /* SunOS Specific */
-#define __NR_stat64 139 /* Linux sparc32 Specific */
+#define __NR_stat64 139 /* Linux Specific */
#define __NR_sendfile64 140 /* adjtime under SunOS */
#define __NR_getpeername 141 /* Common */
#define __NR_futex 142 /* gethostid under SunOS */
diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h
index 2950279..22f5805 100644
--- a/include/asm-sparc64/compat.h
+++ b/include/asm-sparc64/compat.h
@@ -51,16 +51,50 @@
compat_dev_t st_rdev;
compat_off_t st_size;
compat_time_t st_atime;
- u32 __unused1;
+ compat_ulong_t st_atime_nsec;
compat_time_t st_mtime;
- u32 __unused2;
+ compat_ulong_t st_mtime_nsec;
compat_time_t st_ctime;
- u32 __unused3;
+ compat_ulong_t st_ctime_nsec;
compat_off_t st_blksize;
compat_off_t st_blocks;
u32 __unused4[2];
};
+struct compat_stat64 {
+ unsigned long long st_dev;
+
+ unsigned long long st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned int st_uid;
+ unsigned int st_gid;
+
+ unsigned long long st_rdev;
+
+ unsigned char __pad3[8];
+
+ long long st_size;
+ unsigned int st_blksize;
+
+ unsigned char __pad4[8];
+ unsigned int st_blocks;
+
+ unsigned int st_atime;
+ unsigned int st_atime_nsec;
+
+ unsigned int st_mtime;
+ unsigned int st_mtime_nsec;
+
+ unsigned int st_ctime;
+ unsigned int st_ctime_nsec;
+
+ unsigned int __unused4;
+ unsigned int __unused5;
+};
+
struct compat_flock {
short l_type;
short l_whence;
diff --git a/include/asm-sparc64/stat.h b/include/asm-sparc64/stat.h
index 48e0661..128c27e 100644
--- a/include/asm-sparc64/stat.h
+++ b/include/asm-sparc64/stat.h
@@ -21,43 +21,28 @@
unsigned long __unused4[2];
};
-#ifdef __KERNEL__
-/* This is sparc32 stat64 structure. */
-
struct stat64 {
- unsigned long long st_dev;
-
- unsigned long long st_ino;
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned long st_nlink;
unsigned int st_mode;
- unsigned int st_nlink;
-
unsigned int st_uid;
unsigned int st_gid;
+ unsigned int __pad0;
- unsigned long long st_rdev;
+ unsigned long st_rdev;
+ long st_size;
+ long st_blksize;
+ long st_blocks;
- unsigned char __pad3[8];
-
- long long st_size;
- unsigned int st_blksize;
-
- unsigned char __pad4[8];
- unsigned int st_blocks;
-
- unsigned int st_atime;
- unsigned int st_atime_nsec;
-
- unsigned int st_mtime;
- unsigned int st_mtime_nsec;
-
- unsigned int st_ctime;
- unsigned int st_ctime_nsec;
-
- unsigned int __unused4;
- unsigned int __unused5;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ long __unused[3];
};
#endif
-
-#endif
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index 3c00065..5b8dcf5 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -79,7 +79,7 @@
#define __NR_umask 60 /* Common */
#define __NR_chroot 61 /* Common */
#define __NR_fstat 62 /* Common */
-/* #define __NR_fstat64 63 Linux sparc32 Specific */
+#define __NR_fstat64 63 /* Linux Specific */
#define __NR_getpagesize 64 /* Common */
#define __NR_msync 65 /* Common in newer 1.3.x revs... */
#define __NR_vfork 66 /* Common */
@@ -148,14 +148,14 @@
#define __NR_truncate 129 /* Common */
#define __NR_ftruncate 130 /* Common */
#define __NR_flock 131 /* Common */
-/* #define __NR_lstat64 132 Linux sparc32 Specific */
+#define __NR_lstat64 132 /* Linux Specific */
#define __NR_sendto 133 /* Common */
#define __NR_shutdown 134 /* Common */
#define __NR_socketpair 135 /* Common */
#define __NR_mkdir 136 /* Common */
#define __NR_rmdir 137 /* Common */
#define __NR_utimes 138 /* SunOS Specific */
-/* #define __NR_stat64 139 Linux sparc32 Specific */
+#define __NR_stat64 139 /* Linux Specific */
#define __NR_sendfile64 140 /* adjtime under SunOS */
#define __NR_getpeername 141 /* Common */
#define __NR_futex 142 /* gethostid under SunOS */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 1d54c06..659ecf4 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -295,6 +295,8 @@
#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
+#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
+ * without decrementing the retry count */
#define DRIVER_OK 0x00 /* Driver status */
/*
@@ -360,6 +362,15 @@
#define sense_error(sense) ((sense) & 0xf)
#define sense_valid(sense) ((sense) & 0x80);
+/*
+ * default timeouts
+*/
+#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
+#define START_STOP_TIMEOUT (60 * HZ)
+#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
+#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
+#define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
+
#define IDENTIFY_BASE 0x80
#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 9d9871c..07f5c69 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -43,21 +43,17 @@
void (*done) (struct scsi_cmnd *); /* Mid-level done function */
/*
- * A SCSI Command is assigned a nonzero serial_number when internal_cmnd
- * passes it to the driver's queue command function. The serial_number
- * is cleared when scsi_done is entered indicating that the command has
- * been completed. If a timeout occurs, the serial number at the moment
- * of timeout is copied into serial_number_at_timeout. By subsequently
- * comparing the serial_number and serial_number_at_timeout fields
- * during abort or reset processing, we can detect whether the command
- * has already completed. This also detects cases where the command has
- * completed and the SCSI Command structure has already being reused
- * for another command, so that we can avoid incorrectly aborting or
- * resetting the new command.
- * The serial number is only unique per host.
+ * A SCSI Command is assigned a nonzero serial_number before passed
+ * to the driver's queue command function. The serial_number is
+ * cleared when scsi_done is entered indicating that the command
+ * has been completed. It currently doesn't have much use other
+ * than printk's. Some lldd's use this number for other purposes.
+ * It's almost certain that such usages are either incorrect or
+ * meaningless. Please kill all usages other than printk's. Also,
+ * as this number is always identical to ->pid, please convert
+ * printk's to use ->pid, so that we can kill this field.
*/
unsigned long serial_number;
- unsigned long serial_number_at_timeout;
int retries;
int allowed;
@@ -65,12 +61,6 @@
int timeout_total;
int timeout;
- /*
- * We handle the timeout differently if it happens when a reset,
- * abort, etc are in process.
- */
- unsigned volatile char internal_timeout;
-
unsigned char cmd_len;
unsigned char old_cmd_len;
enum dma_data_direction sc_data_direction;
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 8c45485..6f19313 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -610,6 +610,33 @@
printk(KERN_ERR "audit: freed %d contexts\n", count);
}
+static void audit_log_task_info(struct audit_buffer *ab)
+{
+ char name[sizeof(current->comm)];
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+
+ get_task_comm(name, current);
+ audit_log_format(ab, " comm=%s", name);
+
+ if (!mm)
+ return;
+
+ down_read(&mm->mmap_sem);
+ vma = mm->mmap;
+ while (vma) {
+ if ((vma->vm_flags & VM_EXECUTABLE) &&
+ vma->vm_file) {
+ audit_log_d_path(ab, "exe=",
+ vma->vm_file->f_dentry,
+ vma->vm_file->f_vfsmnt);
+ break;
+ }
+ vma = vma->vm_next;
+ }
+ up_read(&mm->mmap_sem);
+}
+
static void audit_log_exit(struct audit_context *context)
{
int i;
@@ -639,6 +666,7 @@
context->gid,
context->euid, context->suid, context->fsuid,
context->egid, context->sgid, context->fsgid);
+ audit_log_task_info(ab);
audit_log_end(ab);
while (context->aux) {
struct audit_aux_data *aux;
diff --git a/kernel/sched.c b/kernel/sched.c
index f69c4a5..9bb7489 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2648,9 +2648,9 @@
schedstat_inc(rq, sched_cnt);
now = sched_clock();
- if (likely((long long)now - prev->timestamp < NS_MAX_SLEEP_AVG)) {
+ if (likely((long long)(now - prev->timestamp) < NS_MAX_SLEEP_AVG)) {
run_time = now - prev->timestamp;
- if (unlikely((long long)now - prev->timestamp < 0))
+ if (unlikely((long long)(now - prev->timestamp) < 0))
run_time = 0;
} else
run_time = NS_MAX_SLEEP_AVG;
@@ -2728,7 +2728,7 @@
if (!rt_task(next) && next->activated > 0) {
unsigned long long delta = now - next->timestamp;
- if (unlikely((long long)now - next->timestamp < 0))
+ if (unlikely((long long)(now - next->timestamp) < 0))
delta = 0;
if (next->activated == 1)
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index fe6285e..85a6f66 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -532,7 +532,6 @@
u16 tclass, u32 requested,
struct av_decision *avd, int result, struct avc_audit_data *a)
{
- struct task_struct *tsk = current;
struct inode *inode = NULL;
u32 denied, audited;
struct audit_buffer *ab;
@@ -556,39 +555,6 @@
audit_log_format(ab, "avc: %s ", denied ? "denied" : "granted");
avc_dump_av(ab, tclass,audited);
audit_log_format(ab, " for ");
- if (a && a->tsk)
- tsk = a->tsk;
- if (tsk && tsk->pid) {
- struct mm_struct *mm;
- struct vm_area_struct *vma;
- audit_log_format(ab, " pid=%d", tsk->pid);
- if (tsk == current)
- mm = current->mm;
- else
- mm = get_task_mm(tsk);
- if (mm) {
- if (down_read_trylock(&mm->mmap_sem)) {
- vma = mm->mmap;
- while (vma) {
- if ((vma->vm_flags & VM_EXECUTABLE) &&
- vma->vm_file) {
- audit_log_d_path(ab, "exe=",
- vma->vm_file->f_dentry,
- vma->vm_file->f_vfsmnt);
- break;
- }
- vma = vma->vm_next;
- }
- up_read(&mm->mmap_sem);
- } else {
- audit_log_format(ab, " comm=%s", tsk->comm);
- }
- if (tsk != current)
- mmput(mm);
- } else {
- audit_log_format(ab, " comm=%s", tsk->comm);
- }
- }
if (a) {
switch (a->type) {
case AVC_AUDIT_DATA_IPC: