imx2x: convert serial.c to use soc-prefixed constants
This makes the file compilable for a kernel that supports both imx21 and
imx27.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 40a485c..1c0c835 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -26,12 +26,12 @@
static struct resource uart0[] = {
{
- .start = UART1_BASE_ADDR,
- .end = UART1_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART1_BASE_ADDR,
+ .end = MX2x_UART1_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART1,
- .end = MXC_INT_UART1,
+ .start = MX2x_INT_UART1,
+ .end = MX2x_INT_UART1,
.flags = IORESOURCE_IRQ,
},
};
@@ -45,12 +45,12 @@
static struct resource uart1[] = {
{
- .start = UART2_BASE_ADDR,
- .end = UART2_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART2_BASE_ADDR,
+ .end = MX2x_UART2_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART2,
- .end = MXC_INT_UART2,
+ .start = MX2x_INT_UART2,
+ .end = MX2x_INT_UART2,
.flags = IORESOURCE_IRQ,
},
};
@@ -64,12 +64,12 @@
static struct resource uart2[] = {
{
- .start = UART3_BASE_ADDR,
- .end = UART3_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART3_BASE_ADDR,
+ .end = MX2x_UART3_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART3,
- .end = MXC_INT_UART3,
+ .start = MX2x_INT_UART3,
+ .end = MX2x_INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
@@ -83,12 +83,12 @@
static struct resource uart3[] = {
{
- .start = UART4_BASE_ADDR,
- .end = UART4_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART4_BASE_ADDR,
+ .end = MX2x_UART4_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART4,
- .end = MXC_INT_UART4,
+ .start = MX2x_INT_UART4,
+ .end = MX2x_INT_UART4,
.flags = IORESOURCE_IRQ,
},
};
@@ -103,12 +103,12 @@
#ifdef CONFIG_MACH_MX27
static struct resource uart4[] = {
{
- .start = UART5_BASE_ADDR,
- .end = UART5_BASE_ADDR + 0x0B5,
+ .start = MX27_UART5_BASE_ADDR,
+ .end = MX27_UART5_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART5,
- .end = MXC_INT_UART5,
+ .start = MX27_INT_UART5,
+ .end = MX27_INT_UART5,
.flags = IORESOURCE_IRQ,
},
};
@@ -122,12 +122,12 @@
static struct resource uart5[] = {
{
- .start = UART6_BASE_ADDR,
- .end = UART6_BASE_ADDR + 0x0B5,
+ .start = MX27_UART6_BASE_ADDR,
+ .end = MX27_UART6_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART6,
- .end = MXC_INT_UART6,
+ .start = MX27_INT_UART6,
+ .end = MX27_INT_UART6,
.flags = IORESOURCE_IRQ,
},
};