SPEAr: Remove existing padmux support for SPEAr
We must use pinctrl framework instead of defining per SoC pinmux drivers. This
patch removes existing padmux support present for SPEAr platform.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 063e7da..aec07c9 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -22,128 +22,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG 0x08
-
-/* devices */
-static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
- .name = "emi_cs_0_1_4_5",
- .modes = pmx_emi_cs_0_1_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_emi_cs_2_3 = {
- .name = "emi_cs_2_3",
- .modes = pmx_emi_cs_2_3_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart1 = {
- .name = "uart1",
- .modes = pmx_uart1_modes,
- .mode_count = ARRAY_SIZE(pmx_uart1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart2 = {
- .name = "uart2",
- .modes = pmx_uart2_modes,
- .mode_count = ARRAY_SIZE(pmx_uart2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart3_4_5 = {
- .name = "uart3_4_5",
- .modes = pmx_uart3_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_fsmc = {
- .name = "fsmc",
- .modes = pmx_fsmc_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_rs485_0_1 = {
- .name = "rs485_0_1",
- .modes = pmx_rs485_0_1_modes,
- .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_tdm0_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_tdm0 = {
- .name = "tdm0",
- .modes = pmx_tdm0_modes,
- .mode_count = ARRAY_SIZE(pmx_tdm0_modes),
- .enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
- .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -260,30 +138,6 @@
},
};
-/* padmux devices to enable */
-static struct pmx_dev *spear310_evb_pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_gpio_pin0,
- &spear3xx_pmx_gpio_pin1,
- &spear3xx_pmx_gpio_pin2,
- &spear3xx_pmx_gpio_pin3,
- &spear3xx_pmx_gpio_pin4,
- &spear3xx_pmx_gpio_pin5,
- &spear3xx_pmx_uart0,
-
- /* spear310 specific devices */
- &spear310_pmx_emi_cs_0_1_4_5,
- &spear310_pmx_emi_cs_2_3,
- &spear310_pmx_uart1,
- &spear310_pmx_uart2,
- &spear310_pmx_uart3_4_5,
- &spear310_pmx_fsmc,
- &spear310_pmx_rs485_0_1,
- &spear310_pmx_tdm0,
-};
-
/* DMAC platform data's slave info */
struct pl08x_channel_data spear310_dma_info[] = {
{
@@ -518,7 +372,7 @@
static void __init spear310_dt_init(void)
{
void __iomem *base;
- int ret = 0;
+ int ret;
pl080_plat_data.slave_channels = spear310_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
@@ -553,19 +407,6 @@
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
-
- if (of_machine_is_compatible("st,spear310-evb")) {
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = NULL;
- pmx_driver.devs = spear310_evb_pmx_devs;
- pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
-
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- }
}
static const char * const spear310_dt_board_compat[] = {